[PATCH AUTOSEL 5.4 06/74] net: pch_gbe: Use proper accessors to BE data in pch_ptp_match()

[PATCH AUTOSEL 5.4 06/74] net: pch_gbe: Use proper accessors to BE data in pch_ptp_match()

[Sasha Levin]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit 443ef39b499cc9c6635f83238101f1bb923e9326 ]

Sparse is not happy about handling of strict types in pch_ptp_match():

  .../pch_gbe_main.c:158:33: warning: incorrect type in argument 2 (different base types)
  .../pch_gbe_main.c:158:33:    expected unsigned short [usertype] uid_hi
  .../pch_gbe_main.c:158:33:    got restricted __be16 [usertype]
  .../pch_gbe_main.c:158:45: warning: incorrect type in argument 3 (different base types)
  .../pch_gbe_main.c:158:45:    expected unsigned int [usertype] uid_lo
  .../pch_gbe_main.c:158:45:    got restricted __be32 [usertype]
  .../pch_gbe_main.c:158:56: warning: incorrect type in argument 4 (different base types)
  .../pch_gbe_main.c:158:56:    expected unsigned short [usertype] seqid
  .../pch_gbe_main.c:158:56:    got restricted __be16 [usertype]

Fix that by switching to use proper accessors to BE data.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Flavio Suligoi <f.suligoi@asem.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../ethernet/oki-semi/pch_gbe/pch_gbe_main.c  | 19 ++++++-------------
 1 file changed, 6 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index 18e6d87c607b..d7cfbc400091 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -107,7 +107,7 @@ static int pch_ptp_match(struct sk_buff *skb, u16 uid_hi, u32 uid_lo, u16 seqid)
 {
 	u8 *data = skb->data;
 	unsigned int offset;
-	u16 *hi, *id;
+	u16 hi, id;
 	u32 lo;
 
 	if (ptp_classify_raw(skb) == PTP_CLASS_NONE)
@@ -118,14 +118,11 @@ static int pch_ptp_match(struct sk_buff *skb, u16 uid_hi, u32 uid_lo, u16 seqid)
 	if (skb->len < offset + OFF_PTP_SEQUENCE_ID + sizeof(seqid))
 		return 0;
 
-	hi = (u16 *)(data + offset + OFF_PTP_SOURCE_UUID);
-	id = (u16 *)(data + offset + OFF_PTP_SEQUENCE_ID);
+	hi = get_unaligned_be16(data + offset + OFF_PTP_SOURCE_UUID + 0);
+	lo = get_unaligned_be32(data + offset + OFF_PTP_SOURCE_UUID + 2);
+	id = get_unaligned_be16(data + offset + OFF_PTP_SEQUENCE_ID);
 
-	memcpy(&lo, &hi[1], sizeof(lo));
-
-	return (uid_hi == *hi &&
-		uid_lo == lo &&
-		seqid  == *id);
+	return (uid_hi == hi && uid_lo == lo && seqid == id);
 }
 
 static void
@@ -135,7 +132,6 @@ pch_rx_timestamp(struct pch_gbe_adapter *adapter, struct sk_buff *skb)
 	struct pci_dev *pdev;
 	u64 ns;
 	u32 hi, lo, val;
-	u16 uid, seq;
 
 	if (!adapter->hwts_rx_en)
 		return;
@@ -151,10 +147,7 @@ pch_rx_timestamp(struct pch_gbe_adapter *adapter, struct sk_buff *skb)
 	lo = pch_src_uuid_lo_read(pdev);
 	hi = pch_src_uuid_hi_read(pdev);
 
-	uid = hi & 0xffff;
-	seq = (hi >> 16) & 0xffff;
-
-	if (!pch_ptp_match(skb, htons(uid), htonl(lo), htons(seq)))
+	if (!pch_ptp_match(skb, hi, lo, hi >> 16))
 		goto out;
 
 	ns = pch_rx_snap_read(pdev);
-- 
2.30.2

[PATCH AUTOSEL 5.4 09/74] atm: iphase: fix possible use-after-free in ia_module_exit()

[Sasha Levin]

From: Zou Wei <zou_wei@huawei.com>

[ Upstream commit 1c72e6ab66b9598cac741ed397438a52065a8f1f ]

This module's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.

Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/atm/iphase.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index 8c7a996d1f16..46990352b5d3 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -3295,7 +3295,7 @@ static void __exit ia_module_exit(void)
 {
 	pci_unregister_driver(&ia_driver);
 
-        del_timer(&ia_timer);
+	del_timer_sync(&ia_timer);
 }
 
 module_init(ia_module_init);
-- 
2.30.2

[PATCH AUTOSEL 5.4 10/74] mISDN: fix possible use-after-free in HFC_cleanup()

[Sasha Levin]

From: Zou Wei <zou_wei@huawei.com>

[ Upstream commit 009fc857c5f6fda81f2f7dd851b2d54193a8e733 ]

This module's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.

Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/isdn/hardware/mISDN/hfcpci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/isdn/hardware/mISDN/hfcpci.c b/drivers/isdn/hardware/mISDN/hfcpci.c
index 2330a7d24267..a2b2ce1dfec8 100644
--- a/drivers/isdn/hardware/mISDN/hfcpci.c
+++ b/drivers/isdn/hardware/mISDN/hfcpci.c
@@ -2341,7 +2341,7 @@ static void __exit
 HFC_cleanup(void)
 {
 	if (timer_pending(&hfc_tl))
-		del_timer(&hfc_tl);
+		del_timer_sync(&hfc_tl);
 
 	pci_unregister_driver(&hfc_driver);
 }
-- 
2.30.2

[PATCH AUTOSEL 5.4 11/74] atm: nicstar: Fix possible use-after-free in nicstar_cleanup()

[Sasha Levin]

From: Zou Wei <zou_wei@huawei.com>

[ Upstream commit 34e7434ba4e97f4b85c1423a59b2922ba7dff2ea ]

This module's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.

Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/atm/nicstar.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/atm/nicstar.c b/drivers/atm/nicstar.c
index bb9835c62641..5ec7b6a60145 100644
--- a/drivers/atm/nicstar.c
+++ b/drivers/atm/nicstar.c
@@ -297,7 +297,7 @@ static void __exit nicstar_cleanup(void)
 {
 	XPRINTK("nicstar: nicstar_cleanup() called.\n");
 
-	del_timer(&ns_timer);
+	del_timer_sync(&ns_timer);
 
 	pci_unregister_driver(&nicstar_driver);
 
-- 
2.30.2

[PATCH AUTOSEL 5.4 12/74] net: Treat __napi_schedule_irqoff() as __napi_schedule() on PREEMPT_RT

[Sasha Levin]

From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

[ Upstream commit 8380c81d5c4fced6f4397795a5ae65758272bbfd ]

__napi_schedule_irqoff() is an optimized version of __napi_schedule()
which can be used where it is known that interrupts are disabled,
e.g. in interrupt-handlers, spin_lock_irq() sections or hrtimer
callbacks.

On PREEMPT_RT enabled kernels this assumptions is not true. Force-
threaded interrupt handlers and spinlocks are not disabling interrupts
and the NAPI hrtimer callback is forced into softirq context which runs
with interrupts enabled as well.

Chasing all usage sites of __napi_schedule_irqoff() is a whack-a-mole
game so make __napi_schedule_irqoff() invoke __napi_schedule() for
PREEMPT_RT kernels.

The callers of ____napi_schedule() in the networking core have been
audited and are correct on PREEMPT_RT kernels as well.

Reported-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/dev.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/net/core/dev.c b/net/core/dev.c
index e226f266da9e..3810eaf89b26 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -5972,11 +5972,18 @@ EXPORT_SYMBOL(napi_schedule_prep);
  * __napi_schedule_irqoff - schedule for receive
  * @n: entry to schedule
  *
- * Variant of __napi_schedule() assuming hard irqs are masked
+ * Variant of __napi_schedule() assuming hard irqs are masked.
+ *
+ * On PREEMPT_RT enabled kernels this maps to __napi_schedule()
+ * because the interrupt disabled assumption might not be true
+ * due to force-threaded interrupts and spinlock substitution.
  */
 void __napi_schedule_irqoff(struct napi_struct *n)
 {
-	____napi_schedule(this_cpu_ptr(&softnet_data), n);
+	if (!IS_ENABLED(CONFIG_PREEMPT_RT))
+		____napi_schedule(this_cpu_ptr(&softnet_data), n);
+	else
+		__napi_schedule(n);
 }
 EXPORT_SYMBOL(__napi_schedule_irqoff);
 
-- 
2.30.2

[PATCH AUTOSEL 5.4 17/74] bpf: Check for BPF_F_ADJ_ROOM_FIXED_GSO when bpf_skb_change_proto

[Sasha Levin]

From: Dongseok Yi <dseok.yi@samsung.com>

[ Upstream commit fa7b83bf3b156c767f3e4a25bbf3817b08f3ff8e ]

In the forwarding path GRO -> BPF 6 to 4 -> GSO for TCP traffic, the
coalesced packet payload can be > MSS, but < MSS + 20.

bpf_skb_proto_6_to_4() will upgrade the MSS and it can be > the payload
length. After then tcp_gso_segment checks for the payload length if it
is <= MSS. The condition is causing the packet to be dropped.

tcp_gso_segment():
        [...]
        mss = skb_shinfo(skb)->gso_size;
        if (unlikely(skb->len <= mss))
                goto out;
        [...]

Allow to upgrade/downgrade MSS only when BPF_F_ADJ_ROOM_FIXED_GSO is
not set.

Signed-off-by: Dongseok Yi <dseok.yi@samsung.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/bpf/1620804453-57566-1-git-send-email-dseok.yi@samsung.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/filter.c | 22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)

diff --git a/net/core/filter.c b/net/core/filter.c
index 108bcf600052..823e77846525 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -2833,7 +2833,7 @@ static int bpf_skb_net_hdr_pop(struct sk_buff *skb, u32 off, u32 len)
 	return ret;
 }
 
-static int bpf_skb_proto_4_to_6(struct sk_buff *skb)
+static int bpf_skb_proto_4_to_6(struct sk_buff *skb, u64 flags)
 {
 	const u32 len_diff = sizeof(struct ipv6hdr) - sizeof(struct iphdr);
 	u32 off = skb_mac_header_len(skb);
@@ -2862,7 +2862,9 @@ static int bpf_skb_proto_4_to_6(struct sk_buff *skb)
 		}
 
 		/* Due to IPv6 header, MSS needs to be downgraded. */
-		skb_decrease_gso_size(shinfo, len_diff);
+		if (!(flags & BPF_F_ADJ_ROOM_FIXED_GSO))
+			skb_decrease_gso_size(shinfo, len_diff);
+
 		/* Header must be checked, and gso_segs recomputed. */
 		shinfo->gso_type |= SKB_GSO_DODGY;
 		shinfo->gso_segs = 0;
@@ -2874,7 +2876,7 @@ static int bpf_skb_proto_4_to_6(struct sk_buff *skb)
 	return 0;
 }
 
-static int bpf_skb_proto_6_to_4(struct sk_buff *skb)
+static int bpf_skb_proto_6_to_4(struct sk_buff *skb, u64 flags)
 {
 	const u32 len_diff = sizeof(struct ipv6hdr) - sizeof(struct iphdr);
 	u32 off = skb_mac_header_len(skb);
@@ -2903,7 +2905,9 @@ static int bpf_skb_proto_6_to_4(struct sk_buff *skb)
 		}
 
 		/* Due to IPv4 header, MSS can be upgraded. */
-		skb_increase_gso_size(shinfo, len_diff);
+		if (!(flags & BPF_F_ADJ_ROOM_FIXED_GSO))
+			skb_increase_gso_size(shinfo, len_diff);
+
 		/* Header must be checked, and gso_segs recomputed. */
 		shinfo->gso_type |= SKB_GSO_DODGY;
 		shinfo->gso_segs = 0;
@@ -2915,17 +2919,17 @@ static int bpf_skb_proto_6_to_4(struct sk_buff *skb)
 	return 0;
 }
 
-static int bpf_skb_proto_xlat(struct sk_buff *skb, __be16 to_proto)
+static int bpf_skb_proto_xlat(struct sk_buff *skb, __be16 to_proto, u64 flags)
 {
 	__be16 from_proto = skb->protocol;
 
 	if (from_proto == htons(ETH_P_IP) &&
 	      to_proto == htons(ETH_P_IPV6))
-		return bpf_skb_proto_4_to_6(skb);
+		return bpf_skb_proto_4_to_6(skb, flags);
 
 	if (from_proto == htons(ETH_P_IPV6) &&
 	      to_proto == htons(ETH_P_IP))
-		return bpf_skb_proto_6_to_4(skb);
+		return bpf_skb_proto_6_to_4(skb, flags);
 
 	return -ENOTSUPP;
 }
@@ -2935,7 +2939,7 @@ BPF_CALL_3(bpf_skb_change_proto, struct sk_buff *, skb, __be16, proto,
 {
 	int ret;
 
-	if (unlikely(flags))
+	if (unlikely(flags & ~(BPF_F_ADJ_ROOM_FIXED_GSO)))
 		return -EINVAL;
 
 	/* General idea is that this helper does the basic groundwork
@@ -2955,7 +2959,7 @@ BPF_CALL_3(bpf_skb_change_proto, struct sk_buff *, skb, __be16, proto,
 	 * that. For offloads, we mark packet as dodgy, so that headers
 	 * need to be verified first.
 	 */
-	ret = bpf_skb_proto_xlat(skb, proto);
+	ret = bpf_skb_proto_xlat(skb, proto, flags);
 	bpf_compute_data_pointers(skb);
 	return ret;
 }
-- 
2.30.2

[PATCH AUTOSEL 5.4 20/74] e100: handle eeprom as little endian

[Sasha Levin]

From: Jesse Brandeburg <jesse.brandeburg@intel.com>

[ Upstream commit d4ef55288aa2e1b76033717242728ac98ddc4721 ]

Sparse tool was warning on some implicit conversions from
little endian data read from the EEPROM on the e100 cards.

Fix these by being explicit about the conversions using
le16_to_cpu().

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/e100.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c
index a65d5a9ba7db..911b3d2a94e1 100644
--- a/drivers/net/ethernet/intel/e100.c
+++ b/drivers/net/ethernet/intel/e100.c
@@ -1398,7 +1398,7 @@ static int e100_phy_check_without_mii(struct nic *nic)
 	u8 phy_type;
 	int without_mii;
 
-	phy_type = (nic->eeprom[eeprom_phy_iface] >> 8) & 0x0f;
+	phy_type = (le16_to_cpu(nic->eeprom[eeprom_phy_iface]) >> 8) & 0x0f;
 
 	switch (phy_type) {
 	case NoSuchPhy: /* Non-MII PHY; UNTESTED! */
@@ -1518,7 +1518,7 @@ static int e100_phy_init(struct nic *nic)
 		mdio_write(netdev, nic->mii.phy_id, MII_BMCR, bmcr);
 	} else if ((nic->mac >= mac_82550_D102) || ((nic->flags & ich) &&
 	   (mdio_read(netdev, nic->mii.phy_id, MII_TPISTATUS) & 0x8000) &&
-		(nic->eeprom[eeprom_cnfg_mdix] & eeprom_mdix_enabled))) {
+	   (le16_to_cpu(nic->eeprom[eeprom_cnfg_mdix]) & eeprom_mdix_enabled))) {
 		/* enable/disable MDI/MDI-X auto-switching. */
 		mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG,
 				nic->mii.force_media ? 0 : NCONFIG_AUTO_SWITCH);
@@ -2266,9 +2266,9 @@ static int e100_asf(struct nic *nic)
 {
 	/* ASF can be enabled from eeprom */
 	return (nic->pdev->device >= 0x1050) && (nic->pdev->device <= 0x1057) &&
-	   (nic->eeprom[eeprom_config_asf] & eeprom_asf) &&
-	   !(nic->eeprom[eeprom_config_asf] & eeprom_gcl) &&
-	   ((nic->eeprom[eeprom_smbus_addr] & 0xFF) != 0xFE);
+	   (le16_to_cpu(nic->eeprom[eeprom_config_asf]) & eeprom_asf) &&
+	   !(le16_to_cpu(nic->eeprom[eeprom_config_asf]) & eeprom_gcl) &&
+	   ((le16_to_cpu(nic->eeprom[eeprom_smbus_addr]) & 0xFF) != 0xFE);
 }
 
 static int e100_up(struct nic *nic)
@@ -2924,7 +2924,7 @@ static int e100_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	/* Wol magic packet can be enabled from eeprom */
 	if ((nic->mac >= mac_82558_D101_A4) &&
-	   (nic->eeprom[eeprom_id] & eeprom_id_wol)) {
+	   (le16_to_cpu(nic->eeprom[eeprom_id]) & eeprom_id_wol)) {
 		nic->flags |= wol_magic;
 		device_set_wakeup_enable(&pdev->dev, true);
 	}
-- 
2.30.2

[PATCH AUTOSEL 5.4 21/74] igb: handle vlan types with checker enabled

[Sasha Levin]

From: Jesse Brandeburg <jesse.brandeburg@intel.com>

[ Upstream commit c7cbfb028b95360403d579c47aaaeef1ff140964 ]

The sparse build (C=2) finds some issues with how the driver
dealt with the (very difficult) hardware that in some generations
uses little-endian, and in others uses big endian, for the VLAN
field. The code as written picks __le16 as a type and for some
hardware revisions we override it to __be16 as done in this
patch. This impacted the VF driver as well so fix it there too.

Also change the vlan_tci assignment to override the sparse
warning without changing functionality.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 5 +++--
 drivers/net/ethernet/intel/igbvf/netdev.c | 4 ++--
 2 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 7a4e2b014dd6..c37f0590b3a4 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -2651,7 +2651,8 @@ static int igb_parse_cls_flower(struct igb_adapter *adapter,
 			}
 
 			input->filter.match_flags |= IGB_FILTER_FLAG_VLAN_TCI;
-			input->filter.vlan_tci = match.key->vlan_priority;
+			input->filter.vlan_tci =
+				(__force __be16)match.key->vlan_priority;
 		}
 	}
 
@@ -8255,7 +8256,7 @@ static void igb_process_skb_fields(struct igb_ring *rx_ring,
 
 		if (igb_test_staterr(rx_desc, E1000_RXDEXT_STATERR_LB) &&
 		    test_bit(IGB_RING_FLAG_RX_LB_VLAN_BSWAP, &rx_ring->flags))
-			vid = be16_to_cpu(rx_desc->wb.upper.vlan);
+			vid = be16_to_cpu((__force __be16)rx_desc->wb.upper.vlan);
 		else
 			vid = le16_to_cpu(rx_desc->wb.upper.vlan);
 
diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c
index 0f2b68f4bb0f..77cb2ab7dab4 100644
--- a/drivers/net/ethernet/intel/igbvf/netdev.c
+++ b/drivers/net/ethernet/intel/igbvf/netdev.c
@@ -83,14 +83,14 @@ static int igbvf_desc_unused(struct igbvf_ring *ring)
 static void igbvf_receive_skb(struct igbvf_adapter *adapter,
 			      struct net_device *netdev,
 			      struct sk_buff *skb,
-			      u32 status, u16 vlan)
+			      u32 status, __le16 vlan)
 {
 	u16 vid;
 
 	if (status & E1000_RXD_STAT_VP) {
 		if ((adapter->flags & IGBVF_FLAG_RX_LB_VLAN_BSWAP) &&
 		    (status & E1000_RXDEXT_STATERR_LB))
-			vid = be16_to_cpu(vlan) & E1000_RXD_SPC_VLAN_MASK;
+			vid = be16_to_cpu((__force __be16)vlan) & E1000_RXD_SPC_VLAN_MASK;
 		else
 			vid = le16_to_cpu(vlan) & E1000_RXD_SPC_VLAN_MASK;
 		if (test_bit(vid, adapter->active_vlans))
-- 
2.30.2

[PATCH AUTOSEL 5.4 25/74] ipv6: use prandom_u32() for ID generation

[Sasha Levin]

From: Willy Tarreau <w@1wt.eu>

[ Upstream commit 62f20e068ccc50d6ab66fdb72ba90da2b9418c99 ]

This is a complement to commit aa6dd211e4b1 ("inet: use bigger hash
table for IP ID generation"), but focusing on some specific aspects
of IPv6.

Contary to IPv4, IPv6 only uses packet IDs with fragments, and with a
minimum MTU of 1280, it's much less easy to force a remote peer to
produce many fragments to explore its ID sequence. In addition packet
IDs are 32-bit in IPv6, which further complicates their analysis. On
the other hand, it is often easier to choose among plenty of possible
source addresses and partially work around the bigger hash table the
commit above permits, which leaves IPv6 partially exposed to some
possibilities of remote analysis at the risk of weakening some
protocols like DNS if some IDs can be predicted with a good enough
probability.

Given the wide range of permitted IDs, the risk of collision is extremely
low so there's no need to rely on the positive increment algorithm that
is shared with the IPv4 code via ip_idents_reserve(). We have a fast
PRNG, so let's simply call prandom_u32() and be done with it.

Performance measurements at 10 Gbps couldn't show any difference with
the previous code, even when using a single core, because due to the
large fragments, we're limited to only ~930 kpps at 10 Gbps and the cost
of the random generation is completely offset by other operations and by
the network transfer time. In addition, this change removes the need to
update a shared entry in the idents table so it may even end up being
slightly faster on large scale systems where this matters.

The risk of at least one collision here is about 1/80 million among
10 IDs, 1/850k among 100 IDs, and still only 1/8.5k among 1000 IDs,
which remains very low compared to IPv4 where all IDs are reused
every 4 to 80ms on a 10 Gbps flow depending on packet sizes.

Reported-by: Amit Klein <aksecurity@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210529110746.6796-1-w@1wt.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/output_core.c | 28 +++++-----------------------
 1 file changed, 5 insertions(+), 23 deletions(-)

diff --git a/net/ipv6/output_core.c b/net/ipv6/output_core.c
index af36acc1a644..2880dc7d9a49 100644
--- a/net/ipv6/output_core.c
+++ b/net/ipv6/output_core.c
@@ -15,29 +15,11 @@ static u32 __ipv6_select_ident(struct net *net,
 			       const struct in6_addr *dst,
 			       const struct in6_addr *src)
 {
-	const struct {
-		struct in6_addr dst;
-		struct in6_addr src;
-	} __aligned(SIPHASH_ALIGNMENT) combined = {
-		.dst = *dst,
-		.src = *src,
-	};
-	u32 hash, id;
-
-	/* Note the following code is not safe, but this is okay. */
-	if (unlikely(siphash_key_is_zero(&net->ipv4.ip_id_key)))
-		get_random_bytes(&net->ipv4.ip_id_key,
-				 sizeof(net->ipv4.ip_id_key));
-
-	hash = siphash(&combined, sizeof(combined), &net->ipv4.ip_id_key);
-
-	/* Treat id of 0 as unset and if we get 0 back from ip_idents_reserve,
-	 * set the hight order instead thus minimizing possible future
-	 * collisions.
-	 */
-	id = ip_idents_reserve(hash, 1);
-	if (unlikely(!id))
-		id = 1 << 31;
+	u32 id;
+
+	do {
+		id = prandom_u32();
+	} while (!id);
 
 	return id;
 }
-- 
2.30.2

[PATCH AUTOSEL 5.4 29/74] ice: set the value of global config lock timeout longer

[Sasha Levin]

From: Liwei Song <liwei.song@windriver.com>

[ Upstream commit fb3612840d4f587a0af9511a11d7989d1fa48206 ]

It may need hold Global Config Lock a longer time when download DDP
package file, extend the timeout value to 5000ms to ensure that
download can be finished before other AQ command got time to run,
this will fix the issue below when probe the device, 5000ms is a test
value that work with both Backplane and BreakoutCable NVM image:

ice 0000:f4:00.0: VSI 12 failed lan queue config, error ICE_ERR_CFG
ice 0000:f4:00.0: Failed to delete VSI 12 in FW - error: ICE_ERR_AQ_TIMEOUT
ice 0000:f4:00.0: probe failed due to setup PF switch: -12
ice: probe of 0000:f4:00.0 failed with error -12

Signed-off-by: Liwei Song <liwei.song@windriver.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_type.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_type.h b/drivers/net/ethernet/intel/ice/ice_type.h
index 6667d17a4206..0b2e657b96eb 100644
--- a/drivers/net/ethernet/intel/ice/ice_type.h
+++ b/drivers/net/ethernet/intel/ice/ice_type.h
@@ -48,7 +48,7 @@ enum ice_aq_res_ids {
 /* FW update timeout definitions are in milliseconds */
 #define ICE_NVM_TIMEOUT			180000
 #define ICE_CHANGE_LOCK_TIMEOUT		1000
-#define ICE_GLOBAL_CFG_LOCK_TIMEOUT	3000
+#define ICE_GLOBAL_CFG_LOCK_TIMEOUT	5000
 
 enum ice_aq_res_access_type {
 	ICE_RES_READ = 1,
-- 
2.30.2

[PATCH AUTOSEL 5.4 30/74] virtio_net: Remove BUG() to avoid machine dead

[Sasha Levin]

From: Xianting Tian <xianting.tian@linux.alibaba.com>

[ Upstream commit 85eb1389458d134bdb75dad502cc026c3753a619 ]

We should not directly BUG() when there is hdr error, it is
better to output a print when such error happens. Currently,
the caller of xmit_skb() already did it.

Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/virtio_net.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index d8ee001d8e8e..5cd55f950032 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -1548,7 +1548,7 @@ static int xmit_skb(struct send_queue *sq, struct sk_buff *skb)
 	if (virtio_net_hdr_from_skb(skb, &hdr->hdr,
 				    virtio_is_little_endian(vi->vdev), false,
 				    0))
-		BUG();
+		return -EPROTO;
 
 	if (vi->mergeable_rx_bufs)
 		hdr->num_buffers = 0;
-- 
2.30.2

[PATCH AUTOSEL 5.4 31/74] net: bcmgenet: check return value after calling platform_get_resource()

[Sasha Levin]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 74325bf0104573c6dfce42837139aeef3f34be76 ]

It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/genet/bcmmii.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c
index dbe18cdf6c1b..ce569b7d3b35 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -426,6 +426,10 @@ static int bcmgenet_mii_register(struct bcmgenet_priv *priv)
 	int id, ret;
 
 	pres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!pres) {
+		dev_err(&pdev->dev, "Invalid resource\n");
+		return -EINVAL;
+	}
 	memset(&res, 0, sizeof(res));
 	memset(&ppd, 0, sizeof(ppd));
 
-- 
2.30.2

[PATCH AUTOSEL 5.4 32/74] net: mvpp2: check return value after calling platform_get_resource()

[Sasha Levin]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 0bb51a3a385790a4be20085494cf78f70dadf646 ]

It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 491bcfd36ac2..d5cf9afab103 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -5740,6 +5740,10 @@ static int mvpp2_probe(struct platform_device *pdev)
 			return PTR_ERR(priv->lms_base);
 	} else {
 		res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+		if (!res) {
+			dev_err(&pdev->dev, "Invalid resource\n");
+			return -EINVAL;
+		}
 		if (has_acpi_companion(&pdev->dev)) {
 			/* In case the MDIO memory region is declared in
 			 * the ACPI, it can already appear as 'in-use'
-- 
2.30.2

[PATCH AUTOSEL 5.4 33/74] net: micrel: check return value after calling platform_get_resource()

[Sasha Levin]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 20f1932e2282c58cb5ac59517585206cf5b385ae ]

It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/micrel/ks8842.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/micrel/ks8842.c b/drivers/net/ethernet/micrel/ks8842.c
index da329ca115cc..fb838e29d52d 100644
--- a/drivers/net/ethernet/micrel/ks8842.c
+++ b/drivers/net/ethernet/micrel/ks8842.c
@@ -1136,6 +1136,10 @@ static int ks8842_probe(struct platform_device *pdev)
 	unsigned i;
 
 	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!iomem) {
+		dev_err(&pdev->dev, "Invalid resource\n");
+		return -EINVAL;
+	}
 	if (!request_mem_region(iomem->start, resource_size(iomem), DRV_NAME))
 		goto err_mem_region;
 
-- 
2.30.2

[PATCH AUTOSEL 5.4 34/74] net: moxa: Use devm_platform_get_and_ioremap_resource()

[Sasha Levin]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 35cba15a504bf4f585bb9d78f47b22b28a1a06b2 ]

Use devm_platform_get_and_ioremap_resource() to simplify
code and avoid a null-ptr-deref by checking 'res' in it.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/moxa/moxart_ether.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/moxa/moxart_ether.c b/drivers/net/ethernet/moxa/moxart_ether.c
index f70bb81e1ed6..9f7eaae51335 100644
--- a/drivers/net/ethernet/moxa/moxart_ether.c
+++ b/drivers/net/ethernet/moxa/moxart_ether.c
@@ -480,14 +480,13 @@ static int moxart_mac_probe(struct platform_device *pdev)
 	priv->ndev = ndev;
 	priv->pdev = pdev;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	ndev->base_addr = res->start;
-	priv->base = devm_ioremap_resource(p_dev, res);
+	priv->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
 	if (IS_ERR(priv->base)) {
 		dev_err(p_dev, "devm_ioremap_resource failed\n");
 		ret = PTR_ERR(priv->base);
 		goto init_fail;
 	}
+	ndev->base_addr = res->start;
 
 	spin_lock_init(&priv->txlock);
 
-- 
2.30.2

[PATCH AUTOSEL 5.4 39/74] fjes: check return value after calling platform_get_resource()

[Sasha Levin]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit f18c11812c949553d2b2481ecaa274dd51bed1e7 ]

It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/fjes/fjes_main.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/fjes/fjes_main.c b/drivers/net/fjes/fjes_main.c
index 91a1059517f5..b89b4a3800a4 100644
--- a/drivers/net/fjes/fjes_main.c
+++ b/drivers/net/fjes/fjes_main.c
@@ -1262,6 +1262,10 @@ static int fjes_probe(struct platform_device *plat_dev)
 	adapter->interrupt_watch_enable = false;
 
 	res = platform_get_resource(plat_dev, IORESOURCE_MEM, 0);
+	if (!res) {
+		err = -EINVAL;
+		goto err_free_control_wq;
+	}
 	hw->hw_res.start = res->start;
 	hw->hw_res.size = resource_size(res);
 	hw->hw_res.irq = platform_get_irq(plat_dev, 0);
-- 
2.30.2

[PATCH AUTOSEL 5.4 41/74] r8169: avoid link-up interrupt issue on RTL8106e if user enables ASPM

[Sasha Levin]

From: Heiner Kallweit <hkallweit1@gmail.com>

[ Upstream commit 1ee8856de82faec9bc8bd0f2308a7f27e30ba207 ]

It has been reported that on RTL8106e the link-up interrupt may be
significantly delayed if the user enables ASPM L1. Per default ASPM
is disabled. The change leaves L1 enabled on the PCIe link (thus still
allowing to reach higher package power saving states), but the
NIC won't actively trigger it.

Reported-by: Koba Ko <koba.ko@canonical.com>
Tested-by: Koba Ko <koba.ko@canonical.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/realtek/r8169_main.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
index 661202e85412..5969f64169e5 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -5190,7 +5190,6 @@ static void rtl_hw_start_8106(struct rtl8169_private *tp)
 	RTL_W8(tp, DLLPR, RTL_R8(tp, DLLPR) & ~PFM_EN);
 
 	rtl_pcie_state_l2l3_disable(tp);
-	rtl_hw_aspm_clkreq_enable(tp, true);
 }
 
 DECLARE_RTL_COND(rtl_mac_ocp_e00e_cond)
-- 
2.30.2

[PATCH AUTOSEL 5.4 43/74] xfrm: Fix error reporting in xfrm_state_construct.

[Sasha Levin]

From: Steffen Klassert <steffen.klassert@secunet.com>

[ Upstream commit 6fd06963fa74197103cdbb4b494763127b3f2f34 ]

When memory allocation for XFRMA_ENCAP or XFRMA_COADDR fails,
the error will not be reported because the -ENOMEM assignment
to the err variable is overwritten before. Fix this by moving
these two in front of the function so that memory allocation
failures will be reported.

Reported-by: Tobias Brunner <tobias@strongswan.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/xfrm/xfrm_user.c | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index fbb7d9d06478..0cee2d3c6e45 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -580,6 +580,20 @@ static struct xfrm_state *xfrm_state_construct(struct net *net,
 
 	copy_from_user_state(x, p);
 
+	if (attrs[XFRMA_ENCAP]) {
+		x->encap = kmemdup(nla_data(attrs[XFRMA_ENCAP]),
+				   sizeof(*x->encap), GFP_KERNEL);
+		if (x->encap == NULL)
+			goto error;
+	}
+
+	if (attrs[XFRMA_COADDR]) {
+		x->coaddr = kmemdup(nla_data(attrs[XFRMA_COADDR]),
+				    sizeof(*x->coaddr), GFP_KERNEL);
+		if (x->coaddr == NULL)
+			goto error;
+	}
+
 	if (attrs[XFRMA_SA_EXTRA_FLAGS])
 		x->props.extra_flags = nla_get_u32(attrs[XFRMA_SA_EXTRA_FLAGS]);
 
@@ -600,23 +614,9 @@ static struct xfrm_state *xfrm_state_construct(struct net *net,
 				   attrs[XFRMA_ALG_COMP])))
 		goto error;
 
-	if (attrs[XFRMA_ENCAP]) {
-		x->encap = kmemdup(nla_data(attrs[XFRMA_ENCAP]),
-				   sizeof(*x->encap), GFP_KERNEL);
-		if (x->encap == NULL)
-			goto error;
-	}
-
 	if (attrs[XFRMA_TFCPAD])
 		x->tfcpad = nla_get_u32(attrs[XFRMA_TFCPAD]);
 
-	if (attrs[XFRMA_COADDR]) {
-		x->coaddr = kmemdup(nla_data(attrs[XFRMA_COADDR]),
-				    sizeof(*x->coaddr), GFP_KERNEL);
-		if (x->coaddr == NULL)
-			goto error;
-	}
-
 	xfrm_mark_get(attrs, &x->mark);
 
 	xfrm_smark_init(attrs, &x->props.smark);
-- 
2.30.2

[PATCH AUTOSEL 5.4 44/74] wlcore/wl12xx: Fix wl12xx get_mac error if device is in ELP

[Sasha Levin]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit 11ef6bc846dcdce838f0b00c5f6a562c57e5d43b ]

At least on wl12xx, reading the MAC after boot can fail with a warning
at drivers/net/wireless/ti/wlcore/sdio.c:78 wl12xx_sdio_raw_read.
The failed call comes from wl12xx_get_mac() that wlcore_nvs_cb() calls
after request_firmware_work_func().

After the error, no wireless interface is created. Reloading the wl12xx
module makes the interface work.

Turns out the wlan controller can be in a low-power ELP state after the
boot from the bootloader or kexec, and needs to be woken up first.

Let's wake the hardware and add a sleep after that similar to
wl12xx_pre_boot() is already doing.

Note that a similar issue could exist for wl18xx, but I have not seen it
so far. And a search for wl18xx_get_mac and wl12xx_sdio_raw_read did not
produce similar errors.

Cc: Carl Philipp Klemm <philipp@uvos.xyz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210603062814.19464-1-tony@atomide.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ti/wl12xx/main.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
index 9d7dbfe7fe0c..c6da0cfb4afb 100644
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -1503,6 +1503,13 @@ static int wl12xx_get_fuse_mac(struct wl1271 *wl)
 	u32 mac1, mac2;
 	int ret;
 
+	/* Device may be in ELP from the bootloader or kexec */
+	ret = wlcore_write32(wl, WL12XX_WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
+	if (ret < 0)
+		goto out;
+
+	usleep_range(500000, 700000);
+
 	ret = wlcore_set_partition(wl, &wl->ptable[PART_DRPW]);
 	if (ret < 0)
 		goto out;
-- 
2.30.2

[PATCH AUTOSEL 5.4 45/74] wl1251: Fix possible buffer overflow in wl1251_cmd_scan

[Sasha Levin]

From: Lee Gibson <leegib@gmail.com>

[ Upstream commit d10a87a3535cce2b890897914f5d0d83df669c63 ]

Function wl1251_cmd_scan calls memcpy without checking the length.
Harden by checking the length is within the maximum allowed size.

Signed-off-by: Lee Gibson <leegib@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210428115508.25624-1-leegib@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ti/wl1251/cmd.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ti/wl1251/cmd.c b/drivers/net/wireless/ti/wl1251/cmd.c
index 9547aea01b0f..ea0215246c5c 100644
--- a/drivers/net/wireless/ti/wl1251/cmd.c
+++ b/drivers/net/wireless/ti/wl1251/cmd.c
@@ -466,9 +466,12 @@ int wl1251_cmd_scan(struct wl1251 *wl, u8 *ssid, size_t ssid_len,
 		cmd->channels[i].channel = channels[i]->hw_value;
 	}
 
-	cmd->params.ssid_len = ssid_len;
-	if (ssid)
-		memcpy(cmd->params.ssid, ssid, ssid_len);
+	if (ssid) {
+		int len = clamp_val(ssid_len, 0, IEEE80211_MAX_SSID_LEN);
+
+		cmd->params.ssid_len = len;
+		memcpy(cmd->params.ssid, ssid, len);
+	}
 
 	ret = wl1251_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd));
 	if (ret < 0) {
-- 
2.30.2

[PATCH AUTOSEL 5.4 46/74] cw1200: add missing MODULE_DEVICE_TABLE

[Sasha Levin]

From: Zou Wei <zou_wei@huawei.com>

[ Upstream commit dd778f89225cd258e8f0fed2b7256124982c8bb5 ]

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1620788714-14300-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/st/cw1200/cw1200_sdio.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/st/cw1200/cw1200_sdio.c b/drivers/net/wireless/st/cw1200/cw1200_sdio.c
index 43e012073dbf..5ac06d672fc6 100644
--- a/drivers/net/wireless/st/cw1200/cw1200_sdio.c
+++ b/drivers/net/wireless/st/cw1200/cw1200_sdio.c
@@ -60,6 +60,7 @@ static const struct sdio_device_id cw1200_sdio_ids[] = {
 	{ SDIO_DEVICE(SDIO_VENDOR_ID_STE, SDIO_DEVICE_ID_STE_CW1200) },
 	{ /* end: all zeroes */			},
 };
+MODULE_DEVICE_TABLE(sdio, cw1200_sdio_ids);
 
 /* hwbus_ops implemetation */
 
-- 
2.30.2

[PATCH AUTOSEL 5.4 47/74] bpf: Fix up register-based shifts in interpreter to silence KUBSAN

[Sasha Levin]

From: Daniel Borkmann <daniel@iogearbox.net>

[ Upstream commit 28131e9d933339a92f78e7ab6429f4aaaa07061c ]

syzbot reported a shift-out-of-bounds that KUBSAN observed in the
interpreter:

  [...]
  UBSAN: shift-out-of-bounds in kernel/bpf/core.c:1420:2
  shift exponent 255 is too large for 64-bit type 'long long unsigned int'
  CPU: 1 PID: 11097 Comm: syz-executor.4 Not tainted 5.12.0-rc2-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  Call Trace:
   __dump_stack lib/dump_stack.c:79 [inline]
   dump_stack+0x141/0x1d7 lib/dump_stack.c:120
   ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
   __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:327
   ___bpf_prog_run.cold+0x19/0x56c kernel/bpf/core.c:1420
   __bpf_prog_run32+0x8f/0xd0 kernel/bpf/core.c:1735
   bpf_dispatcher_nop_func include/linux/bpf.h:644 [inline]
   bpf_prog_run_pin_on_cpu include/linux/filter.h:624 [inline]
   bpf_prog_run_clear_cb include/linux/filter.h:755 [inline]
   run_filter+0x1a1/0x470 net/packet/af_packet.c:2031
   packet_rcv+0x313/0x13e0 net/packet/af_packet.c:2104
   dev_queue_xmit_nit+0x7c2/0xa90 net/core/dev.c:2387
   xmit_one net/core/dev.c:3588 [inline]
   dev_hard_start_xmit+0xad/0x920 net/core/dev.c:3609
   __dev_queue_xmit+0x2121/0x2e00 net/core/dev.c:4182
   __bpf_tx_skb net/core/filter.c:2116 [inline]
   __bpf_redirect_no_mac net/core/filter.c:2141 [inline]
   __bpf_redirect+0x548/0xc80 net/core/filter.c:2164
   ____bpf_clone_redirect net/core/filter.c:2448 [inline]
   bpf_clone_redirect+0x2ae/0x420 net/core/filter.c:2420
   ___bpf_prog_run+0x34e1/0x77d0 kernel/bpf/core.c:1523
   __bpf_prog_run512+0x99/0xe0 kernel/bpf/core.c:1737
   bpf_dispatcher_nop_func include/linux/bpf.h:644 [inline]
   bpf_test_run+0x3ed/0xc50 net/bpf/test_run.c:50
   bpf_prog_test_run_skb+0xabc/0x1c50 net/bpf/test_run.c:582
   bpf_prog_test_run kernel/bpf/syscall.c:3127 [inline]
   __do_sys_bpf+0x1ea9/0x4f00 kernel/bpf/syscall.c:4406
   do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
   entry_SYSCALL_64_after_hwframe+0x44/0xae
  [...]

Generally speaking, KUBSAN reports from the kernel should be fixed.
However, in case of BPF, this particular report caused concerns since
the large shift is not wrong from BPF point of view, just undefined.
In the verifier, K-based shifts that are >= {64,32} (depending on the
bitwidth of the instruction) are already rejected. The register-based
cases were not given their content might not be known at verification
time. Ideas such as verifier instruction rewrite with an additional
AND instruction for the source register were brought up, but regularly
rejected due to the additional runtime overhead they incur.

As Edward Cree rightly put it:

  Shifts by more than insn bitness are legal in the BPF ISA; they are
  implementation-defined behaviour [of the underlying architecture],
  rather than UB, and have been made legal for performance reasons.
  Each of the JIT backends compiles the BPF shift operations to machine
  instructions which produce implementation-defined results in such a
  case; the resulting contents of the register may be arbitrary but
  program behaviour as a whole remains defined.

  Guard checks in the fast path (i.e. affecting JITted code) will thus
  not be accepted.

  The case of division by zero is not truly analogous here, as division
  instructions on many of the JIT-targeted architectures will raise a
  machine exception / fault on division by zero, whereas (to the best
  of my knowledge) none will do so on an out-of-bounds shift.

Given the KUBSAN report only affects the BPF interpreter, but not JITs,
one solution is to add the ANDs with 63 or 31 into ___bpf_prog_run().
That would make the shifts defined, and thus shuts up KUBSAN, and the
compiler would optimize out the AND on any CPU that interprets the shift
amounts modulo the width anyway (e.g., confirmed from disassembly that
on x86-64 and arm64 the generated interpreter code is the same before
and after this fix).

The BPF interpreter is slow path, and most likely compiled out anyway
as distros select BPF_JIT_ALWAYS_ON to avoid speculative execution of
BPF instructions by the interpreter. Given the main argument was to
avoid sacrificing performance, the fact that the AND is optimized away
from compiler for mainstream archs helps as well as a solution moving
forward. Also add a comment on LSH/RSH/ARSH translation for JIT authors
to provide guidance when they see the ___bpf_prog_run() interpreter
code and use it as a model for a new JIT backend.

Reported-by: syzbot+bed360704c521841c85d@syzkaller.appspotmail.com
Reported-by: Kurt Manucredo <fuzzybritches0@gmail.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Co-developed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: syzbot+bed360704c521841c85d@syzkaller.appspotmail.com
Cc: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/bpf/0000000000008f912605bd30d5d7@google.com
Link: https://lore.kernel.org/bpf/bac16d8d-c174-bdc4-91bd-bfa62b410190@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/core.c | 61 +++++++++++++++++++++++++++++++++--------------
 1 file changed, 43 insertions(+), 18 deletions(-)

diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c
index 56bc96f5ad20..323913ba13b3 100644
--- a/kernel/bpf/core.c
+++ b/kernel/bpf/core.c
@@ -1321,29 +1321,54 @@ static u64 ___bpf_prog_run(u64 *regs, const struct bpf_insn *insn, u64 *stack)
 select_insn:
 	goto *jumptable[insn->code];
 
-	/* ALU */
-#define ALU(OPCODE, OP)			\
-	ALU64_##OPCODE##_X:		\
-		DST = DST OP SRC;	\
-		CONT;			\
-	ALU_##OPCODE##_X:		\
-		DST = (u32) DST OP (u32) SRC;	\
-		CONT;			\
-	ALU64_##OPCODE##_K:		\
-		DST = DST OP IMM;		\
-		CONT;			\
-	ALU_##OPCODE##_K:		\
-		DST = (u32) DST OP (u32) IMM;	\
+	/* Explicitly mask the register-based shift amounts with 63 or 31
+	 * to avoid undefined behavior. Normally this won't affect the
+	 * generated code, for example, in case of native 64 bit archs such
+	 * as x86-64 or arm64, the compiler is optimizing the AND away for
+	 * the interpreter. In case of JITs, each of the JIT backends compiles
+	 * the BPF shift operations to machine instructions which produce
+	 * implementation-defined results in such a case; the resulting
+	 * contents of the register may be arbitrary, but program behaviour
+	 * as a whole remains defined. In other words, in case of JIT backends,
+	 * the AND must /not/ be added to the emitted LSH/RSH/ARSH translation.
+	 */
+	/* ALU (shifts) */
+#define SHT(OPCODE, OP)					\
+	ALU64_##OPCODE##_X:				\
+		DST = DST OP (SRC & 63);		\
+		CONT;					\
+	ALU_##OPCODE##_X:				\
+		DST = (u32) DST OP ((u32) SRC & 31);	\
+		CONT;					\
+	ALU64_##OPCODE##_K:				\
+		DST = DST OP IMM;			\
+		CONT;					\
+	ALU_##OPCODE##_K:				\
+		DST = (u32) DST OP (u32) IMM;		\
+		CONT;
+	/* ALU (rest) */
+#define ALU(OPCODE, OP)					\
+	ALU64_##OPCODE##_X:				\
+		DST = DST OP SRC;			\
+		CONT;					\
+	ALU_##OPCODE##_X:				\
+		DST = (u32) DST OP (u32) SRC;		\
+		CONT;					\
+	ALU64_##OPCODE##_K:				\
+		DST = DST OP IMM;			\
+		CONT;					\
+	ALU_##OPCODE##_K:				\
+		DST = (u32) DST OP (u32) IMM;		\
 		CONT;
-
 	ALU(ADD,  +)
 	ALU(SUB,  -)
 	ALU(AND,  &)
 	ALU(OR,   |)
-	ALU(LSH, <<)
-	ALU(RSH, >>)
 	ALU(XOR,  ^)
 	ALU(MUL,  *)
+	SHT(LSH, <<)
+	SHT(RSH, >>)
+#undef SHT
 #undef ALU
 	ALU_NEG:
 		DST = (u32) -DST;
@@ -1368,13 +1393,13 @@ static u64 ___bpf_prog_run(u64 *regs, const struct bpf_insn *insn, u64 *stack)
 		insn++;
 		CONT;
 	ALU_ARSH_X:
-		DST = (u64) (u32) (((s32) DST) >> SRC);
+		DST = (u64) (u32) (((s32) DST) >> (SRC & 31));
 		CONT;
 	ALU_ARSH_K:
 		DST = (u64) (u32) (((s32) DST) >> IMM);
 		CONT;
 	ALU64_ARSH_X:
-		(*(s64 *) &DST) >>= SRC;
+		(*(s64 *) &DST) >>= (SRC & 63);
 		CONT;
 	ALU64_ARSH_K:
 		(*(s64 *) &DST) >>= IMM;
-- 
2.30.2

[PATCH AUTOSEL 5.4 48/74] mt76: mt7615: fix fixed-rate tx status reporting

[Sasha Levin]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit ec8f1a90d006f7cedcf86ef19fd034a406a213d6 ]

Rely on the txs fixed-rate bit instead of info->control.rates

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
index 111e38ff954a..a6c530b9ceee 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
@@ -840,22 +840,20 @@ static bool mt7615_fill_txs(struct mt7615_dev *dev, struct mt7615_sta *sta,
 	int first_idx = 0, last_idx;
 	int i, idx, count;
 	bool fixed_rate, ack_timeout;
-	bool probe, ampdu, cck = false;
+	bool ampdu, cck = false;
 	bool rs_idx;
 	u32 rate_set_tsf;
 	u32 final_rate, final_rate_flags, final_nss, txs;
 
-	fixed_rate = info->status.rates[0].count;
-	probe = !!(info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE);
-
 	txs = le32_to_cpu(txs_data[1]);
-	ampdu = !fixed_rate && (txs & MT_TXS1_AMPDU);
+	ampdu = txs & MT_TXS1_AMPDU;
 
 	txs = le32_to_cpu(txs_data[3]);
 	count = FIELD_GET(MT_TXS3_TX_COUNT, txs);
 	last_idx = FIELD_GET(MT_TXS3_LAST_TX_RATE, txs);
 
 	txs = le32_to_cpu(txs_data[0]);
+	fixed_rate = txs & MT_TXS0_FIXED_RATE;
 	final_rate = FIELD_GET(MT_TXS0_TX_RATE, txs);
 	ack_timeout = txs & MT_TXS0_ACK_TIMEOUT;
 
@@ -877,7 +875,7 @@ static bool mt7615_fill_txs(struct mt7615_dev *dev, struct mt7615_sta *sta,
 
 	first_idx = max_t(int, 0, last_idx - (count + 1) / MT7615_RATE_RETRY);
 
-	if (fixed_rate && !probe) {
+	if (fixed_rate) {
 		info->status.rates[0].count = count;
 		i = 0;
 		goto out;
-- 
2.30.2

[PATCH AUTOSEL 5.4 50/74] net: sched: fix error return code in tcf_del_walker()

[Sasha Levin]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 55d96f72e8ddc0a294e0b9c94016edbb699537e1 ]

When nla_put_u32() fails, 'ret' could be 0, it should
return error code in tcf_del_walker().

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sched/act_api.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/sched/act_api.c b/net/sched/act_api.c
index 716cad677318..17e5cd9ebd89 100644
--- a/net/sched/act_api.c
+++ b/net/sched/act_api.c
@@ -316,7 +316,8 @@ static int tcf_del_walker(struct tcf_idrinfo *idrinfo, struct sk_buff *skb,
 	}
 	mutex_unlock(&idrinfo->lock);
 
-	if (nla_put_u32(skb, TCA_FCNT, n_i))
+	ret = nla_put_u32(skb, TCA_FCNT, n_i);
+	if (ret)
 		goto nla_put_failure;
 	nla_nest_end(skb, nest);
 
-- 
2.30.2

[PATCH AUTOSEL 5.4 52/74] rtl8xxxu: Fix device info for RTL8192EU devices

[Sasha Levin]

From: Pascal Terjan <pterjan@google.com>

[ Upstream commit c240b044edefa3c3af4014a4030e017dd95b59a1 ]

Based on 2001:3319 and 2357:0109 which I used to test the fix and
0bda:818b and 2357:0108 for which I found efuse dumps online.

== 2357:0109 ==
=== Before ===
Vendor: Realtek
Product: \x03802.11n NI
Serial:
=== After ===
Vendor: Realtek
Product: 802.11n NIC
Serial not available.

== 2001:3319 ==
=== Before ===
Vendor: Realtek
Product: Wireless N
Serial: no USB Adap
=== After ===
Vendor: Realtek
Product: Wireless N Nano USB Adapter
Serial not available.

Signed-off-by: Pascal Terjan <pterjan@google.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210424172959.1559890-1-pterjan@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/realtek/rtl8xxxu/rtl8xxxu.h  | 11 +---
 .../realtek/rtl8xxxu/rtl8xxxu_8192e.c         | 59 +++++++++++++++++--
 2 files changed, 56 insertions(+), 14 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
index 5e9ce03067de..6858f7de0915 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
@@ -853,15 +853,10 @@ struct rtl8192eu_efuse {
 	u8 usb_optional_function;
 	u8 res9[2];
 	u8 mac_addr[ETH_ALEN];		/* 0xd7 */
-	u8 res10[2];
-	u8 vendor_name[7];
-	u8 res11[2];
-	u8 device_name[0x0b];		/* 0xe8 */
-	u8 res12[2];
-	u8 serial[0x0b];		/* 0xf5 */
-	u8 res13[0x30];
+	u8 device_info[80];
+	u8 res11[3];
 	u8 unknown[0x0d];		/* 0x130 */
-	u8 res14[0xc3];
+	u8 res12[0xc3];
 };
 
 struct rtl8xxxu_reg8val {
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
index c747f6a1922d..02ca80501c3a 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
@@ -554,9 +554,43 @@ rtl8192e_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40)
 	}
 }
 
+static void rtl8192eu_log_next_device_info(struct rtl8xxxu_priv *priv,
+					   char *record_name,
+					   char *device_info,
+					   unsigned int *record_offset)
+{
+	char *record = device_info + *record_offset;
+
+	/* A record is [ total length | 0x03 | value ] */
+	unsigned char l = record[0];
+
+	/*
+	 * The whole device info section seems to be 80 characters, make sure
+	 * we don't read further.
+	 */
+	if (*record_offset + l > 80) {
+		dev_warn(&priv->udev->dev,
+			 "invalid record length %d while parsing \"%s\" at offset %u.\n",
+			 l, record_name, *record_offset);
+		return;
+	}
+
+	if (l >= 2) {
+		char value[80];
+
+		memcpy(value, &record[2], l - 2);
+		value[l - 2] = '\0';
+		dev_info(&priv->udev->dev, "%s: %s\n", record_name, value);
+		*record_offset = *record_offset + l;
+	} else {
+		dev_info(&priv->udev->dev, "%s not available.\n", record_name);
+	}
+}
+
 static int rtl8192eu_parse_efuse(struct rtl8xxxu_priv *priv)
 {
 	struct rtl8192eu_efuse *efuse = &priv->efuse_wifi.efuse8192eu;
+	unsigned int record_offset;
 	int i;
 
 	if (efuse->rtl_id != cpu_to_le16(0x8129))
@@ -604,12 +638,25 @@ static int rtl8192eu_parse_efuse(struct rtl8xxxu_priv *priv)
 	priv->has_xtalk = 1;
 	priv->xtalk = priv->efuse_wifi.efuse8192eu.xtal_k & 0x3f;
 
-	dev_info(&priv->udev->dev, "Vendor: %.7s\n", efuse->vendor_name);
-	dev_info(&priv->udev->dev, "Product: %.11s\n", efuse->device_name);
-	if (memchr_inv(efuse->serial, 0xff, 11))
-		dev_info(&priv->udev->dev, "Serial: %.11s\n", efuse->serial);
-	else
-		dev_info(&priv->udev->dev, "Serial not available.\n");
+	/*
+	 * device_info section seems to be laid out as records
+	 * [ total length | 0x03 | value ] so:
+	 * - vendor length + 2
+	 * - 0x03
+	 * - vendor string (not null terminated)
+	 * - product length + 2
+	 * - 0x03
+	 * - product string (not null terminated)
+	 * Then there is one or 2 0x00 on all the 4 devices I own or found
+	 * dumped online.
+	 * As previous version of the code handled an optional serial
+	 * string, I now assume there may be a third record if the
+	 * length is not 0.
+	 */
+	record_offset = 0;
+	rtl8192eu_log_next_device_info(priv, "Vendor", efuse->device_info, &record_offset);
+	rtl8192eu_log_next_device_info(priv, "Product", efuse->device_info, &record_offset);
+	rtl8192eu_log_next_device_info(priv, "Serial", efuse->device_info, &record_offset);
 
 	if (rtl8xxxu_debug & RTL8XXXU_DEBUG_EFUSE) {
 		unsigned char *raw = priv->efuse_wifi.raw;
-- 
2.30.2

[PATCH AUTOSEL 5.4 54/74] atm: nicstar: use 'dma_free_coherent' instead of 'kfree'

[Sasha Levin]

From: Zheyu Ma <zheyuma97@gmail.com>

[ Upstream commit 6a1e5a4af17e440dd82a58a2c5f40ff17a82b722 ]

When 'nicstar_init_one' fails, 'ns_init_card_error' will be executed for
error handling, but the correct memory free function should be used,
otherwise it will cause an error. Since 'card->rsq.org' and
'card->tsq.org' are allocated using 'dma_alloc_coherent' function, they
should be freed using 'dma_free_coherent'.

Fix this by using 'dma_free_coherent' instead of 'kfree'

This log reveals it:

[    3.440294] kernel BUG at mm/slub.c:4206!
[    3.441059] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[    3.441430] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.12.4-g70e7f0549188-dirty #141
[    3.441986] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[    3.442780] RIP: 0010:kfree+0x26a/0x300
[    3.443065] Code: e8 3a c3 b9 ff e9 d6 fd ff ff 49 8b 45 00 31 db a9 00 00 01 00 75 4d 49 8b 45 00 a9 00 00 01 00 75 0a 49 8b 45 08 a8 01 75 02 <0f> 0b 89 d9 b8 00 10 00 00 be 06 00 00 00 48 d3 e0 f7 d8 48 63 d0
[    3.443396] RSP: 0000:ffffc90000017b70 EFLAGS: 00010246
[    3.443396] RAX: dead000000000100 RBX: 0000000000000000 RCX: 0000000000000000
[    3.443396] RDX: 0000000000000000 RSI: ffffffff85d3df94 RDI: ffffffff85df38e6
[    3.443396] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000001
[    3.443396] R10: 0000000000000000 R11: 0000000000000001 R12: ffff888107dc0000
[    3.443396] R13: ffffea00001f0100 R14: ffff888101a8bf00 R15: ffff888107dc0160
[    3.443396] FS:  0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000
[    3.443396] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    3.443396] CR2: 0000000000000000 CR3: 000000000642e000 CR4: 00000000000006e0
[    3.443396] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    3.443396] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    3.443396] Call Trace:
[    3.443396]  ns_init_card_error+0x12c/0x220
[    3.443396]  nicstar_init_one+0x10d2/0x1130
[    3.443396]  local_pci_probe+0x4a/0xb0
[    3.443396]  pci_device_probe+0x126/0x1d0
[    3.443396]  ? pci_device_remove+0x100/0x100
[    3.443396]  really_probe+0x27e/0x650
[    3.443396]  driver_probe_device+0x84/0x1d0
[    3.443396]  ? mutex_lock_nested+0x16/0x20
[    3.443396]  device_driver_attach+0x63/0x70
[    3.443396]  __driver_attach+0x117/0x1a0
[    3.443396]  ? device_driver_attach+0x70/0x70
[    3.443396]  bus_for_each_dev+0xb6/0x110
[    3.443396]  ? rdinit_setup+0x40/0x40
[    3.443396]  driver_attach+0x22/0x30
[    3.443396]  bus_add_driver+0x1e6/0x2a0
[    3.443396]  driver_register+0xa4/0x180
[    3.443396]  __pci_register_driver+0x77/0x80
[    3.443396]  ? uPD98402_module_init+0xd/0xd
[    3.443396]  nicstar_init+0x1f/0x75
[    3.443396]  do_one_initcall+0x7a/0x3d0
[    3.443396]  ? rdinit_setup+0x40/0x40
[    3.443396]  ? rcu_read_lock_sched_held+0x4a/0x70
[    3.443396]  kernel_init_freeable+0x2a7/0x2f9
[    3.443396]  ? rest_init+0x2c0/0x2c0
[    3.443396]  kernel_init+0x13/0x180
[    3.443396]  ? rest_init+0x2c0/0x2c0
[    3.443396]  ? rest_init+0x2c0/0x2c0
[    3.443396]  ret_from_fork+0x1f/0x30
[    3.443396] Modules linked in:
[    3.443396] Dumping ftrace buffer:
[    3.443396]    (ftrace buffer empty)
[    3.458593] ---[ end trace 3c6f8f0d8ef59bcd ]---
[    3.458922] RIP: 0010:kfree+0x26a/0x300
[    3.459198] Code: e8 3a c3 b9 ff e9 d6 fd ff ff 49 8b 45 00 31 db a9 00 00 01 00 75 4d 49 8b 45 00 a9 00 00 01 00 75 0a 49 8b 45 08 a8 01 75 02 <0f> 0b 89 d9 b8 00 10 00 00 be 06 00 00 00 48 d3 e0 f7 d8 48 63 d0
[    3.460499] RSP: 0000:ffffc90000017b70 EFLAGS: 00010246
[    3.460870] RAX: dead000000000100 RBX: 0000000000000000 RCX: 0000000000000000
[    3.461371] RDX: 0000000000000000 RSI: ffffffff85d3df94 RDI: ffffffff85df38e6
[    3.461873] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000001
[    3.462372] R10: 0000000000000000 R11: 0000000000000001 R12: ffff888107dc0000
[    3.462871] R13: ffffea00001f0100 R14: ffff888101a8bf00 R15: ffff888107dc0160
[    3.463368] FS:  0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000
[    3.463949] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    3.464356] CR2: 0000000000000000 CR3: 000000000642e000 CR4: 00000000000006e0
[    3.464856] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    3.465356] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    3.465860] Kernel panic - not syncing: Fatal exception
[    3.466370] Dumping ftrace buffer:
[    3.466616]    (ftrace buffer empty)
[    3.466871] Kernel Offset: disabled
[    3.467122] Rebooting in 1 seconds..

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/atm/nicstar.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/atm/nicstar.c b/drivers/atm/nicstar.c
index 5ec7b6a60145..f1e8aa26d284 100644
--- a/drivers/atm/nicstar.c
+++ b/drivers/atm/nicstar.c
@@ -837,10 +837,12 @@ static void ns_init_card_error(ns_dev *card, int error)
 			dev_kfree_skb_any(hb);
 	}
 	if (error >= 12) {
-		kfree(card->rsq.org);
+		dma_free_coherent(&card->pcidev->dev, NS_RSQSIZE + NS_RSQ_ALIGNMENT,
+				card->rsq.org, card->rsq.dma);
 	}
 	if (error >= 11) {
-		kfree(card->tsq.org);
+		dma_free_coherent(&card->pcidev->dev, NS_TSQSIZE + NS_TSQ_ALIGNMENT,
+				card->tsq.org, card->tsq.dma);
 	}
 	if (error >= 10) {
 		free_irq(card->pcidev->irq, card);
-- 
2.30.2

[PATCH AUTOSEL 5.4 55/74] atm: nicstar: register the interrupt handler in the right place

[Sasha Levin]

From: Zheyu Ma <zheyuma97@gmail.com>

[ Upstream commit 70b639dc41ad499384e41e106fce72e36805c9f2 ]

Because the error handling is sequential, the application of resources
should be carried out in the order of error handling, so the operation
of registering the interrupt handler should be put in front, so as not
to free the unregistered interrupt handler during error handling.

This log reveals it:

[    3.438724] Trying to free already-free IRQ 23
[    3.439060] WARNING: CPU: 5 PID: 1 at kernel/irq/manage.c:1825 free_irq+0xfb/0x480
[    3.440039] Modules linked in:
[    3.440257] CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.12.4-g70e7f0549188-dirty #142
[    3.440793] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[    3.441561] RIP: 0010:free_irq+0xfb/0x480
[    3.441845] Code: 6e 08 74 6f 4d 89 f4 e8 c3 78 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 b4 78 09 00 8b 75 c8 48 c7 c7 a0 ac d5 85 e8 95 d7 f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 87 c5 90 03 48 8b 43 40 4c 8b a0 80
[    3.443121] RSP: 0000:ffffc90000017b50 EFLAGS: 00010086
[    3.443483] RAX: 0000000000000000 RBX: ffff888107c6f000 RCX: 0000000000000000
[    3.443972] RDX: 0000000000000000 RSI: ffffffff8123f301 RDI: 00000000ffffffff
[    3.444462] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000003
[    3.444950] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
[    3.444994] R13: ffff888107dc0000 R14: ffff888104f6bf00 R15: ffff888107c6f0a8
[    3.444994] FS:  0000000000000000(0000) GS:ffff88817bd40000(0000) knlGS:0000000000000000
[    3.444994] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    3.444994] CR2: 0000000000000000 CR3: 000000000642e000 CR4: 00000000000006e0
[    3.444994] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    3.444994] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    3.444994] Call Trace:
[    3.444994]  ns_init_card_error+0x18e/0x250
[    3.444994]  nicstar_init_one+0x10d2/0x1130
[    3.444994]  local_pci_probe+0x4a/0xb0
[    3.444994]  pci_device_probe+0x126/0x1d0
[    3.444994]  ? pci_device_remove+0x100/0x100
[    3.444994]  really_probe+0x27e/0x650
[    3.444994]  driver_probe_device+0x84/0x1d0
[    3.444994]  ? mutex_lock_nested+0x16/0x20
[    3.444994]  device_driver_attach+0x63/0x70
[    3.444994]  __driver_attach+0x117/0x1a0
[    3.444994]  ? device_driver_attach+0x70/0x70
[    3.444994]  bus_for_each_dev+0xb6/0x110
[    3.444994]  ? rdinit_setup+0x40/0x40
[    3.444994]  driver_attach+0x22/0x30
[    3.444994]  bus_add_driver+0x1e6/0x2a0
[    3.444994]  driver_register+0xa4/0x180
[    3.444994]  __pci_register_driver+0x77/0x80
[    3.444994]  ? uPD98402_module_init+0xd/0xd
[    3.444994]  nicstar_init+0x1f/0x75
[    3.444994]  do_one_initcall+0x7a/0x3d0
[    3.444994]  ? rdinit_setup+0x40/0x40
[    3.444994]  ? rcu_read_lock_sched_held+0x4a/0x70
[    3.444994]  kernel_init_freeable+0x2a7/0x2f9
[    3.444994]  ? rest_init+0x2c0/0x2c0
[    3.444994]  kernel_init+0x13/0x180
[    3.444994]  ? rest_init+0x2c0/0x2c0
[    3.444994]  ? rest_init+0x2c0/0x2c0
[    3.444994]  ret_from_fork+0x1f/0x30
[    3.444994] Kernel panic - not syncing: panic_on_warn set ...
[    3.444994] CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.12.4-g70e7f0549188-dirty #142
[    3.444994] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[    3.444994] Call Trace:
[    3.444994]  dump_stack+0xba/0xf5
[    3.444994]  ? free_irq+0xfb/0x480
[    3.444994]  panic+0x155/0x3ed
[    3.444994]  ? __warn+0xed/0x150
[    3.444994]  ? free_irq+0xfb/0x480
[    3.444994]  __warn+0x103/0x150
[    3.444994]  ? free_irq+0xfb/0x480
[    3.444994]  report_bug+0x119/0x1c0
[    3.444994]  handle_bug+0x3b/0x80
[    3.444994]  exc_invalid_op+0x18/0x70
[    3.444994]  asm_exc_invalid_op+0x12/0x20
[    3.444994] RIP: 0010:free_irq+0xfb/0x480
[    3.444994] Code: 6e 08 74 6f 4d 89 f4 e8 c3 78 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 b4 78 09 00 8b 75 c8 48 c7 c7 a0 ac d5 85 e8 95 d7 f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 87 c5 90 03 48 8b 43 40 4c 8b a0 80
[    3.444994] RSP: 0000:ffffc90000017b50 EFLAGS: 00010086
[    3.444994] RAX: 0000000000000000 RBX: ffff888107c6f000 RCX: 0000000000000000
[    3.444994] RDX: 0000000000000000 RSI: ffffffff8123f301 RDI: 00000000ffffffff
[    3.444994] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000003
[    3.444994] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
[    3.444994] R13: ffff888107dc0000 R14: ffff888104f6bf00 R15: ffff888107c6f0a8
[    3.444994]  ? vprintk_func+0x71/0x110
[    3.444994]  ns_init_card_error+0x18e/0x250
[    3.444994]  nicstar_init_one+0x10d2/0x1130
[    3.444994]  local_pci_probe+0x4a/0xb0
[    3.444994]  pci_device_probe+0x126/0x1d0
[    3.444994]  ? pci_device_remove+0x100/0x100
[    3.444994]  really_probe+0x27e/0x650
[    3.444994]  driver_probe_device+0x84/0x1d0
[    3.444994]  ? mutex_lock_nested+0x16/0x20
[    3.444994]  device_driver_attach+0x63/0x70
[    3.444994]  __driver_attach+0x117/0x1a0
[    3.444994]  ? device_driver_attach+0x70/0x70
[    3.444994]  bus_for_each_dev+0xb6/0x110
[    3.444994]  ? rdinit_setup+0x40/0x40
[    3.444994]  driver_attach+0x22/0x30
[    3.444994]  bus_add_driver+0x1e6/0x2a0
[    3.444994]  driver_register+0xa4/0x180
[    3.444994]  __pci_register_driver+0x77/0x80
[    3.444994]  ? uPD98402_module_init+0xd/0xd
[    3.444994]  nicstar_init+0x1f/0x75
[    3.444994]  do_one_initcall+0x7a/0x3d0
[    3.444994]  ? rdinit_setup+0x40/0x40
[    3.444994]  ? rcu_read_lock_sched_held+0x4a/0x70
[    3.444994]  kernel_init_freeable+0x2a7/0x2f9
[    3.444994]  ? rest_init+0x2c0/0x2c0
[    3.444994]  kernel_init+0x13/0x180
[    3.444994]  ? rest_init+0x2c0/0x2c0
[    3.444994]  ? rest_init+0x2c0/0x2c0
[    3.444994]  ret_from_fork+0x1f/0x30
[    3.444994] Dumping ftrace buffer:
[    3.444994]    (ftrace buffer empty)
[    3.444994] Kernel Offset: disabled
[    3.444994] Rebooting in 1 seconds..

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/atm/nicstar.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/atm/nicstar.c b/drivers/atm/nicstar.c
index f1e8aa26d284..f9d29de537b6 100644
--- a/drivers/atm/nicstar.c
+++ b/drivers/atm/nicstar.c
@@ -525,6 +525,15 @@ static int ns_init_card(int i, struct pci_dev *pcidev)
 	/* Set the VPI/VCI MSb mask to zero so we can receive OAM cells */
 	writel(0x00000000, card->membase + VPM);
 
+	card->intcnt = 0;
+	if (request_irq
+	    (pcidev->irq, &ns_irq_handler, IRQF_SHARED, "nicstar", card) != 0) {
+		pr_err("nicstar%d: can't allocate IRQ %d.\n", i, pcidev->irq);
+		error = 9;
+		ns_init_card_error(card, error);
+		return error;
+	}
+
 	/* Initialize TSQ */
 	card->tsq.org = dma_alloc_coherent(&card->pcidev->dev,
 					   NS_TSQSIZE + NS_TSQ_ALIGNMENT,
@@ -751,15 +760,6 @@ static int ns_init_card(int i, struct pci_dev *pcidev)
 
 	card->efbie = 1;
 
-	card->intcnt = 0;
-	if (request_irq
-	    (pcidev->irq, &ns_irq_handler, IRQF_SHARED, "nicstar", card) != 0) {
-		printk("nicstar%d: can't allocate IRQ %d.\n", i, pcidev->irq);
-		error = 9;
-		ns_init_card_error(card, error);
-		return error;
-	}
-
 	/* Register device */
 	card->atmdev = atm_dev_register("nicstar", &card->pcidev->dev, &atm_ops,
 					-1, NULL);
-- 
2.30.2

[PATCH AUTOSEL 5.4 56/74] vsock: notify server to shutdown when client has pending signal

[Sasha Levin]

From: "Longpeng(Mike)" <longpeng2@huawei.com>

[ Upstream commit c7ff9cff70601ea19245d997bb977344663434c7 ]

The client's sk_state will be set to TCP_ESTABLISHED if the server
replay the client's connect request.

However, if the client has pending signal, its sk_state will be set
to TCP_CLOSE without notify the server, so the server will hold the
corrupt connection.

            client                        server

1. sk_state=TCP_SYN_SENT         |
2. call ->connect()              |
3. wait reply                    |
                                 | 4. sk_state=TCP_ESTABLISHED
                                 | 5. insert to connected list
                                 | 6. reply to the client
7. sk_state=TCP_ESTABLISHED      |
8. insert to connected list      |
9. *signal pending* <--------------------- the user kill client
10. sk_state=TCP_CLOSE           |
client is exiting...             |
11. call ->release()             |
     virtio_transport_close
      if (!(sk->sk_state == TCP_ESTABLISHED ||
	      sk->sk_state == TCP_CLOSING))
		return true; *return at here, the server cannot notice the connection is corrupt*

So the client should notify the peer in this case.

Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jorgen Hansen <jhansen@vmware.com>
Cc: Norbert Slusarek <nslusarek@gmx.net>
Cc: Andra Paraschiv <andraprs@amazon.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: David Brazdil <dbrazdil@google.com>
Cc: Alexander Popov <alex.popov@linux.com>
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lkml.org/lkml/2021/5/17/418
Signed-off-by: lixianming <lixianming5@huawei.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/vmw_vsock/af_vsock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/vmw_vsock/af_vsock.c b/net/vmw_vsock/af_vsock.c
index c82e7b52ab1f..d4104144bab1 100644
--- a/net/vmw_vsock/af_vsock.c
+++ b/net/vmw_vsock/af_vsock.c
@@ -1217,7 +1217,7 @@ static int vsock_stream_connect(struct socket *sock, struct sockaddr *addr,
 
 		if (signal_pending(current)) {
 			err = sock_intr_errno(timeout);
-			sk->sk_state = TCP_CLOSE;
+			sk->sk_state = sk->sk_state == TCP_ESTABLISHED ? TCP_CLOSING : TCP_CLOSE;
 			sock->state = SS_UNCONNECTED;
 			vsock_transport_cancel_pkt(vsk);
 			goto out_wait;
-- 
2.30.2

[PATCH AUTOSEL 5.4 58/74] iwlwifi: mvm: don't change band on bound PHY contexts

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 8835a64f74c46baebfc946cd5a2c861b866ebcee ]

When we have a P2P Device active, we attempt to only change the
PHY context it uses when we get a new remain-on-channel, if the
P2P Device is the only user of the PHY context.

This is fine if we're switching within a band, but if we're
switching bands then the switch implies a removal and re-add
of the PHY context, which isn't permitted by the firmware while
it's bound to an interface.

Fix the code to skip the unbind/release/... cycle only if the
band doesn't change (or we have old devices that can switch the
band on the fly as well.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210612142637.e9ac313f70f3.I713b9d109957df7e7d9ed0861d5377ce3f8fccd3@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/intel/iwlwifi/mvm/mac80211.c | 24 ++++++++++++++-----
 1 file changed, 18 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
index fc6430edd110..09b1a6beee77 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
@@ -3725,6 +3725,7 @@ static int iwl_mvm_roc(struct ieee80211_hw *hw,
 	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
 	struct cfg80211_chan_def chandef;
 	struct iwl_mvm_phy_ctxt *phy_ctxt;
+	bool band_change_removal;
 	int ret, i;
 
 	IWL_DEBUG_MAC80211(mvm, "enter (%d, %d, %d)\n", channel->hw_value,
@@ -3794,19 +3795,30 @@ static int iwl_mvm_roc(struct ieee80211_hw *hw,
 	cfg80211_chandef_create(&chandef, channel, NL80211_CHAN_NO_HT);
 
 	/*
-	 * Change the PHY context configuration as it is currently referenced
-	 * only by the P2P Device MAC
+	 * Check if the remain-on-channel is on a different band and that
+	 * requires context removal, see iwl_mvm_phy_ctxt_changed(). If
+	 * so, we'll need to release and then re-configure here, since we
+	 * must not remove a PHY context that's part of a binding.
 	 */
-	if (mvmvif->phy_ctxt->ref == 1) {
+	band_change_removal =
+		fw_has_capa(&mvm->fw->ucode_capa,
+			    IWL_UCODE_TLV_CAPA_BINDING_CDB_SUPPORT) &&
+		mvmvif->phy_ctxt->channel->band != chandef.chan->band;
+
+	if (mvmvif->phy_ctxt->ref == 1 && !band_change_removal) {
+		/*
+		 * Change the PHY context configuration as it is currently
+		 * referenced only by the P2P Device MAC (and we can modify it)
+		 */
 		ret = iwl_mvm_phy_ctxt_changed(mvm, mvmvif->phy_ctxt,
 					       &chandef, 1, 1);
 		if (ret)
 			goto out_unlock;
 	} else {
 		/*
-		 * The PHY context is shared with other MACs. Need to remove the
-		 * P2P Device from the binding, allocate an new PHY context and
-		 * create a new binding
+		 * The PHY context is shared with other MACs (or we're trying to
+		 * switch bands), so remove the P2P Device from the binding,
+		 * allocate an new PHY context and create a new binding.
 		 */
 		phy_ctxt = iwl_mvm_get_free_phy_ctxt(mvm);
 		if (!phy_ctxt) {
-- 
2.30.2

[PATCH AUTOSEL 5.4 59/74] iwlwifi: pcie: free IML DMA memory allocation

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 310f60f53a86eba680d9bc20a371e13b06a5f903 ]

In the case of gen3 devices with image loader (IML) support,
we were leaking the IML DMA allocation and never freeing it.
Fix that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618105614.07e117dbedb7.I7bb9ebbe0617656986c2a598ea5e827b533bd3b9@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c  | 15 ++++++++++-----
 .../net/wireless/intel/iwlwifi/pcie/internal.h    |  3 +++
 2 files changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c b/drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c
index eab159205e48..f6b43cd87d5d 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c
@@ -63,7 +63,6 @@ int iwl_pcie_ctxt_info_gen3_init(struct iwl_trans *trans,
 	struct iwl_prph_scratch *prph_scratch;
 	struct iwl_prph_scratch_ctrl_cfg *prph_sc_ctrl;
 	struct iwl_prph_info *prph_info;
-	void *iml_img;
 	u32 control_flags = 0;
 	int ret;
 	int cmdq_size = max_t(u32, IWL_CMD_QUEUE_SIZE,
@@ -162,14 +161,15 @@ int iwl_pcie_ctxt_info_gen3_init(struct iwl_trans *trans,
 	trans_pcie->prph_scratch = prph_scratch;
 
 	/* Allocate IML */
-	iml_img = dma_alloc_coherent(trans->dev, trans->iml_len,
-				     &trans_pcie->iml_dma_addr, GFP_KERNEL);
-	if (!iml_img) {
+	trans_pcie->iml = dma_alloc_coherent(trans->dev, trans->iml_len,
+					     &trans_pcie->iml_dma_addr,
+					     GFP_KERNEL);
+	if (!trans_pcie->iml) {
 		ret = -ENOMEM;
 		goto err_free_ctxt_info;
 	}
 
-	memcpy(iml_img, trans->iml, trans->iml_len);
+	memcpy(trans_pcie->iml, trans->iml, trans->iml_len);
 
 	iwl_enable_fw_load_int_ctx_info(trans);
 
@@ -242,6 +242,11 @@ void iwl_pcie_ctxt_info_gen3_free(struct iwl_trans *trans)
 	trans_pcie->ctxt_info_dma_addr = 0;
 	trans_pcie->ctxt_info_gen3 = NULL;
 
+	dma_free_coherent(trans->dev, trans->iml_len, trans_pcie->iml,
+			  trans_pcie->iml_dma_addr);
+	trans_pcie->iml_dma_addr = 0;
+	trans_pcie->iml = NULL;
+
 	iwl_pcie_ctxt_info_free_fw_img(trans);
 
 	dma_free_coherent(trans->dev, sizeof(*trans_pcie->prph_scratch),
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/internal.h b/drivers/net/wireless/intel/iwlwifi/pcie/internal.h
index 9b5b96e34456..553164f06a6b 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/internal.h
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/internal.h
@@ -475,6 +475,8 @@ struct cont_rec {
  *	Context information addresses will be taken from here.
  *	This is driver's local copy for keeping track of size and
  *	count for allocating and freeing the memory.
+ * @iml: image loader image virtual address
+ * @iml_dma_addr: image loader image DMA address
  * @trans: pointer to the generic transport area
  * @scd_base_addr: scheduler sram base address in SRAM
  * @scd_bc_tbls: pointer to the byte count table of the scheduler
@@ -522,6 +524,7 @@ struct iwl_trans_pcie {
 	};
 	struct iwl_prph_info *prph_info;
 	struct iwl_prph_scratch *prph_scratch;
+	void *iml;
 	dma_addr_t ctxt_info_dma_addr;
 	dma_addr_t prph_info_dma_addr;
 	dma_addr_t prph_scratch_dma_addr;
-- 
2.30.2

[PATCH AUTOSEL 5.4 60/74] iwlwifi: pcie: fix context info freeing

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 26d18c75a7496c4c52b0b6789e713dc76ebfbc87 ]

After firmware alive, iwl_trans_pcie_gen2_fw_alive() is called
to free the context info. However, on gen3 that will then free
the context info with the wrong size.

Since we free this allocation later, let it stick around until
the device is stopped for now, freeing some of it earlier is a
separate change.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618105614.afb63fb8cbc1.If4968db8e09f4ce2a1d27a6d750bca3d132d7d70@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c
index df8455f14e4d..ee45e475405a 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c
@@ -269,7 +269,8 @@ void iwl_trans_pcie_gen2_fw_alive(struct iwl_trans *trans, u32 scd_addr)
 	/* now that we got alive we can free the fw image & the context info.
 	 * paging memory cannot be freed included since FW will still use it
 	 */
-	iwl_pcie_ctxt_info_free(trans);
+	if (trans->trans_cfg->device_family < IWL_DEVICE_FAMILY_AX210)
+		iwl_pcie_ctxt_info_free(trans);
 
 	/*
 	 * Re-enable all the interrupts, including the RF-Kill one, now that
-- 
2.30.2

[PATCH AUTOSEL 5.4 61/74] sfc: avoid double pci_remove of VFs

[Sasha Levin]

From: Íñigo Huguet <ihuguet@redhat.com>

[ Upstream commit 45423cff1db66cf0993e8a9bd0ac93e740149e49 ]

If pci_remove was called for a PF with VFs, the removal of the VFs was
called twice from efx_ef10_sriov_fini: one directly with pci_driver->remove
and another implicit by calling pci_disable_sriov, which also perform
the VFs remove. This was leading to crashing the kernel on the second
attempt.

Given that pci_disable_sriov already calls to pci remove function, get
rid of the direct call to pci_driver->remove from the driver.

2 different ways to trigger the bug:
- Create one or more VFs, then attach the PF to a virtual machine (at
  least with qemu/KVM)
- Create one or more VFs, then remove the PF with:
  echo 1 > /sys/bus/pci/devices/PF_PCI_ID/remove

Removing sfc module does not trigger the error, at least for me, because
it removes the VF first, and then the PF.

Example of a log with the error:
    list_del corruption, ffff967fd20a8ad0->next is LIST_POISON1 (dead000000000100)
    ------------[ cut here ]------------
    kernel BUG at lib/list_debug.c:47!
    [...trimmed...]
    RIP: 0010:__list_del_entry_valid.cold.1+0x12/0x4c
    [...trimmed...]
    Call Trace:
    efx_dissociate+0x1f/0x140 [sfc]
    efx_pci_remove+0x27/0x150 [sfc]
    pci_device_remove+0x3b/0xc0
    device_release_driver_internal+0x103/0x1f0
    pci_stop_bus_device+0x69/0x90
    pci_stop_and_remove_bus_device+0xe/0x20
    pci_iov_remove_virtfn+0xba/0x120
    sriov_disable+0x2f/0xe0
    efx_ef10_pci_sriov_disable+0x52/0x80 [sfc]
    ? pcie_aer_is_native+0x12/0x40
    efx_ef10_sriov_fini+0x72/0x110 [sfc]
    efx_pci_remove+0x62/0x150 [sfc]
    pci_device_remove+0x3b/0xc0
    device_release_driver_internal+0x103/0x1f0
    unbind_store+0xf6/0x130
    kernfs_fop_write+0x116/0x190
    vfs_write+0xa5/0x1a0
    ksys_write+0x4f/0xb0
    do_syscall_64+0x5b/0x1a0
    entry_SYSCALL_64_after_hwframe+0x65/0xca

Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/sfc/ef10_sriov.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/sfc/ef10_sriov.c b/drivers/net/ethernet/sfc/ef10_sriov.c
index 52bd43f45761..695e3508b4d8 100644
--- a/drivers/net/ethernet/sfc/ef10_sriov.c
+++ b/drivers/net/ethernet/sfc/ef10_sriov.c
@@ -440,7 +440,6 @@ int efx_ef10_sriov_init(struct efx_nic *efx)
 void efx_ef10_sriov_fini(struct efx_nic *efx)
 {
 	struct efx_ef10_nic_data *nic_data = efx->nic_data;
-	unsigned int i;
 	int rc;
 
 	if (!nic_data->vf) {
@@ -450,14 +449,7 @@ void efx_ef10_sriov_fini(struct efx_nic *efx)
 		return;
 	}
 
-	/* Remove any VFs in the host */
-	for (i = 0; i < efx->vf_count; ++i) {
-		struct efx_nic *vf_efx = nic_data->vf[i].efx;
-
-		if (vf_efx)
-			vf_efx->pci_dev->driver->remove(vf_efx->pci_dev);
-	}
-
+	/* Disable SRIOV and remove any VFs in the host */
 	rc = efx_ef10_pci_sriov_disable(efx, true);
 	if (rc)
 		netif_dbg(efx, drv, efx->net_dev,
-- 
2.30.2

[PATCH AUTOSEL 5.4 62/74] sfc: error code if SRIOV cannot be disabled

[Sasha Levin]

From: Íñigo Huguet <ihuguet@redhat.com>

[ Upstream commit 1ebe4feb8b442884f5a28d2437040096723dd1ea ]

If SRIOV cannot be disabled during device removal or module unloading,
return error code so it can be logged properly in the calling function.

Note that this can only happen if any VF is currently attached to a
guest using Xen, but not with vfio/KVM. Despite that in that case the
VFs won't work properly with PF removed and/or the module unloaded, I
have let it as is because I don't know what side effects may have
changing it, and also it seems to be the same that other drivers are
doing in this situation.

In the case of being called during SRIOV reconfiguration, the behavior
hasn't changed because the function is called with force=false.

Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/sfc/ef10_sriov.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/sfc/ef10_sriov.c b/drivers/net/ethernet/sfc/ef10_sriov.c
index 695e3508b4d8..e7c6aa29d323 100644
--- a/drivers/net/ethernet/sfc/ef10_sriov.c
+++ b/drivers/net/ethernet/sfc/ef10_sriov.c
@@ -403,12 +403,17 @@ static int efx_ef10_pci_sriov_enable(struct efx_nic *efx, int num_vfs)
 	return rc;
 }
 
+/* Disable SRIOV and remove VFs
+ * If some VFs are attached to a guest (using Xen, only) nothing is
+ * done if force=false, and vports are freed if force=true (for the non
+ * attachedc ones, only) but SRIOV is not disabled and VFs are not
+ * removed in either case.
+ */
 static int efx_ef10_pci_sriov_disable(struct efx_nic *efx, bool force)
 {
 	struct pci_dev *dev = efx->pci_dev;
-	unsigned int vfs_assigned = 0;
-
-	vfs_assigned = pci_vfs_assigned(dev);
+	unsigned int vfs_assigned = pci_vfs_assigned(dev);
+	int rc = 0;
 
 	if (vfs_assigned && !force) {
 		netif_info(efx, drv, efx->net_dev, "VFs are assigned to guests; "
@@ -418,10 +423,12 @@ static int efx_ef10_pci_sriov_disable(struct efx_nic *efx, bool force)
 
 	if (!vfs_assigned)
 		pci_disable_sriov(dev);
+	else
+		rc = -EBUSY;
 
 	efx_ef10_sriov_free_vf_vswitching(efx);
 	efx->vf_count = 0;
-	return 0;
+	return rc;
 }
 
 int efx_ef10_sriov_configure(struct efx_nic *efx, int num_vfs)
-- 
2.30.2

[PATCH AUTOSEL 5.4 63/74] wireless: wext-spy: Fix out-of-bounds warning

[Sasha Levin]

From: "Gustavo A. R. Silva" <gustavoars@kernel.org>

[ Upstream commit e93bdd78406da9ed01554c51e38b2a02c8ef8025 ]

Fix the following out-of-bounds warning:

net/wireless/wext-spy.c:178:2: warning: 'memcpy' offset [25, 28] from the object at 'threshold' is out of the bounds of referenced subobject 'low' with type 'struct iw_quality' at offset 20 [-Warray-bounds]

The problem is that the original code is trying to copy data into a
couple of struct members adjacent to each other in a single call to
memcpy(). This causes a legitimate compiler warning because memcpy()
overruns the length of &threshold.low and &spydata->spy_thr_low. As
these are just a couple of struct members, fix this by using direct
assignments, instead of memcpy().

This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().

Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210422200032.GA168995@embeddedor
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/wext-spy.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/net/wireless/wext-spy.c b/net/wireless/wext-spy.c
index 33bef22e44e9..b379a0371653 100644
--- a/net/wireless/wext-spy.c
+++ b/net/wireless/wext-spy.c
@@ -120,8 +120,8 @@ int iw_handler_set_thrspy(struct net_device *	dev,
 		return -EOPNOTSUPP;
 
 	/* Just do it */
-	memcpy(&(spydata->spy_thr_low), &(threshold->low),
-	       2 * sizeof(struct iw_quality));
+	spydata->spy_thr_low = threshold->low;
+	spydata->spy_thr_high = threshold->high;
 
 	/* Clear flag */
 	memset(spydata->spy_thr_under, '\0', sizeof(spydata->spy_thr_under));
@@ -147,8 +147,8 @@ int iw_handler_get_thrspy(struct net_device *	dev,
 		return -EOPNOTSUPP;
 
 	/* Just do it */
-	memcpy(&(threshold->low), &(spydata->spy_thr_low),
-	       2 * sizeof(struct iw_quality));
+	threshold->low = spydata->spy_thr_low;
+	threshold->high = spydata->spy_thr_high;
 
 	return 0;
 }
@@ -173,10 +173,10 @@ static void iw_send_thrspy_event(struct net_device *	dev,
 	memcpy(threshold.addr.sa_data, address, ETH_ALEN);
 	threshold.addr.sa_family = ARPHRD_ETHER;
 	/* Copy stats */
-	memcpy(&(threshold.qual), wstats, sizeof(struct iw_quality));
+	threshold.qual = *wstats;
 	/* Copy also thresholds */
-	memcpy(&(threshold.low), &(spydata->spy_thr_low),
-	       2 * sizeof(struct iw_quality));
+	threshold.low = spydata->spy_thr_low;
+	threshold.high = spydata->spy_thr_high;
 
 	/* Send event to user space */
 	wireless_send_event(dev, SIOCGIWTHRSPY, &wrqu, (char *) &threshold);
-- 
2.30.2

[PATCH AUTOSEL 5.4 64/74] media, bpf: Do not copy more entries than user space requested

[Sasha Levin]

From: Sean Young <sean@mess.org>

[ Upstream commit 647d446d66e493d23ca1047fa8492b0269674530 ]

The syscall bpf(BPF_PROG_QUERY, &attr) should use the prog_cnt field to
see how many entries user space provided and return ENOSPC if there are
more programs than that. Before this patch, this is not checked and
ENOSPC is never returned.

Note that one lirc device is limited to 64 bpf programs, and user space
I'm aware of -- ir-keytable -- always gives enough space for 64 entries
already. However, we should not copy program ids than are requested.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210623213754.632-1-sean@mess.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/rc/bpf-lirc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/media/rc/bpf-lirc.c b/drivers/media/rc/bpf-lirc.c
index 0a0ce620e4a2..d5f839fdcde7 100644
--- a/drivers/media/rc/bpf-lirc.c
+++ b/drivers/media/rc/bpf-lirc.c
@@ -329,7 +329,8 @@ int lirc_prog_query(const union bpf_attr *attr, union bpf_attr __user *uattr)
 	}
 
 	if (attr->query.prog_cnt != 0 && prog_ids && cnt)
-		ret = bpf_prog_array_copy_to_user(progs, prog_ids, cnt);
+		ret = bpf_prog_array_copy_to_user(progs, prog_ids,
+						  attr->query.prog_cnt);
 
 unlock:
 	mutex_unlock(&ir_raw_handler_lock);
-- 
2.30.2

[PATCH AUTOSEL 5.4 65/74] net: ip: avoid OOM kills with large UDP sends over loopback

[Sasha Levin]

From: Jakub Kicinski <kuba@kernel.org>

[ Upstream commit 6d123b81ac615072a8525c13c6c41b695270a15d ]

Dave observed number of machines hitting OOM on the UDP send
path. The workload seems to be sending large UDP packets over
loopback. Since loopback has MTU of 64k kernel will try to
allocate an skb with up to 64k of head space. This has a good
chance of failing under memory pressure. What's worse if
the message length is <32k the allocation may trigger an
OOM killer.

This is entirely avoidable, we can use an skb with page frags.

af_unix solves a similar problem by limiting the head
length to SKB_MAX_ALLOC. This seems like a good and simple
approach. It means that UDP messages > 16kB will now
use fragments if underlying device supports SG, if extra
allocator pressure causes regressions in real workloads
we can switch to trying the large allocation first and
falling back.

v4: pre-calculate all the additions to alloclen so
    we can be sure it won't go over order-2

Reported-by: Dave Jones <dsj@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/ip_output.c  | 32 ++++++++++++++++++--------------
 net/ipv6/ip6_output.c | 32 +++++++++++++++++---------------
 2 files changed, 35 insertions(+), 29 deletions(-)

diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index 7a394479dd56..f52bc9c22e5b 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -1048,7 +1048,7 @@ static int __ip_append_data(struct sock *sk,
 			unsigned int datalen;
 			unsigned int fraglen;
 			unsigned int fraggap;
-			unsigned int alloclen;
+			unsigned int alloclen, alloc_extra;
 			unsigned int pagedlen;
 			struct sk_buff *skb_prev;
 alloc_new_skb:
@@ -1068,35 +1068,39 @@ static int __ip_append_data(struct sock *sk,
 			fraglen = datalen + fragheaderlen;
 			pagedlen = 0;
 
+			alloc_extra = hh_len + 15;
+			alloc_extra += exthdrlen;
+
+			/* The last fragment gets additional space at tail.
+			 * Note, with MSG_MORE we overallocate on fragments,
+			 * because we have no idea what fragment will be
+			 * the last.
+			 */
+			if (datalen == length + fraggap)
+				alloc_extra += rt->dst.trailer_len;
+
 			if ((flags & MSG_MORE) &&
 			    !(rt->dst.dev->features&NETIF_F_SG))
 				alloclen = mtu;
-			else if (!paged)
+			else if (!paged &&
+				 (fraglen + alloc_extra < SKB_MAX_ALLOC ||
+				  !(rt->dst.dev->features & NETIF_F_SG)))
 				alloclen = fraglen;
 			else {
 				alloclen = min_t(int, fraglen, MAX_HEADER);
 				pagedlen = fraglen - alloclen;
 			}
 
-			alloclen += exthdrlen;
-
-			/* The last fragment gets additional space at tail.
-			 * Note, with MSG_MORE we overallocate on fragments,
-			 * because we have no idea what fragment will be
-			 * the last.
-			 */
-			if (datalen == length + fraggap)
-				alloclen += rt->dst.trailer_len;
+			alloclen += alloc_extra;
 
 			if (transhdrlen) {
-				skb = sock_alloc_send_skb(sk,
-						alloclen + hh_len + 15,
+				skb = sock_alloc_send_skb(sk, alloclen,
 						(flags & MSG_DONTWAIT), &err);
 			} else {
 				skb = NULL;
 				if (refcount_read(&sk->sk_wmem_alloc) + wmem_alloc_delta <=
 				    2 * sk->sk_sndbuf)
-					skb = alloc_skb(alloclen + hh_len + 15,
+					skb = alloc_skb(alloclen,
 							sk->sk_allocation);
 				if (unlikely(!skb))
 					err = -ENOBUFS;
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 7a80c42fcce2..4dcbb1ccab25 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -1484,7 +1484,7 @@ static int __ip6_append_data(struct sock *sk,
 			unsigned int datalen;
 			unsigned int fraglen;
 			unsigned int fraggap;
-			unsigned int alloclen;
+			unsigned int alloclen, alloc_extra;
 			unsigned int pagedlen;
 alloc_new_skb:
 			/* There's no room in the current skb */
@@ -1511,17 +1511,28 @@ static int __ip6_append_data(struct sock *sk,
 			fraglen = datalen + fragheaderlen;
 			pagedlen = 0;
 
+			alloc_extra = hh_len;
+			alloc_extra += dst_exthdrlen;
+			alloc_extra += rt->dst.trailer_len;
+
+			/* We just reserve space for fragment header.
+			 * Note: this may be overallocation if the message
+			 * (without MSG_MORE) fits into the MTU.
+			 */
+			alloc_extra += sizeof(struct frag_hdr);
+
 			if ((flags & MSG_MORE) &&
 			    !(rt->dst.dev->features&NETIF_F_SG))
 				alloclen = mtu;
-			else if (!paged)
+			else if (!paged &&
+				 (fraglen + alloc_extra < SKB_MAX_ALLOC ||
+				  !(rt->dst.dev->features & NETIF_F_SG)))
 				alloclen = fraglen;
 			else {
 				alloclen = min_t(int, fraglen, MAX_HEADER);
 				pagedlen = fraglen - alloclen;
 			}
-
-			alloclen += dst_exthdrlen;
+			alloclen += alloc_extra;
 
 			if (datalen != length + fraggap) {
 				/*
@@ -1531,30 +1542,21 @@ static int __ip6_append_data(struct sock *sk,
 				datalen += rt->dst.trailer_len;
 			}
 
-			alloclen += rt->dst.trailer_len;
 			fraglen = datalen + fragheaderlen;
 
-			/*
-			 * We just reserve space for fragment header.
-			 * Note: this may be overallocation if the message
-			 * (without MSG_MORE) fits into the MTU.
-			 */
-			alloclen += sizeof(struct frag_hdr);
-
 			copy = datalen - transhdrlen - fraggap - pagedlen;
 			if (copy < 0) {
 				err = -EINVAL;
 				goto error;
 			}
 			if (transhdrlen) {
-				skb = sock_alloc_send_skb(sk,
-						alloclen + hh_len,
+				skb = sock_alloc_send_skb(sk, alloclen,
 						(flags & MSG_DONTWAIT), &err);
 			} else {
 				skb = NULL;
 				if (refcount_read(&sk->sk_wmem_alloc) + wmem_alloc_delta <=
 				    2 * sk->sk_sndbuf)
-					skb = alloc_skb(alloclen + hh_len,
+					skb = alloc_skb(alloclen,
 							sk->sk_allocation);
 				if (unlikely(!skb))
 					err = -ENOBUFS;
-- 
2.30.2

[PATCH AUTOSEL 5.4 68/74] Bluetooth: Fix the HCI to MGMT status conversion table

[Sasha Levin]

From: Yu Liu <yudiliu@google.com>

[ Upstream commit 4ef36a52b0e47c80bbfd69c0cce61c7ae9f541ed ]

0x2B, 0x31 and 0x33 are reserved for future use but were not present in
the HCI to MGMT conversion table, this caused the conversion to be
incorrect for the HCI status code greater than 0x2A.

Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Yu Liu <yudiliu@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/mgmt.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index 5fce559a61bf..bbe59cad95c2 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -219,12 +219,15 @@ static u8 mgmt_status_table[] = {
 	MGMT_STATUS_TIMEOUT,		/* Instant Passed */
 	MGMT_STATUS_NOT_SUPPORTED,	/* Pairing Not Supported */
 	MGMT_STATUS_FAILED,		/* Transaction Collision */
+	MGMT_STATUS_FAILED,		/* Reserved for future use */
 	MGMT_STATUS_INVALID_PARAMS,	/* Unacceptable Parameter */
 	MGMT_STATUS_REJECTED,		/* QoS Rejected */
 	MGMT_STATUS_NOT_SUPPORTED,	/* Classification Not Supported */
 	MGMT_STATUS_REJECTED,		/* Insufficient Security */
 	MGMT_STATUS_INVALID_PARAMS,	/* Parameter Out Of Range */
+	MGMT_STATUS_FAILED,		/* Reserved for future use */
 	MGMT_STATUS_BUSY,		/* Role Switch Pending */
+	MGMT_STATUS_FAILED,		/* Reserved for future use */
 	MGMT_STATUS_FAILED,		/* Slot Violation */
 	MGMT_STATUS_FAILED,		/* Role Switch Failed */
 	MGMT_STATUS_INVALID_PARAMS,	/* EIR Too Large */
-- 
2.30.2

[PATCH AUTOSEL 5.4 69/74] Bluetooth: Shutdown controller after workqueues are flushed or cancelled

[Sasha Levin]

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

[ Upstream commit 0ea9fd001a14ebc294f112b0361a4e601551d508 ]

Rfkill block and unblock Intel USB Bluetooth [8087:0026] may make it
stops working:
[  509.691509] Bluetooth: hci0: HCI reset during shutdown failed
[  514.897584] Bluetooth: hci0: MSFT filter_enable is already on
[  530.044751] usb 3-10: reset full-speed USB device number 5 using xhci_hcd
[  545.660350] usb 3-10: device descriptor read/64, error -110
[  561.283530] usb 3-10: device descriptor read/64, error -110
[  561.519682] usb 3-10: reset full-speed USB device number 5 using xhci_hcd
[  566.686650] Bluetooth: hci0: unexpected event for opcode 0x0500
[  568.752452] Bluetooth: hci0: urb 0000000096cd309b failed to resubmit (113)
[  578.797955] Bluetooth: hci0: Failed to read MSFT supported features (-110)
[  586.286565] Bluetooth: hci0: urb 00000000c522f633 failed to resubmit (113)
[  596.215302] Bluetooth: hci0: Failed to read MSFT supported features (-110)

Or kernel panics because other workqueues already freed skb:
[ 2048.663763] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 2048.663775] #PF: supervisor read access in kernel mode
[ 2048.663779] #PF: error_code(0x0000) - not-present page
[ 2048.663782] PGD 0 P4D 0
[ 2048.663787] Oops: 0000 [#1] SMP NOPTI
[ 2048.663793] CPU: 3 PID: 4491 Comm: rfkill Tainted: G        W         5.13.0-rc1-next-20210510+ #20
[ 2048.663799] Hardware name: HP HP EliteBook 850 G8 Notebook PC/8846, BIOS T76 Ver. 01.01.04 12/02/2020
[ 2048.663801] RIP: 0010:__skb_ext_put+0x6/0x50
[ 2048.663814] Code: 8b 1b 48 85 db 75 db 5b 41 5c 5d c3 be 01 00 00 00 e8 de 13 c0 ff eb e7 be 02 00 00 00 e8 d2 13 c0 ff eb db 0f 1f 44 00 00 55 <8b> 07 48 89 e5 83 f8 01 74 14 b8 ff ff ff ff f0 0f c1
07 83 f8 01
[ 2048.663819] RSP: 0018:ffffc1d105b6fd80 EFLAGS: 00010286
[ 2048.663824] RAX: 0000000000000000 RBX: ffff9d9ac5649000 RCX: 0000000000000000
[ 2048.663827] RDX: ffffffffc0d1daf6 RSI: 0000000000000206 RDI: 0000000000000000
[ 2048.663830] RBP: ffffc1d105b6fd98 R08: 0000000000000001 R09: ffff9d9ace8ceac0
[ 2048.663834] R10: ffff9d9ace8ceac0 R11: 0000000000000001 R12: ffff9d9ac5649000
[ 2048.663838] R13: 0000000000000000 R14: 00007ffe0354d650 R15: 0000000000000000
[ 2048.663843] FS:  00007fe02ab19740(0000) GS:ffff9d9e5f8c0000(0000) knlGS:0000000000000000
[ 2048.663849] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2048.663853] CR2: 0000000000000000 CR3: 0000000111a52004 CR4: 0000000000770ee0
[ 2048.663856] PKRU: 55555554
[ 2048.663859] Call Trace:
[ 2048.663865]  ? skb_release_head_state+0x5e/0x80
[ 2048.663873]  kfree_skb+0x2f/0xb0
[ 2048.663881]  btusb_shutdown_intel_new+0x36/0x60 [btusb]
[ 2048.663905]  hci_dev_do_close+0x48c/0x5e0 [bluetooth]
[ 2048.663954]  ? __cond_resched+0x1a/0x50
[ 2048.663962]  hci_rfkill_set_block+0x56/0xa0 [bluetooth]
[ 2048.664007]  rfkill_set_block+0x98/0x170
[ 2048.664016]  rfkill_fop_write+0x136/0x1e0
[ 2048.664022]  vfs_write+0xc7/0x260
[ 2048.664030]  ksys_write+0xb1/0xe0
[ 2048.664035]  ? exit_to_user_mode_prepare+0x37/0x1c0
[ 2048.664042]  __x64_sys_write+0x1a/0x20
[ 2048.664048]  do_syscall_64+0x40/0xb0
[ 2048.664055]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 2048.664060] RIP: 0033:0x7fe02ac23c27
[ 2048.664066] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
[ 2048.664070] RSP: 002b:00007ffe0354d638 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 2048.664075] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fe02ac23c27
[ 2048.664078] RDX: 0000000000000008 RSI: 00007ffe0354d650 RDI: 0000000000000003
[ 2048.664081] RBP: 0000000000000000 R08: 0000559b05998440 R09: 0000559b05998440
[ 2048.664084] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003
[ 2048.664086] R13: 0000000000000000 R14: ffffffff00000000 R15: 00000000ffffffff

So move the shutdown callback to a place where workqueues are either
flushed or cancelled to resolve the issue.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_core.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 21a7ea9b70c8..37b585c9e857 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -1672,14 +1672,6 @@ int hci_dev_do_close(struct hci_dev *hdev)
 
 	BT_DBG("%s %p", hdev->name, hdev);
 
-	if (!hci_dev_test_flag(hdev, HCI_UNREGISTER) &&
-	    !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) &&
-	    test_bit(HCI_UP, &hdev->flags)) {
-		/* Execute vendor specific shutdown routine */
-		if (hdev->shutdown)
-			hdev->shutdown(hdev);
-	}
-
 	cancel_delayed_work(&hdev->power_off);
 
 	hci_request_cancel_all(hdev);
@@ -1753,6 +1745,14 @@ int hci_dev_do_close(struct hci_dev *hdev)
 		clear_bit(HCI_INIT, &hdev->flags);
 	}
 
+	if (!hci_dev_test_flag(hdev, HCI_UNREGISTER) &&
+	    !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) &&
+	    test_bit(HCI_UP, &hdev->flags)) {
+		/* Execute vendor specific shutdown routine */
+		if (hdev->shutdown)
+			hdev->shutdown(hdev);
+	}
+
 	/* flush cmd  work */
 	flush_work(&hdev->cmd_work);
 
-- 
2.30.2

[PATCH AUTOSEL 5.4 71/74] sctp: validate from_addr_param return

[Sasha Levin]

From: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>

[ Upstream commit 0c5dc070ff3d6246d22ddd931f23a6266249e3db ]

Ilja reported that, simply putting it, nothing was validating that
from_addr_param functions were operating on initialized memory. That is,
the parameter itself was being validated by sctp_walk_params, but it
doesn't check for types and their specific sizes and it could be a 0-length
one, causing from_addr_param to potentially work over the next parameter or
even uninitialized memory.

The fix here is to, in all calls to from_addr_param, check if enough space
is there for the wanted IP address type.

Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/sctp/structs.h |  2 +-
 net/sctp/bind_addr.c       | 19 +++++++++++--------
 net/sctp/input.c           |  6 ++++--
 net/sctp/ipv6.c            |  7 ++++++-
 net/sctp/protocol.c        |  7 ++++++-
 net/sctp/sm_make_chunk.c   | 29 ++++++++++++++++-------------
 6 files changed, 44 insertions(+), 26 deletions(-)

diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
index 3e8f87a3c52f..fd7c3f76040c 100644
--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -466,7 +466,7 @@ struct sctp_af {
 					 int saddr);
 	void		(*from_sk)	(union sctp_addr *,
 					 struct sock *sk);
-	void		(*from_addr_param) (union sctp_addr *,
+	bool		(*from_addr_param) (union sctp_addr *,
 					    union sctp_addr_param *,
 					    __be16 port, int iif);
 	int		(*to_addr_param) (const union sctp_addr *,
diff --git a/net/sctp/bind_addr.c b/net/sctp/bind_addr.c
index 701c5a4e441d..a825e74d01fc 100644
--- a/net/sctp/bind_addr.c
+++ b/net/sctp/bind_addr.c
@@ -270,22 +270,19 @@ int sctp_raw_to_bind_addrs(struct sctp_bind_addr *bp, __u8 *raw_addr_list,
 		rawaddr = (union sctp_addr_param *)raw_addr_list;
 
 		af = sctp_get_af_specific(param_type2af(param->type));
-		if (unlikely(!af)) {
+		if (unlikely(!af) ||
+		    !af->from_addr_param(&addr, rawaddr, htons(port), 0)) {
 			retval = -EINVAL;
-			sctp_bind_addr_clean(bp);
-			break;
+			goto out_err;
 		}
 
-		af->from_addr_param(&addr, rawaddr, htons(port), 0);
 		if (sctp_bind_addr_state(bp, &addr) != -1)
 			goto next;
 		retval = sctp_add_bind_addr(bp, &addr, sizeof(addr),
 					    SCTP_ADDR_SRC, gfp);
-		if (retval) {
+		if (retval)
 			/* Can't finish building the list, clean up. */
-			sctp_bind_addr_clean(bp);
-			break;
-		}
+			goto out_err;
 
 next:
 		len = ntohs(param->length);
@@ -294,6 +291,12 @@ int sctp_raw_to_bind_addrs(struct sctp_bind_addr *bp, __u8 *raw_addr_list,
 	}
 
 	return retval;
+
+out_err:
+	if (retval)
+		sctp_bind_addr_clean(bp);
+
+	return retval;
 }
 
 /********************************************************************
diff --git a/net/sctp/input.c b/net/sctp/input.c
index 7807754f69c5..a84523284777 100644
--- a/net/sctp/input.c
+++ b/net/sctp/input.c
@@ -1131,7 +1131,8 @@ static struct sctp_association *__sctp_rcv_init_lookup(struct net *net,
 		if (!af)
 			continue;
 
-		af->from_addr_param(paddr, params.addr, sh->source, 0);
+		if (!af->from_addr_param(paddr, params.addr, sh->source, 0))
+			continue;
 
 		asoc = __sctp_lookup_association(net, laddr, paddr, transportp);
 		if (asoc)
@@ -1174,7 +1175,8 @@ static struct sctp_association *__sctp_rcv_asconf_lookup(
 	if (unlikely(!af))
 		return NULL;
 
-	af->from_addr_param(&paddr, param, peer_port, 0);
+	if (af->from_addr_param(&paddr, param, peer_port, 0))
+		return NULL;
 
 	return __sctp_lookup_association(net, laddr, &paddr, transportp);
 }
diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c
index 52c92b8d827f..fae6157e837a 100644
--- a/net/sctp/ipv6.c
+++ b/net/sctp/ipv6.c
@@ -530,15 +530,20 @@ static void sctp_v6_to_sk_daddr(union sctp_addr *addr, struct sock *sk)
 }
 
 /* Initialize a sctp_addr from an address parameter. */
-static void sctp_v6_from_addr_param(union sctp_addr *addr,
+static bool sctp_v6_from_addr_param(union sctp_addr *addr,
 				    union sctp_addr_param *param,
 				    __be16 port, int iif)
 {
+	if (ntohs(param->v6.param_hdr.length) < sizeof(struct sctp_ipv6addr_param))
+		return false;
+
 	addr->v6.sin6_family = AF_INET6;
 	addr->v6.sin6_port = port;
 	addr->v6.sin6_flowinfo = 0; /* BUG */
 	addr->v6.sin6_addr = param->v6.addr;
 	addr->v6.sin6_scope_id = iif;
+
+	return true;
 }
 
 /* Initialize an address parameter from a sctp_addr and return the length
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index 981c7cbca46a..7f8702abc7bf 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -253,14 +253,19 @@ static void sctp_v4_to_sk_daddr(union sctp_addr *addr, struct sock *sk)
 }
 
 /* Initialize a sctp_addr from an address parameter. */
-static void sctp_v4_from_addr_param(union sctp_addr *addr,
+static bool sctp_v4_from_addr_param(union sctp_addr *addr,
 				    union sctp_addr_param *param,
 				    __be16 port, int iif)
 {
+	if (ntohs(param->v4.param_hdr.length) < sizeof(struct sctp_ipv4addr_param))
+		return false;
+
 	addr->v4.sin_family = AF_INET;
 	addr->v4.sin_port = port;
 	addr->v4.sin_addr.s_addr = param->v4.addr.s_addr;
 	memset(addr->v4.sin_zero, 0, sizeof(addr->v4.sin_zero));
+
+	return true;
 }
 
 /* Initialize an address parameter from a sctp_addr and return the length
diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index 4ffb9116b6f2..38ca7ce8a44e 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -2337,11 +2337,13 @@ int sctp_process_init(struct sctp_association *asoc, struct sctp_chunk *chunk,
 
 	/* Process the initialization parameters.  */
 	sctp_walk_params(param, peer_init, init_hdr.params) {
-		if (!src_match && (param.p->type == SCTP_PARAM_IPV4_ADDRESS ||
-		    param.p->type == SCTP_PARAM_IPV6_ADDRESS)) {
+		if (!src_match &&
+		    (param.p->type == SCTP_PARAM_IPV4_ADDRESS ||
+		     param.p->type == SCTP_PARAM_IPV6_ADDRESS)) {
 			af = sctp_get_af_specific(param_type2af(param.p->type));
-			af->from_addr_param(&addr, param.addr,
-					    chunk->sctp_hdr->source, 0);
+			if (!af->from_addr_param(&addr, param.addr,
+						 chunk->sctp_hdr->source, 0))
+				continue;
 			if (sctp_cmp_addr_exact(sctp_source(chunk), &addr))
 				src_match = 1;
 		}
@@ -2522,7 +2524,8 @@ static int sctp_process_param(struct sctp_association *asoc,
 			break;
 do_addr_param:
 		af = sctp_get_af_specific(param_type2af(param.p->type));
-		af->from_addr_param(&addr, param.addr, htons(asoc->peer.port), 0);
+		if (!af->from_addr_param(&addr, param.addr, htons(asoc->peer.port), 0))
+			break;
 		scope = sctp_scope(peer_addr);
 		if (sctp_in_scope(net, &addr, scope))
 			if (!sctp_assoc_add_peer(asoc, &addr, gfp, SCTP_UNCONFIRMED))
@@ -2623,15 +2626,13 @@ static int sctp_process_param(struct sctp_association *asoc,
 		addr_param = param.v + sizeof(struct sctp_addip_param);
 
 		af = sctp_get_af_specific(param_type2af(addr_param->p.type));
-		if (af == NULL)
+		if (!af)
 			break;
 
-		af->from_addr_param(&addr, addr_param,
-				    htons(asoc->peer.port), 0);
+		if (!af->from_addr_param(&addr, addr_param,
+					 htons(asoc->peer.port), 0))
+			break;
 
-		/* if the address is invalid, we can't process it.
-		 * XXX: see spec for what to do.
-		 */
 		if (!af->addr_valid(&addr, NULL, NULL))
 			break;
 
@@ -3045,7 +3046,8 @@ static __be16 sctp_process_asconf_param(struct sctp_association *asoc,
 	if (unlikely(!af))
 		return SCTP_ERROR_DNS_FAILED;
 
-	af->from_addr_param(&addr, addr_param, htons(asoc->peer.port), 0);
+	if (!af->from_addr_param(&addr, addr_param, htons(asoc->peer.port), 0))
+		return SCTP_ERROR_DNS_FAILED;
 
 	/* ADDIP 4.2.1  This parameter MUST NOT contain a broadcast
 	 * or multicast address.
@@ -3322,7 +3324,8 @@ static void sctp_asconf_param_success(struct sctp_association *asoc,
 
 	/* We have checked the packet before, so we do not check again.	*/
 	af = sctp_get_af_specific(param_type2af(addr_param->p.type));
-	af->from_addr_param(&addr, addr_param, htons(bp->port), 0);
+	if (!af->from_addr_param(&addr, addr_param, htons(bp->port), 0))
+		return;
 
 	switch (asconf_param->param_hdr.type) {
 	case SCTP_PARAM_ADD_IP:
-- 
2.30.2

[PATCH AUTOSEL 5.4 72/74] sctp: add size validation when walking chunks

[Sasha Levin]

From: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>

[ Upstream commit 50619dbf8db77e98d821d615af4f634d08e22698 ]

The first chunk in a packet is ensured to be present at the beginning of
sctp_rcv(), as a packet needs to have at least 1 chunk. But the second
one, may not be completely available and ch->length can be over
uninitialized memory.

Fix here is by only trying to walk on the next chunk if there is enough to
hold at least the header, and then proceed with the ch->length validation
that is already there.

Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sctp/input.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/sctp/input.c b/net/sctp/input.c
index a84523284777..ab84ebf1af4a 100644
--- a/net/sctp/input.c
+++ b/net/sctp/input.c
@@ -1247,7 +1247,7 @@ static struct sctp_association *__sctp_rcv_walk_lookup(struct net *net,
 
 		ch = (struct sctp_chunkhdr *)ch_end;
 		chunk_num++;
-	} while (ch_end < skb_tail_pointer(skb));
+	} while (ch_end + sizeof(*ch) < skb_tail_pointer(skb));
 
 	return asoc;
 }
-- 
2.30.2