Re: [PATCH v5 2/2] net: phy: add Maxlinear GPY115/21x/24x driver

["Russell King (Oracle)" <linux@armlinux.org.uk>]

On Tue, Jul 06, 2021 at 03:34:56PM +0000, Liang Xu wrote:
> On 1/7/2021 4:26 pm, Xu Liang wrote:
> > Add driver to support the Maxlinear GPY115, GPY211, GPY212, GPY215,
> > GPY241, GPY245 PHYs. Separate from XWAY PHY driver because this series
> > has different register layout and new features not supported in XWAY PHY.
> >
> > Signed-off-by: Xu Liang <lxu@maxlinear.com>
> > ---
> > v2 changes:
> >   Fix format warning from checkpath and some comments.
> >   Use smaller PHY ID mask.
> >   Split FWV register mask.
> >   Call phy_trigger_machine if necessary when clear interrupt.
> > v3 changes:
> >   Replace unnecessary phy_modify_mmd_changed with phy_modify_mmd
> >   Move firmware version print to probe.
> > v4 changes:
> >   Separate PHY ID for new silicon.
> >   Use full Maxlinear name in Kconfig.
> >   Add and use C45 ID read API, and use genphy_c45_pma_read_abilities.
> >   Use my name instead of company as author.
> > v5 changes:
> >   Fix comment for link speed 2.5G.
> 
> Hi Andrew,
> 
> 
> Need your help on this patch.
> 
> https://patchwork.kernel.org/project/netdevbpf/patch/20210701082658.21875-1-lxu@maxlinear.com/
> 
> I see the status is "Not applicable" and description "Guessing tree name 
> failed - patch did not apply".
> 
> How should I fix the problem?

For netdev, the subject line should contain the tree that you want
the patch applied to.

So, "[PATCH net n/N] ..." or "[PATCH net-next n/N] ..."

In this case, because it isn't a fix, you want net-next. However, as
we are in the upstream merge window, the net-next tree is currently
closed to new submissions. Please wait until it has reopened, which
will after -rc1 has been released.

You can check the current status of net-next at:
	http://vger.kernel.org/~davem/net-next.html

Thanks.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!