[PATCH net] net: bcmgenet: Ensure all TX/RX queues DMAs are disabled

[Florian Fainelli <f.fainelli@gmail.com>]

Make sure that we disable each of the TX and RX queues in the TDMA and
RDMA control registers. This is a correctness change to be symmetrical
with the code that enables the TX and RX queues.

Tested-by: Maxime Ripard <maxime@cerno.tech>
Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 35e9956e930c..db74241935ab 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -3238,15 +3238,21 @@ static void bcmgenet_get_hw_addr(struct bcmgenet_priv *priv,
 /* Returns a reusable dma control register value */
 static u32 bcmgenet_dma_disable(struct bcmgenet_priv *priv)
 {
+	unsigned int i;
 	u32 reg;
 	u32 dma_ctrl;
 
 	/* disable DMA */
 	dma_ctrl = 1 << (DESC_INDEX + DMA_RING_BUF_EN_SHIFT) | DMA_EN;
+	for (i = 0; i < priv->hw_params->tx_queues; i++)
+		dma_ctrl |= (1 << (i + DMA_RING_BUF_EN_SHIFT));
 	reg = bcmgenet_tdma_readl(priv, DMA_CTRL);
 	reg &= ~dma_ctrl;
 	bcmgenet_tdma_writel(priv, reg, DMA_CTRL);
 
+	dma_ctrl = 1 << (DESC_INDEX + DMA_RING_BUF_EN_SHIFT) | DMA_EN;
+	for (i = 0; i < priv->hw_params->rx_queues; i++)
+		dma_ctrl |= (1 << (i + DMA_RING_BUF_EN_SHIFT));
 	reg = bcmgenet_rdma_readl(priv, DMA_CTRL);
 	reg &= ~dma_ctrl;
 	bcmgenet_rdma_writel(priv, reg, DMA_CTRL);
-- 
2.25.1