Re: [RFC PATCH net-next] net: dpaa2-mac: add support for more ethtool 10G link modes

[Ioana Ciornei <ioana.ciornei@nxp.com>]

On Mon, Jul 12, 2021 at 04:47:10PM +0100, Russell King wrote:
> Phylink documentation says:
>  * Note that the PHY may be able to transform from one connection
>  * technology to another, so, eg, don't clear 1000BaseX just
>  * because the MAC is unable to BaseX mode. This is more about
>  * clearing unsupported speeds and duplex settings. The port modes
>  * should not be cleared; phylink_set_port_modes() will help with this.
> 
> So add the missing 10G modes.
> 
> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Acked-by: Ioana Ciornei <ioana.ciornei@nxp.com>

> ---
> net-next is currently closed, but I'd like to collect acks for this
> patch. Thanks.
> 
>  drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
> index ae6d382d8735..543c1f202420 100644
> --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
> +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
> @@ -140,6 +140,11 @@ static void dpaa2_mac_validate(struct phylink_config *config,
>  	case PHY_INTERFACE_MODE_10GBASER:
>  	case PHY_INTERFACE_MODE_USXGMII:
>  		phylink_set(mask, 10000baseT_Full);
> +		phylink_set(mask, 10000baseCR_Full);
> +		phylink_set(mask, 10000baseSR_Full);
> +		phylink_set(mask, 10000baseLR_Full);
> +		phylink_set(mask, 10000baseLRM_Full);
> +		phylink_set(mask, 10000baseER_Full);
>  		if (state->interface == PHY_INTERFACE_MODE_10GBASER)
>  			break;
>  		phylink_set(mask, 5000baseT_Full);
> -- 
> 2.20.1
>