netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Richard Cochran <richardcochran@gmail.com>
Subject: [PATCH v1 net-next 1/7] ptp_pch: use mac_pton()
Date: Fri, 13 Aug 2021 15:29:26 +0300	[thread overview]
Message-ID: <20210813122932.46152-1-andriy.shevchenko@linux.intel.com> (raw)

Use mac_pton() instead of custom approach.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/ptp/ptp_pch.c | 41 ++++++++++-------------------------------
 1 file changed, 10 insertions(+), 31 deletions(-)

diff --git a/drivers/ptp/ptp_pch.c b/drivers/ptp/ptp_pch.c
index a17e8cc642c5..76ba94f419ff 100644
--- a/drivers/ptp/ptp_pch.c
+++ b/drivers/ptp/ptp_pch.c
@@ -100,7 +100,6 @@ struct pch_ts_regs {
 #define PCH_ECS_ETH		(1 << 0)
 
 #define PCH_ECS_CAN		(1 << 1)
-#define PCH_STATION_BYTES	6
 
 #define PCH_IEEE1588_ETH	(1 << 0)
 #define PCH_IEEE1588_CAN	(1 << 1)
@@ -292,8 +291,9 @@ static void pch_reset(struct pch_dev *chip)
  */
 int pch_set_station_address(u8 *addr, struct pci_dev *pdev)
 {
-	s32 i;
 	struct pch_dev *chip = pci_get_drvdata(pdev);
+	bool valid;
+	u64 mac;
 
 	/* Verify the parameter */
 	if ((chip->regs == NULL) || addr == (u8 *)NULL) {
@@ -301,37 +301,16 @@ int pch_set_station_address(u8 *addr, struct pci_dev *pdev)
 			"invalid params returning PCH_INVALIDPARAM\n");
 		return PCH_INVALIDPARAM;
 	}
-	/* For all station address bytes */
-	for (i = 0; i < PCH_STATION_BYTES; i++) {
-		u32 val;
-		s32 tmp;
 
-		tmp = hex_to_bin(addr[i * 3]);
-		if (tmp < 0) {
-			dev_err(&pdev->dev,
-				"invalid params returning PCH_INVALIDPARAM\n");
-			return PCH_INVALIDPARAM;
-		}
-		val = tmp * 16;
-		tmp = hex_to_bin(addr[(i * 3) + 1]);
-		if (tmp < 0) {
-			dev_err(&pdev->dev,
-				"invalid params returning PCH_INVALIDPARAM\n");
-			return PCH_INVALIDPARAM;
-		}
-		val += tmp;
-		/* Expects ':' separated addresses */
-		if ((i < 5) && (addr[(i * 3) + 2] != ':')) {
-			dev_err(&pdev->dev,
-				"invalid params returning PCH_INVALIDPARAM\n");
-			return PCH_INVALIDPARAM;
-		}
-
-		/* Ideally we should set the address only after validating
-							 entire string */
-		dev_dbg(&pdev->dev, "invoking pch_station_set\n");
-		iowrite32(val, &chip->regs->ts_st[i]);
+	valid = mac_pton(addr, (u8 *)&mac);
+	if (!valid) {
+		dev_err(&pdev->dev, "invalid params returning PCH_INVALIDPARAM\n");
+		return PCH_INVALIDPARAM;
 	}
+
+	dev_dbg(&pdev->dev, "invoking pch_station_set\n");
+	iowrite32(lower_32_bits(mac), &chip->regs->ts_st[0]);
+	iowrite32(upper_32_bits(mac), &chip->regs->ts_st[4]);
 	return 0;
 }
 EXPORT_SYMBOL(pch_set_station_address);
-- 
2.30.2


             reply	other threads:[~2021-08-13 12:29 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-13 12:29 Andy Shevchenko [this message]
2021-08-13 12:29 ` [PATCH v1 net-next 2/7] ptp_pch: Use ioread64_lo_hi() / iowrite64_lo_hi() Andy Shevchenko
2021-08-17 16:54   ` kernel test robot
2021-08-13 12:29 ` [PATCH v1 net-next 3/7] ptp_pch: Use ioread64_hi_lo() / iowrite64_hi_lo() Andy Shevchenko
2021-08-13 12:29 ` [PATCH v1 net-next 4/7] ptp_pch: Switch to use module_pci_driver() macro Andy Shevchenko
2021-08-13 14:34   ` kernel test robot
2021-08-13 15:13     ` Andy Shevchenko
2021-08-13 15:39       ` Andy Shevchenko
2021-08-13 18:23         ` Jakub Kicinski
2021-08-13 19:26           ` Andy Shevchenko
2021-08-13 19:38             ` Andy Shevchenko
2021-08-23  8:29           ` Andy Shevchenko
2021-08-13 16:19   ` kernel test robot
2021-08-13 12:29 ` [PATCH v1 net-next 5/7] ptp_pch: Convert to use managed functions pcim_* and devm_* Andy Shevchenko
2021-08-13 12:29 ` [PATCH v1 net-next 6/7] ptp_pch: Remove unused pch_pm_ops Andy Shevchenko
2021-08-13 12:29 ` [PATCH v1 net-next 7/7] ptp_pch: Load module automatically if ID matches Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210813122932.46152-1-andriy.shevchenko@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=richardcochran@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).