From: Dust Li <dust.li@linux.alibaba.com>
To: Julian Anastasov <ja@ssi.bg>, Simon Horman <horms@verge.net.au>,
Wensong Zhang <wensong@linux-vs.org>
Cc: lvs-devel@vger.kernel.org, netdev@vger.kernel.org,
yunhong-cgl jiang <xintian1976@gmail.com>
Subject: [PATCH net-next v2] net: ipvs: add sysctl_run_estimation to support disable estimation
Date: Thu, 19 Aug 2021 12:51:37 +0800 [thread overview]
Message-ID: <20210819045137.35447-1-dust.li@linux.alibaba.com> (raw)
estimation_timer will iterater the est_list to do estimation
for each ipvs stats. When there are lots of services, the
list can be very large.
We observiced estimation_timer() run for more then 200ms on
a machine with 104 CPU and 50K services.
yunhong-cgl jiang report the same phenomenon before:
https://www.spinics.net/lists/lvs-devel/msg05426.html
In some cases(for example a large K8S cluster with many ipvs services),
ipvs estimation may not be needed. So adding a sysctl blob to allow
users to disable this completely.
Default is: 1 (enable)
Cc: yunhong-cgl jiang <xintian1976@gmail.com>
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
---
v2: Use common sysctl facilities
---
Documentation/networking/ipvs-sysctl.rst | 17 +++++++++++++++++
include/net/ip_vs.h | 12 ++++++++++++
net/netfilter/ipvs/ip_vs_ctl.c | 8 ++++++++
net/netfilter/ipvs/ip_vs_est.c | 5 +++++
4 files changed, 42 insertions(+)
diff --git a/Documentation/networking/ipvs-sysctl.rst b/Documentation/networking/ipvs-sysctl.rst
index 2afccc63856e..e20f7a27fc85 100644
--- a/Documentation/networking/ipvs-sysctl.rst
+++ b/Documentation/networking/ipvs-sysctl.rst
@@ -300,3 +300,20 @@ sync_version - INTEGER
Kernels with this sync_version entry are able to receive messages
of both version 1 and version 2 of the synchronisation protocol.
+
+run_estimation - BOOLEAN
+ 0 - disabled
+ not 0 - enabled (default)
+
+ If disabled, the estimation will be stop, and you can't see
+ any update on speed estimation data.
+
+ For example
+ 'Conns/s Pkts/s Pkts/s Bytes/s Bytes/s'
+ those data in /proc/net/ip_vs_stats will always be zero.
+ Note, this only affect the speed estimation, the total data
+ will still be updated.
+
+ You can always re-enable estimation by setting this value to 1.
+ But be carefull, the first estimation after re-enable is not
+ accurate.
diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h
index 7cb5a1aace40..dba2102ec316 100644
--- a/include/net/ip_vs.h
+++ b/include/net/ip_vs.h
@@ -931,6 +931,7 @@ struct netns_ipvs {
int sysctl_conn_reuse_mode;
int sysctl_schedule_icmp;
int sysctl_ignore_tunneled;
+ int sysctl_run_estimation;
/* ip_vs_lblc */
int sysctl_lblc_expiration;
@@ -1071,6 +1072,11 @@ static inline int sysctl_cache_bypass(struct netns_ipvs *ipvs)
return ipvs->sysctl_cache_bypass;
}
+static inline int sysctl_run_estimation(struct netns_ipvs *ipvs)
+{
+ return ipvs->sysctl_run_estimation;
+}
+
#else
static inline int sysctl_sync_threshold(struct netns_ipvs *ipvs)
@@ -1650,6 +1656,12 @@ static inline int ip_vs_confirm_conntrack(struct sk_buff *skb)
static inline void ip_vs_conn_drop_conntrack(struct ip_vs_conn *cp)
{
}
+
+static inline int sysctl_run_estimation(struct netns_ipvs *ipvs)
+{
+ return 1;
+}
+
#endif /* CONFIG_IP_VS_NFCT */
/* Using old conntrack that can not be redirected to another real server? */
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index c25097092a06..cbea5a68afb5 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -2017,6 +2017,12 @@ static struct ctl_table vs_vars[] = {
.mode = 0644,
.proc_handler = proc_dointvec,
},
+ {
+ .procname = "run_estimation",
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec,
+ },
#ifdef CONFIG_IP_VS_DEBUG
{
.procname = "debug_level",
@@ -4090,6 +4096,8 @@ static int __net_init ip_vs_control_net_init_sysctl(struct netns_ipvs *ipvs)
tbl[idx++].data = &ipvs->sysctl_conn_reuse_mode;
tbl[idx++].data = &ipvs->sysctl_schedule_icmp;
tbl[idx++].data = &ipvs->sysctl_ignore_tunneled;
+ ipvs->sysctl_run_estimation = 1;
+ tbl[idx++].data = &ipvs->sysctl_run_estimation;
ipvs->sysctl_hdr = register_net_sysctl(net, "net/ipv4/vs", tbl);
if (ipvs->sysctl_hdr == NULL) {
diff --git a/net/netfilter/ipvs/ip_vs_est.c b/net/netfilter/ipvs/ip_vs_est.c
index 05b8112ffb37..9a1a7af6a186 100644
--- a/net/netfilter/ipvs/ip_vs_est.c
+++ b/net/netfilter/ipvs/ip_vs_est.c
@@ -100,6 +100,9 @@ static void estimation_timer(struct timer_list *t)
u64 rate;
struct netns_ipvs *ipvs = from_timer(ipvs, t, est_timer);
+ if (!sysctl_run_estimation(ipvs))
+ goto skip;
+
spin_lock(&ipvs->est_lock);
list_for_each_entry(e, &ipvs->est_list, list) {
s = container_of(e, struct ip_vs_stats, est);
@@ -131,6 +134,8 @@ static void estimation_timer(struct timer_list *t)
spin_unlock(&s->lock);
}
spin_unlock(&ipvs->est_lock);
+
+skip:
mod_timer(&ipvs->est_timer, jiffies + 2*HZ);
}
--
2.19.1.3.ge56e4f7
next reply other threads:[~2021-08-19 4:52 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-19 4:51 Dust Li [this message]
2021-08-19 8:23 ` [PATCH net-next v2] net: ipvs: add sysctl_run_estimation to support disable estimation kernel test robot
2021-08-19 8:41 ` dust.li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210819045137.35447-1-dust.li@linux.alibaba.com \
--to=dust.li@linux.alibaba.com \
--cc=horms@verge.net.au \
--cc=ja@ssi.bg \
--cc=lvs-devel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=wensong@linux-vs.org \
--cc=xintian1976@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox