[PATCH iproute2-next v2 00/19] bridge: vlan: add global multicast options

[Nikolay Aleksandrov <razor@blackwall.org>]

From: Nikolay Aleksandrov <nikolay@nvidia.com>

Hi all,
This set adds support for vlan multicast options. The feature is
globally controlled by a new bridge option called mcast_vlan_snooping
which is added by patch 01. Then patches 2-5 add support for dumping
global vlan options and filtering on vlan id. Patch 06 adds support for
setting global vlan options and then patches 07-18 add all the new
global vlan options, finally patch 19 adds support for dumping vlan
multicast router ports. These options are identical in meaning, names and
functionality as the bridge-wide ones.

All the new vlan global commands are under the global keyword:
 $ bridge vlan global show [ vid VID dev DEVICE ]
 $ bridge vlan global set vid VID dev DEVICE ...

I've added command examples in each commit message. The patch-set is a
bit bigger but the global options follow the same pattern so I don't see
a point in breaking them. All man page descriptions have been taken from
the same current bridge-wide mcast options. The only additional iproute2
change which is left to do is the per-vlan mcast router control which
I'll send separately. Note to properly use this set you'll need the
updated kernel headers where mcast router was moved from a global option
to per-vlan/per-device one (changed uapi enum which was in net-next).

Example:
 # enable vlan mcast snooping globally
 $ ip link set dev bridge type bridge mcast_vlan_snooping 1
 # enable mcast querier on vlan 100
 $ bridge vlan global set dev bridge vid 100 mcast_querier 1
 # show vlan 100's global options
 $ bridge -s vlan global show vid 100
port              vlan-id
bridge            100
                    mcast_snooping 1 mcast_querier 1 mcast_igmp_version 2 mcast_mld_version 1 mcast_last_member_count 2 mcast_last_member_interval 100 mcast_startup_query_count 2 mcast_startup_query_interval 3125 mcast_membership_interval 26000 mcast_querier_interval 25500 mcast_query_interval 12500 mcast_query_response_interval 1000

A following kernel patch-set will add selftests which use these commands.

v2: all patches use strcmp instead of matches
    patches 02, 03 which prepare print_vlan_rtm for global show are new
    previous patch 02 is split in patches 02, 03 and 04
    patches 07-18 have their help msg alignment adjusted to fit in 100
    characters

Thanks,
 Nik


Nikolay Aleksandrov (19):
  ip: bridge: add support for mcast_vlan_snooping
  bridge: vlan: factor out vlan option printing
  bridge: vlan: skip unknown attributes when printing options
  bridge: vlan: add support to show global vlan options
  bridge: vlan: add support for vlan filtering when dumping options
  bridge: vlan: add support to set global vlan options
  bridge: vlan: add global mcast_snooping option
  bridge: vlan: add global mcast_igmp_version option
  bridge: vlan: add global mcast_mld_version option
  bridge: vlan: add global mcast_last_member_count option
  bridge: vlan: add global mcast_startup_query_count option
  bridge: vlan: add global mcast_last_member_interval option
  bridge: vlan: add global mcast_membership_interval option
  bridge: vlan: add global mcast_querier_interval option
  bridge: vlan: add global mcast_query_interval option
  bridge: vlan: add global mcast_query_response_interval option
  bridge: vlan: add global mcast_startup_query_interval option
  bridge: vlan: add global mcast_querier option
  bridge: vlan: add support for dumping router ports

 bridge/br_common.h    |   4 +-
 bridge/mdb.c          |   6 +-
 bridge/monitor.c      |   2 +-
 bridge/vlan.c         | 547 +++++++++++++++++++++++++++++++++++++-----
 ip/iplink_bridge.c    |  29 +++
 man/man8/bridge.8     | 130 ++++++++++
 man/man8/ip-link.8.in |   8 +
 7 files changed, 660 insertions(+), 66 deletions(-)

-- 
2.31.1