Re: [PATCH] net: stmmac: fix MAC not working when system resume back with WoL enabled

[Vladimir Oltean <olteanv@gmail.com>]

On Wed, Sep 01, 2021 at 05:02:28PM +0800, Joakim Zhang wrote:
> We can reproduce this issue with below steps:
> 1) enable WoL on the host
> 2) host system suspended
> 3) remote client send out wakeup packets
> We can see that host system resume back, but can't work, such as ping failed.
> 
> After a bit digging, this issue is introduced by the commit 46f69ded988d
> ("net: stmmac: Use resolved link config in mac_link_up()"), which use
> the finalised link parameters in mac_link_up() rather than the
> parameters in mac_config().
> 
> There are two scenarios for MAC suspend/resume:
> 
> 1) MAC suspend with WoL disabled, stmmac_suspend() call
> phylink_mac_change() to notify phylink machine that a change in MAC
> state, then .mac_link_down callback would be invoked. Further, it will
> call phylink_stop() to stop the phylink instance. When MAC resume back,
> firstly phylink_start() is called to start the phylink instance, then
> call phylink_mac_change() which will finally trigger phylink machine to
> invoke .mac_config and .mac_link_up callback. All is fine since
> configuration in these two callbacks will be initialized.
> 
> 2) MAC suspend with WoL enabled, phylink_mac_change() will put link
> down, but there is no phylink_stop() to stop the phylink instance, so it
> will link up again, that means .mac_config and .mac_link_up would be
> invoked before system suspended. After system resume back, it will do
> DMA initialization and SW reset which let MAC lost the hardware setting
> (i.e MAC_Configuration register(offset 0x0) is reset). Since link is up
> before system suspended, so .mac_link_up would not be invoked after
> system resume back, lead to there is no chance to initialize the
> configuration in .mac_link_up callback, as a result, MAC can't work any
> longer.

Have you tried putting phylink_stop in .suspend, and phylink_start in .resume?

> 
> Above description is what I found when debug this issue, this patch is
> just revert broken patch to workaround it, at least make MAC work when
> system resume back with WoL enabled.
> 
> Said this is a workaround, since it has not resolve the issue completely.
> I just move the speed/duplex/pause etc into .mac_config callback, there are
> other configurations in .mac_link_up callback which also need to be
> initialized to work for specific functions.
> 
> Fixes: 46f69ded988d ("net: stmmac: Use resolved link config in mac_link_up()")
> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
> ---
> 
> Broken patch cannot be reverted directly, so manually modified it.
> 
> I also tried to fix in other ways, but failed to find a better solution,
> any suggestions would be appreciated. Thanks.
> 
> Joakim

Do you know exactly why it used to work prior to this patch?