[PATCH AUTOSEL 5.10 131/176] rtl8xxxu: Fix the handling of TX A-MPDU aggregation

[Sasha Levin <sashal@kernel.org>]

From: Chris Chiu <chris.chiu@canonical.com>

[ Upstream commit 95a581ab3592082c60a08090aabe09ac7d0bd650 ]

The TX A-MPDU aggregation is not handled in the driver since the
ieee80211_start_tx_ba_session has never been started properly.
Start and stop the TX BA session by tracking the TX aggregation
status of each TID. Fix the ampdu_action and the tx descriptor
accordingly with the given TID.

Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210804151325.86600-1-chris.chiu@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/realtek/rtl8xxxu/rtl8xxxu.h  |  2 ++
 .../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 33 ++++++++++++++-----
 2 files changed, 26 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
index acb6b0cd3667..b28fa0c4d180 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
@@ -1378,6 +1378,8 @@ struct rtl8xxxu_priv {
 	u8 no_pape:1;
 	u8 int_buf[USB_INTR_CONTENT_LENGTH];
 	u8 rssi_level;
+	DECLARE_BITMAP(tx_aggr_started, IEEE80211_NUM_TIDS);
+	DECLARE_BITMAP(tid_tx_operational, IEEE80211_NUM_TIDS);
 	/*
 	 * Only one virtual interface permitted because only STA mode
 	 * is supported and no iface_combinations are provided.
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 5cd7ef3625c5..0d374a294840 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -4805,6 +4805,8 @@ rtl8xxxu_fill_txdesc_v1(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
 	struct ieee80211_rate *tx_rate = ieee80211_get_tx_rate(hw, tx_info);
 	struct rtl8xxxu_priv *priv = hw->priv;
 	struct device *dev = &priv->udev->dev;
+	u8 *qc = ieee80211_get_qos_ctl(hdr);
+	u8 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
 	u32 rate;
 	u16 rate_flags = tx_info->control.rates[0].flags;
 	u16 seq_number;
@@ -4828,7 +4830,7 @@ rtl8xxxu_fill_txdesc_v1(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
 
 	tx_desc->txdw3 = cpu_to_le32((u32)seq_number << TXDESC32_SEQ_SHIFT);
 
-	if (ampdu_enable)
+	if (ampdu_enable && test_bit(tid, priv->tid_tx_operational))
 		tx_desc->txdw1 |= cpu_to_le32(TXDESC32_AGG_ENABLE);
 	else
 		tx_desc->txdw1 |= cpu_to_le32(TXDESC32_AGG_BREAK);
@@ -4876,6 +4878,8 @@ rtl8xxxu_fill_txdesc_v2(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
 	struct rtl8xxxu_priv *priv = hw->priv;
 	struct device *dev = &priv->udev->dev;
 	struct rtl8xxxu_txdesc40 *tx_desc40;
+	u8 *qc = ieee80211_get_qos_ctl(hdr);
+	u8 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
 	u32 rate;
 	u16 rate_flags = tx_info->control.rates[0].flags;
 	u16 seq_number;
@@ -4902,7 +4906,7 @@ rtl8xxxu_fill_txdesc_v2(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
 
 	tx_desc40->txdw9 = cpu_to_le32((u32)seq_number << TXDESC40_SEQ_SHIFT);
 
-	if (ampdu_enable)
+	if (ampdu_enable && test_bit(tid, priv->tid_tx_operational))
 		tx_desc40->txdw2 |= cpu_to_le32(TXDESC40_AGG_ENABLE);
 	else
 		tx_desc40->txdw2 |= cpu_to_le32(TXDESC40_AGG_BREAK);
@@ -5015,12 +5019,19 @@ static void rtl8xxxu_tx(struct ieee80211_hw *hw,
 	if (ieee80211_is_data_qos(hdr->frame_control) && sta) {
 		if (sta->ht_cap.ht_supported) {
 			u32 ampdu, val32;
+			u8 *qc = ieee80211_get_qos_ctl(hdr);
+			u8 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
 
 			ampdu = (u32)sta->ht_cap.ampdu_density;
 			val32 = ampdu << TXDESC_AMPDU_DENSITY_SHIFT;
 			tx_desc->txdw2 |= cpu_to_le32(val32);
 
 			ampdu_enable = true;
+
+			if (!test_bit(tid, priv->tx_aggr_started) &&
+			    !(skb->protocol == cpu_to_be16(ETH_P_PAE)))
+				if (!ieee80211_start_tx_ba_session(sta, tid, 0))
+					set_bit(tid, priv->tx_aggr_started);
 		}
 	}
 
@@ -6095,6 +6106,7 @@ rtl8xxxu_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 	struct device *dev = &priv->udev->dev;
 	u8 ampdu_factor, ampdu_density;
 	struct ieee80211_sta *sta = params->sta;
+	u16 tid = params->tid;
 	enum ieee80211_ampdu_mlme_action action = params->action;
 
 	switch (action) {
@@ -6107,17 +6119,20 @@ rtl8xxxu_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 		dev_dbg(dev,
 			"Changed HT: ampdu_factor %02x, ampdu_density %02x\n",
 			ampdu_factor, ampdu_density);
-		break;
+		return IEEE80211_AMPDU_TX_START_IMMEDIATE;
+	case IEEE80211_AMPDU_TX_STOP_CONT:
 	case IEEE80211_AMPDU_TX_STOP_FLUSH:
-		dev_dbg(dev, "%s: IEEE80211_AMPDU_TX_STOP_FLUSH\n", __func__);
-		rtl8xxxu_set_ampdu_factor(priv, 0);
-		rtl8xxxu_set_ampdu_min_space(priv, 0);
-		break;
 	case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT:
-		dev_dbg(dev, "%s: IEEE80211_AMPDU_TX_STOP_FLUSH_CONT\n",
-			 __func__);
+		dev_dbg(dev, "%s: IEEE80211_AMPDU_TX_STOP\n", __func__);
 		rtl8xxxu_set_ampdu_factor(priv, 0);
 		rtl8xxxu_set_ampdu_min_space(priv, 0);
+		clear_bit(tid, priv->tx_aggr_started);
+		clear_bit(tid, priv->tid_tx_operational);
+		ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
+		break;
+	case IEEE80211_AMPDU_TX_OPERATIONAL:
+		dev_dbg(dev, "%s: IEEE80211_AMPDU_TX_OPERATIONAL\n", __func__);
+		set_bit(tid, priv->tid_tx_operational);
 		break;
 	case IEEE80211_AMPDU_RX_START:
 		dev_dbg(dev, "%s: IEEE80211_AMPDU_RX_START\n", __func__);
-- 
2.30.2