[PATCH AUTOSEL 4.14 07/59] netlink: Deal with ESRCH error in nlmsg_notify()

[PATCH AUTOSEL 4.14 07/59] netlink: Deal with ESRCH error in nlmsg_notify()

[Sasha Levin]

From: Yajun Deng <yajun.deng@linux.dev>

[ Upstream commit fef773fc8110d8124c73a5e6610f89e52814637d ]

Yonghong Song report:
The bpf selftest tc_bpf failed with latest bpf-next.
The following is the command to run and the result:
$ ./test_progs -n 132
[   40.947571] bpf_testmod: loading out-of-tree module taints kernel.
test_tc_bpf:PASS:test_tc_bpf__open_and_load 0 nsec
test_tc_bpf:PASS:bpf_tc_hook_create(BPF_TC_INGRESS) 0 nsec
test_tc_bpf:PASS:bpf_tc_hook_create invalid hook.attach_point 0 nsec
test_tc_bpf_basic:PASS:bpf_obj_get_info_by_fd 0 nsec
test_tc_bpf_basic:PASS:bpf_tc_attach 0 nsec
test_tc_bpf_basic:PASS:handle set 0 nsec
test_tc_bpf_basic:PASS:priority set 0 nsec
test_tc_bpf_basic:PASS:prog_id set 0 nsec
test_tc_bpf_basic:PASS:bpf_tc_attach replace mode 0 nsec
test_tc_bpf_basic:PASS:bpf_tc_query 0 nsec
test_tc_bpf_basic:PASS:handle set 0 nsec
test_tc_bpf_basic:PASS:priority set 0 nsec
test_tc_bpf_basic:PASS:prog_id set 0 nsec
libbpf: Kernel error message: Failed to send filter delete notification
test_tc_bpf_basic:FAIL:bpf_tc_detach unexpected error: -3 (errno 3)
test_tc_bpf:FAIL:test_tc_internal ingress unexpected error: -3 (errno 3)

The failure seems due to the commit
    cfdf0d9ae75b ("rtnetlink: use nlmsg_notify() in rtnetlink_send()")

Deal with ESRCH error in nlmsg_notify() even the report variable is zero.

Reported-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Link: https://lore.kernel.org/r/20210719051816.11762-1-yajun.deng@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netlink/af_netlink.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index 140bec3568ec..955041c54702 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -2476,13 +2476,15 @@ int nlmsg_notify(struct sock *sk, struct sk_buff *skb, u32 portid,
 		/* errors reported via destination sk->sk_err, but propagate
 		 * delivery errors if NETLINK_BROADCAST_ERROR flag is set */
 		err = nlmsg_multicast(sk, skb, exclude_portid, group, flags);
+		if (err == -ESRCH)
+			err = 0;
 	}
 
 	if (report) {
 		int err2;
 
 		err2 = nlmsg_unicast(sk, skb, portid);
-		if (!err || err == -ESRCH)
+		if (!err)
 			err = err2;
 	}
 
-- 
2.30.2

[PATCH AUTOSEL 4.14 15/59] bpf/tests: Fix copy-and-paste error in double word test

[Sasha Levin]

From: Johan Almbladh <johan.almbladh@anyfinetworks.com>

[ Upstream commit ae7f47041d928b1a2f28717d095b4153c63cbf6a ]

This test now operates on DW as stated instead of W, which was
already covered by another test.

Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210721104058.3755254-1-johan.almbladh@anyfinetworks.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/test_bpf.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/lib/test_bpf.c b/lib/test_bpf.c
index 75ebf2bbc2ee..4aa88ba8238c 100644
--- a/lib/test_bpf.c
+++ b/lib/test_bpf.c
@@ -4395,8 +4395,8 @@ static struct bpf_test tests[] = {
 		.u.insns_int = {
 			BPF_LD_IMM64(R0, 0),
 			BPF_LD_IMM64(R1, 0xffffffffffffffffLL),
-			BPF_STX_MEM(BPF_W, R10, R1, -40),
-			BPF_LDX_MEM(BPF_W, R0, R10, -40),
+			BPF_STX_MEM(BPF_DW, R10, R1, -40),
+			BPF_LDX_MEM(BPF_DW, R0, R10, -40),
 			BPF_EXIT_INSN(),
 		},
 		INTERNAL,
-- 
2.30.2

[PATCH AUTOSEL 4.14 16/59] bpf/tests: Do not PASS tests without actually testing the result

[Sasha Levin]

From: Johan Almbladh <johan.almbladh@anyfinetworks.com>

[ Upstream commit 2b7e9f25e590726cca76700ebdb10e92a7a72ca1 ]

Each test case can have a set of sub-tests, where each sub-test can
run the cBPF/eBPF test snippet with its own data_size and expected
result. Before, the end of the sub-test array was indicated by both
data_size and result being zero. However, most or all of the internal
eBPF tests has a data_size of zero already. When such a test also had
an expected value of zero, the test was never run but reported as
PASS anyway.

Now the test runner always runs the first sub-test, regardless of the
data_size and result values. The sub-test array zero-termination only
applies for any additional sub-tests.

There are other ways fix it of course, but this solution at least
removes the surprise of eBPF tests with a zero result always succeeding.

Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210721103822.3755111-1-johan.almbladh@anyfinetworks.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/test_bpf.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/lib/test_bpf.c b/lib/test_bpf.c
index 4aa88ba8238c..9a8f957ad86e 100644
--- a/lib/test_bpf.c
+++ b/lib/test_bpf.c
@@ -6306,7 +6306,14 @@ static int run_one(const struct bpf_prog *fp, struct bpf_test *test)
 		u64 duration;
 		u32 ret;
 
-		if (test->test[i].data_size == 0 &&
+		/*
+		 * NOTE: Several sub-tests may be present, in which case
+		 * a zero {data_size, result} tuple indicates the end of
+		 * the sub-test array. The first test is always run,
+		 * even if both data_size and result happen to be zero.
+		 */
+		if (i > 0 &&
+		    test->test[i].data_size == 0 &&
 		    test->test[i].result == 0)
 			break;
 
-- 
2.30.2

[PATCH AUTOSEL 4.14 20/59] ipv4: ip_output.c: Fix out-of-bounds warning in ip_copy_addrs()

[Sasha Levin]

From: "Gustavo A. R. Silva" <gustavoars@kernel.org>

[ Upstream commit 6321c7acb82872ef6576c520b0e178eaad3a25c0 ]

Fix the following out-of-bounds warning:

    In function 'ip_copy_addrs',
        inlined from '__ip_queue_xmit' at net/ipv4/ip_output.c:517:2:
net/ipv4/ip_output.c:449:2: warning: 'memcpy' offset [40, 43] from the object at 'fl' is out of the bounds of referenced subobject 'saddr' with type 'unsigned int' at offset 36 [-Warray-bounds]
      449 |  memcpy(&iph->saddr, &fl4->saddr,
          |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      450 |         sizeof(fl4->saddr) + sizeof(fl4->daddr));
          |         ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The problem is that the original code is trying to copy data into a
couple of struct members adjacent to each other in a single call to
memcpy(). This causes a legitimate compiler warning because memcpy()
overruns the length of &iph->saddr and &fl4->saddr. As these are just
a couple of struct members, fix this by using direct assignments,
instead of memcpy().

This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().

Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/d5ae2e65-1f18-2577-246f-bada7eee6ccd@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/ip_output.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index 5ec185a9dcab..c9f82525bfa4 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -419,8 +419,9 @@ static void ip_copy_addrs(struct iphdr *iph, const struct flowi4 *fl4)
 {
 	BUILD_BUG_ON(offsetof(typeof(*fl4), daddr) !=
 		     offsetof(typeof(*fl4), saddr) + sizeof(fl4->saddr));
-	memcpy(&iph->saddr, &fl4->saddr,
-	       sizeof(fl4->saddr) + sizeof(fl4->daddr));
+
+	iph->saddr = fl4->saddr;
+	iph->daddr = fl4->daddr;
 }
 
 /* Note: skb->sk can be different from sk, in case of tunnels */
-- 
2.30.2

[PATCH AUTOSEL 4.14 21/59] flow_dissector: Fix out-of-bounds warnings

[Sasha Levin]

From: "Gustavo A. R. Silva" <gustavoars@kernel.org>

[ Upstream commit 323e0cb473e2a8706ff162b6b4f4fa16023c9ba7 ]

Fix the following out-of-bounds warnings:

    net/core/flow_dissector.c: In function '__skb_flow_dissect':
>> net/core/flow_dissector.c:1104:4: warning: 'memcpy' offset [24, 39] from the object at '<unknown>' is out of the bounds of referenced subobject 'saddr' with type 'struct in6_addr' at offset 8 [-Warray-bounds]
     1104 |    memcpy(&key_addrs->v6addrs, &iph->saddr,
          |    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
     1105 |           sizeof(key_addrs->v6addrs));
          |           ~~~~~~~~~~~~~~~~~~~~~~~~~~~
    In file included from include/linux/ipv6.h:5,
                     from net/core/flow_dissector.c:6:
    include/uapi/linux/ipv6.h:133:18: note: subobject 'saddr' declared here
      133 |  struct in6_addr saddr;
          |                  ^~~~~
>> net/core/flow_dissector.c:1059:4: warning: 'memcpy' offset [16, 19] from the object at '<unknown>' is out of the bounds of referenced subobject 'saddr' with type 'unsigned int' at offset 12 [-Warray-bounds]
     1059 |    memcpy(&key_addrs->v4addrs, &iph->saddr,
          |    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
     1060 |           sizeof(key_addrs->v4addrs));
          |           ~~~~~~~~~~~~~~~~~~~~~~~~~~~
    In file included from include/linux/ip.h:17,
                     from net/core/flow_dissector.c:5:
    include/uapi/linux/ip.h:103:9: note: subobject 'saddr' declared here
      103 |  __be32 saddr;
          |         ^~~~~

The problem is that the original code is trying to copy data into a
couple of struct members adjacent to each other in a single call to
memcpy().  So, the compiler legitimately complains about it. As these
are just a couple of members, fix this by copying each one of them in
separate calls to memcpy().

This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().

Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/d5ae2e65-1f18-2577-246f-bada7eee6ccd@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/flow_dissector.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/net/core/flow_dissector.c b/net/core/flow_dissector.c
index 071de3013364..b4dddb685fc2 100644
--- a/net/core/flow_dissector.c
+++ b/net/core/flow_dissector.c
@@ -514,8 +514,10 @@ bool __skb_flow_dissect(const struct sk_buff *skb,
 							      FLOW_DISSECTOR_KEY_IPV4_ADDRS,
 							      target_container);
 
-			memcpy(&key_addrs->v4addrs, &iph->saddr,
-			       sizeof(key_addrs->v4addrs));
+			memcpy(&key_addrs->v4addrs.src, &iph->saddr,
+			       sizeof(key_addrs->v4addrs.src));
+			memcpy(&key_addrs->v4addrs.dst, &iph->daddr,
+			       sizeof(key_addrs->v4addrs.dst));
 			key_control->addr_type = FLOW_DISSECTOR_KEY_IPV4_ADDRS;
 		}
 
@@ -564,8 +566,10 @@ bool __skb_flow_dissect(const struct sk_buff *skb,
 							      FLOW_DISSECTOR_KEY_IPV6_ADDRS,
 							      target_container);
 
-			memcpy(&key_addrs->v6addrs, &iph->saddr,
-			       sizeof(key_addrs->v6addrs));
+			memcpy(&key_addrs->v6addrs.src, &iph->saddr,
+			       sizeof(key_addrs->v6addrs.src));
+			memcpy(&key_addrs->v6addrs.dst, &iph->daddr,
+			       sizeof(key_addrs->v6addrs.dst));
 			key_control->addr_type = FLOW_DISSECTOR_KEY_IPV6_ADDRS;
 		}
 
-- 
2.30.2

[PATCH AUTOSEL 4.14 29/59] Bluetooth: skip invalid hci_sync_conn_complete_evt

[Sasha Levin]

From: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>

[ Upstream commit 92fe24a7db751b80925214ede43f8d2be792ea7b ]

Syzbot reported a corrupted list in kobject_add_internal [1]. This
happens when multiple HCI_EV_SYNC_CONN_COMPLETE event packets with
status 0 are sent for the same HCI connection. This causes us to
register the device more than once which corrupts the kset list.

As this is forbidden behavior, we add a check for whether we're
trying to process the same HCI_EV_SYNC_CONN_COMPLETE event multiple
times for one connection. If that's the case, the event is invalid, so
we report an error that the device is misbehaving, and ignore the
packet.

Link: https://syzkaller.appspot.com/bug?extid=66264bf2fd0476be7e6c [1]
Reported-by: syzbot+66264bf2fd0476be7e6c@syzkaller.appspotmail.com
Tested-by: syzbot+66264bf2fd0476be7e6c@syzkaller.appspotmail.com
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_event.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index b3253f2e11af..5186f199d892 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -3761,6 +3761,21 @@ static void hci_sync_conn_complete_evt(struct hci_dev *hdev,
 
 	switch (ev->status) {
 	case 0x00:
+		/* The synchronous connection complete event should only be
+		 * sent once per new connection. Receiving a successful
+		 * complete event when the connection status is already
+		 * BT_CONNECTED means that the device is misbehaving and sent
+		 * multiple complete event packets for the same new connection.
+		 *
+		 * Registering the device more than once can corrupt kernel
+		 * memory, hence upon detecting this invalid event, we report
+		 * an error and ignore the packet.
+		 */
+		if (conn->state == BT_CONNECTED) {
+			bt_dev_err(hdev, "Ignoring connect complete event for existing connection");
+			goto unlock;
+		}
+
 		conn->handle = __le16_to_cpu(ev->handle);
 		conn->state  = BT_CONNECTED;
 		conn->type   = ev->link_type;
-- 
2.30.2

[PATCH AUTOSEL 4.14 31/59] bpf: Fix off-by-one in tail call count limiting

[Sasha Levin]

From: Johan Almbladh <johan.almbladh@anyfinetworks.com>

[ Upstream commit b61a28cf11d61f512172e673b8f8c4a6c789b425 ]

Before, the interpreter allowed up to MAX_TAIL_CALL_CNT + 1 tail calls.
Now precisely MAX_TAIL_CALL_CNT is allowed, which is in line with the
behavior of the x86 JITs.

Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210728164741.350370-1-johan.almbladh@anyfinetworks.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c
index e7211b0fa27c..1d19f4fa7f44 100644
--- a/kernel/bpf/core.c
+++ b/kernel/bpf/core.c
@@ -1095,7 +1095,7 @@ static unsigned int ___bpf_prog_run(u64 *regs, const struct bpf_insn *insn,
 
 		if (unlikely(index >= array->map.max_entries))
 			goto out;
-		if (unlikely(tail_call_cnt > MAX_TAIL_CALL_CNT))
+		if (unlikely(tail_call_cnt >= MAX_TAIL_CALL_CNT))
 			goto out;
 
 		tail_call_cnt++;
-- 
2.30.2

[PATCH AUTOSEL 4.14 34/59] net: ethernet: stmmac: Do not use unreachable() in ipq806x_gmac_probe()

[Sasha Levin]

From: Nathan Chancellor <nathan@kernel.org>

[ Upstream commit 4367355dd90942a71641c98c40c74589c9bddf90 ]

When compiling with clang in certain configurations, an objtool warning
appears:

drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.o: warning: objtool:
ipq806x_gmac_probe() falls through to next function phy_modes()

This happens because the unreachable annotation in the third switch
statement is not eliminated. The compiler should know that the first
default case would prevent the second and third from being reached as
the comment notes but sanitizer options can make it harder for the
compiler to reason this out.

Help the compiler out by eliminating the unreachable() annotation and
unifying the default case error handling so that there is no objtool
warning, the meaning of the code stays the same, and there is less
duplication.

Reported-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../ethernet/stmicro/stmmac/dwmac-ipq806x.c    | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
index f4ff43a1b5ba..d8c40b68bc96 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
@@ -300,10 +300,7 @@ static int ipq806x_gmac_probe(struct platform_device *pdev)
 		val &= ~NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL;
 		break;
 	default:
-		dev_err(&pdev->dev, "Unsupported PHY mode: \"%s\"\n",
-			phy_modes(gmac->phy_mode));
-		err = -EINVAL;
-		goto err_remove_config_dt;
+		goto err_unsupported_phy;
 	}
 	regmap_write(gmac->nss_common, NSS_COMMON_GMAC_CTL(gmac->id), val);
 
@@ -320,10 +317,7 @@ static int ipq806x_gmac_probe(struct platform_device *pdev)
 			NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id);
 		break;
 	default:
-		dev_err(&pdev->dev, "Unsupported PHY mode: \"%s\"\n",
-			phy_modes(gmac->phy_mode));
-		err = -EINVAL;
-		goto err_remove_config_dt;
+		goto err_unsupported_phy;
 	}
 	regmap_write(gmac->nss_common, NSS_COMMON_CLK_SRC_CTRL, val);
 
@@ -340,8 +334,7 @@ static int ipq806x_gmac_probe(struct platform_device *pdev)
 				NSS_COMMON_CLK_GATE_GMII_TX_EN(gmac->id);
 		break;
 	default:
-		/* We don't get here; the switch above will have errored out */
-		unreachable();
+		goto err_unsupported_phy;
 	}
 	regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);
 
@@ -372,6 +365,11 @@ static int ipq806x_gmac_probe(struct platform_device *pdev)
 
 	return 0;
 
+err_unsupported_phy:
+	dev_err(&pdev->dev, "Unsupported PHY mode: \"%s\"\n",
+		phy_modes(gmac->phy_mode));
+	err = -EINVAL;
+
 err_remove_config_dt:
 	stmmac_remove_config_dt(pdev, plat_dat);
 
-- 
2.30.2

[PATCH AUTOSEL 4.14 35/59] Bluetooth: avoid circular locks in sco_sock_connect

[Sasha Levin]

From: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>

[ Upstream commit 734bc5ff783115aa3164f4e9dd5967ae78e0a8ab ]

In a future patch, calls to bh_lock_sock in sco.c should be replaced
by lock_sock now that none of the functions are run in IRQ context.

However, doing so results in a circular locking dependency:

======================================================
WARNING: possible circular locking dependency detected
5.14.0-rc4-syzkaller #0 Not tainted
------------------------------------------------------
syz-executor.2/14867 is trying to acquire lock:
ffff88803e3c1120 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at:
lock_sock include/net/sock.h:1613 [inline]
ffff88803e3c1120 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at:
sco_conn_del+0x12a/0x2a0 net/bluetooth/sco.c:191

but task is already holding lock:
ffffffff8d2dc7c8 (hci_cb_list_lock){+.+.}-{3:3}, at:
hci_disconn_cfm include/net/bluetooth/hci_core.h:1497 [inline]
ffffffff8d2dc7c8 (hci_cb_list_lock){+.+.}-{3:3}, at:
hci_conn_hash_flush+0xda/0x260 net/bluetooth/hci_conn.c:1608

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 (hci_cb_list_lock){+.+.}-{3:3}:
       __mutex_lock_common kernel/locking/mutex.c:959 [inline]
       __mutex_lock+0x12a/0x10a0 kernel/locking/mutex.c:1104
       hci_connect_cfm include/net/bluetooth/hci_core.h:1482 [inline]
       hci_remote_features_evt net/bluetooth/hci_event.c:3263 [inline]
       hci_event_packet+0x2f4d/0x7c50 net/bluetooth/hci_event.c:6240
       hci_rx_work+0x4f8/0xd30 net/bluetooth/hci_core.c:5122
       process_one_work+0x98d/0x1630 kernel/workqueue.c:2276
       worker_thread+0x658/0x11f0 kernel/workqueue.c:2422
       kthread+0x3e5/0x4d0 kernel/kthread.c:319
       ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295

-> #1 (&hdev->lock){+.+.}-{3:3}:
       __mutex_lock_common kernel/locking/mutex.c:959 [inline]
       __mutex_lock+0x12a/0x10a0 kernel/locking/mutex.c:1104
       sco_connect net/bluetooth/sco.c:245 [inline]
       sco_sock_connect+0x227/0xa10 net/bluetooth/sco.c:601
       __sys_connect_file+0x155/0x1a0 net/socket.c:1879
       __sys_connect+0x161/0x190 net/socket.c:1896
       __do_sys_connect net/socket.c:1906 [inline]
       __se_sys_connect net/socket.c:1903 [inline]
       __x64_sys_connect+0x6f/0xb0 net/socket.c:1903
       do_syscall_x64 arch/x86/entry/common.c:50 [inline]
       do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
       entry_SYSCALL_64_after_hwframe+0x44/0xae

-> #0 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}:
       check_prev_add kernel/locking/lockdep.c:3051 [inline]
       check_prevs_add kernel/locking/lockdep.c:3174 [inline]
       validate_chain kernel/locking/lockdep.c:3789 [inline]
       __lock_acquire+0x2a07/0x54a0 kernel/locking/lockdep.c:5015
       lock_acquire kernel/locking/lockdep.c:5625 [inline]
       lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5590
       lock_sock_nested+0xca/0x120 net/core/sock.c:3170
       lock_sock include/net/sock.h:1613 [inline]
       sco_conn_del+0x12a/0x2a0 net/bluetooth/sco.c:191
       sco_disconn_cfm+0x71/0xb0 net/bluetooth/sco.c:1202
       hci_disconn_cfm include/net/bluetooth/hci_core.h:1500 [inline]
       hci_conn_hash_flush+0x127/0x260 net/bluetooth/hci_conn.c:1608
       hci_dev_do_close+0x528/0x1130 net/bluetooth/hci_core.c:1778
       hci_unregister_dev+0x1c0/0x5a0 net/bluetooth/hci_core.c:4015
       vhci_release+0x70/0xe0 drivers/bluetooth/hci_vhci.c:340
       __fput+0x288/0x920 fs/file_table.c:280
       task_work_run+0xdd/0x1a0 kernel/task_work.c:164
       exit_task_work include/linux/task_work.h:32 [inline]
       do_exit+0xbd4/0x2a60 kernel/exit.c:825
       do_group_exit+0x125/0x310 kernel/exit.c:922
       get_signal+0x47f/0x2160 kernel/signal.c:2808
       arch_do_signal_or_restart+0x2a9/0x1c40 arch/x86/kernel/signal.c:865
       handle_signal_work kernel/entry/common.c:148 [inline]
       exit_to_user_mode_loop kernel/entry/common.c:172 [inline]
       exit_to_user_mode_prepare+0x17d/0x290 kernel/entry/common.c:209
       __syscall_exit_to_user_mode_work kernel/entry/common.c:291 [inline]
       syscall_exit_to_user_mode+0x19/0x60 kernel/entry/common.c:302
       ret_from_fork+0x15/0x30 arch/x86/entry/entry_64.S:288

other info that might help us debug this:

Chain exists of:
  sk_lock-AF_BLUETOOTH-BTPROTO_SCO --> &hdev->lock --> hci_cb_list_lock

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(hci_cb_list_lock);
                               lock(&hdev->lock);
                               lock(hci_cb_list_lock);
  lock(sk_lock-AF_BLUETOOTH-BTPROTO_SCO);

 *** DEADLOCK ***

The issue is that the lock hierarchy should go from &hdev->lock -->
hci_cb_list_lock --> sk_lock-AF_BLUETOOTH-BTPROTO_SCO. For example,
one such call trace is:

  hci_dev_do_close():
    hci_dev_lock();
    hci_conn_hash_flush():
      hci_disconn_cfm():
        mutex_lock(&hci_cb_list_lock);
        sco_disconn_cfm():
        sco_conn_del():
          lock_sock(sk);

However, in sco_sock_connect, we call lock_sock before calling
hci_dev_lock inside sco_connect, thus inverting the lock hierarchy.

We fix this by pulling the call to hci_dev_lock out from sco_connect.

Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/sco.c | 39 ++++++++++++++++-----------------------
 1 file changed, 16 insertions(+), 23 deletions(-)

diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index 2d23b29ce00d..3c3837e0016e 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -211,44 +211,32 @@ static int sco_chan_add(struct sco_conn *conn, struct sock *sk,
 	return err;
 }
 
-static int sco_connect(struct sock *sk)
+static int sco_connect(struct hci_dev *hdev, struct sock *sk)
 {
 	struct sco_conn *conn;
 	struct hci_conn *hcon;
-	struct hci_dev  *hdev;
 	int err, type;
 
 	BT_DBG("%pMR -> %pMR", &sco_pi(sk)->src, &sco_pi(sk)->dst);
 
-	hdev = hci_get_route(&sco_pi(sk)->dst, &sco_pi(sk)->src, BDADDR_BREDR);
-	if (!hdev)
-		return -EHOSTUNREACH;
-
-	hci_dev_lock(hdev);
-
 	if (lmp_esco_capable(hdev) && !disable_esco)
 		type = ESCO_LINK;
 	else
 		type = SCO_LINK;
 
 	if (sco_pi(sk)->setting == BT_VOICE_TRANSPARENT &&
-	    (!lmp_transp_capable(hdev) || !lmp_esco_capable(hdev))) {
-		err = -EOPNOTSUPP;
-		goto done;
-	}
+	    (!lmp_transp_capable(hdev) || !lmp_esco_capable(hdev)))
+		return -EOPNOTSUPP;
 
 	hcon = hci_connect_sco(hdev, type, &sco_pi(sk)->dst,
 			       sco_pi(sk)->setting);
-	if (IS_ERR(hcon)) {
-		err = PTR_ERR(hcon);
-		goto done;
-	}
+	if (IS_ERR(hcon))
+		return PTR_ERR(hcon);
 
 	conn = sco_conn_add(hcon);
 	if (!conn) {
 		hci_conn_drop(hcon);
-		err = -ENOMEM;
-		goto done;
+		return -ENOMEM;
 	}
 
 	/* Update source addr of the socket */
@@ -256,7 +244,7 @@ static int sco_connect(struct sock *sk)
 
 	err = sco_chan_add(conn, sk, NULL);
 	if (err)
-		goto done;
+		return err;
 
 	if (hcon->state == BT_CONNECTED) {
 		sco_sock_clear_timer(sk);
@@ -266,9 +254,6 @@ static int sco_connect(struct sock *sk)
 		sco_sock_set_timer(sk, sk->sk_sndtimeo);
 	}
 
-done:
-	hci_dev_unlock(hdev);
-	hci_dev_put(hdev);
 	return err;
 }
 
@@ -554,6 +539,7 @@ static int sco_sock_connect(struct socket *sock, struct sockaddr *addr, int alen
 {
 	struct sockaddr_sco *sa = (struct sockaddr_sco *) addr;
 	struct sock *sk = sock->sk;
+	struct hci_dev  *hdev;
 	int err;
 
 	BT_DBG("sk %p", sk);
@@ -568,12 +554,19 @@ static int sco_sock_connect(struct socket *sock, struct sockaddr *addr, int alen
 	if (sk->sk_type != SOCK_SEQPACKET)
 		return -EINVAL;
 
+	hdev = hci_get_route(&sa->sco_bdaddr, &sco_pi(sk)->src, BDADDR_BREDR);
+	if (!hdev)
+		return -EHOSTUNREACH;
+	hci_dev_lock(hdev);
+
 	lock_sock(sk);
 
 	/* Set destination address and psm */
 	bacpy(&sco_pi(sk)->dst, &sa->sco_bdaddr);
 
-	err = sco_connect(sk);
+	err = sco_connect(hdev, sk);
+	hci_dev_unlock(hdev);
+	hci_dev_put(hdev);
 	if (err)
 		goto done;
 
-- 
2.30.2

[PATCH AUTOSEL 4.14 39/59] rpc: fix gss_svc_init cleanup on failure

[Sasha Levin]

From: "J. Bruce Fields" <bfields@redhat.com>

[ Upstream commit 5a4753446253a427c0ff1e433b9c4933e5af207c ]

The failure case here should be rare, but it's obviously wrong.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/auth_gss/svcauth_gss.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/sunrpc/auth_gss/svcauth_gss.c b/net/sunrpc/auth_gss/svcauth_gss.c
index 27dfd85830d8..4f41a1bc59bf 100644
--- a/net/sunrpc/auth_gss/svcauth_gss.c
+++ b/net/sunrpc/auth_gss/svcauth_gss.c
@@ -1861,7 +1861,7 @@ gss_svc_init_net(struct net *net)
 		goto out2;
 	return 0;
 out2:
-	destroy_use_gss_proxy_proc_entry(net);
+	rsi_cache_destroy_net(net);
 out1:
 	rsc_cache_destroy_net(net);
 	return rv;
-- 
2.30.2

[PATCH AUTOSEL 4.14 47/59] selftests/bpf: Enlarge select() timeout for test_maps

[Sasha Levin]

From: Li Zhijian <lizhijian@cn.fujitsu.com>

[ Upstream commit 2d82d73da35b72b53fe0d96350a2b8d929d07e42 ]

0Day robot observed that it's easily timeout on a heavy load host.
-------------------
 # selftests: bpf: test_maps
 # Fork 1024 tasks to 'test_update_delete'
 # Fork 1024 tasks to 'test_update_delete'
 # Fork 100 tasks to 'test_hashmap'
 # Fork 100 tasks to 'test_hashmap_percpu'
 # Fork 100 tasks to 'test_hashmap_sizes'
 # Fork 100 tasks to 'test_hashmap_walk'
 # Fork 100 tasks to 'test_arraymap'
 # Fork 100 tasks to 'test_arraymap_percpu'
 # Failed sockmap unexpected timeout
 not ok 3 selftests: bpf: test_maps # exit=1
 # selftests: bpf: test_lru_map
 # nr_cpus:8
-------------------
Since this test will be scheduled by 0Day to a random host that could have
only a few cpus(2-8), enlarge the timeout to avoid a false NG report.

In practice, i tried to pin it to only one cpu by 'taskset 0x01 ./test_maps',
and knew 10S is likely enough, but i still perfer to a larger value 30.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210820015556.23276-2-lizhijian@cn.fujitsu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/test_maps.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/bpf/test_maps.c b/tools/testing/selftests/bpf/test_maps.c
index 96c6238a4a1f..3f503ad37a2b 100644
--- a/tools/testing/selftests/bpf/test_maps.c
+++ b/tools/testing/selftests/bpf/test_maps.c
@@ -730,7 +730,7 @@ static void test_sockmap(int tasks, void *data)
 
 		FD_ZERO(&w);
 		FD_SET(sfd[3], &w);
-		to.tv_sec = 1;
+		to.tv_sec = 30;
 		to.tv_usec = 0;
 		s = select(sfd[3] + 1, &w, NULL, NULL, &to);
 		if (s == -1) {
-- 
2.30.2

[PATCH AUTOSEL 4.14 56/59] ath9k: fix OOB read ar9300_eeprom_restore_internal

[Sasha Levin]

From: Zekun Shen <bruceshenzk@gmail.com>

[ Upstream commit 23151b9ae79e3bc4f6a0c4cd3a7f355f68dad128 ]

Bad header can have large length field which can cause OOB.
cptr is the last bytes for read, and the eeprom is parsed
from high to low address. The OOB, triggered by the condition
length > cptr could cause memory error with a read on
negative index.

There are some sanity check around length, but it is not
compared with cptr (the remaining bytes). Here, the
corrupted/bad EEPROM can cause panic.

I was able to reproduce the crash, but I cannot find the
log and the reproducer now. After I applied the patch, the
bug is no longer reproducible.

Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YM3xKsQJ0Hw2hjrc@Zekuns-MBP-16.fios-router.home
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 76385834a7de..694a58b1e995 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -3346,7 +3346,8 @@ static int ar9300_eeprom_restore_internal(struct ath_hw *ah,
 			"Found block at %x: code=%d ref=%d length=%d major=%d minor=%d\n",
 			cptr, code, reference, length, major, minor);
 		if ((!AR_SREV_9485(ah) && length >= 1024) ||
-		    (AR_SREV_9485(ah) && length > EEPROM_DATA_LEN_9485)) {
+		    (AR_SREV_9485(ah) && length > EEPROM_DATA_LEN_9485) ||
+		    (length > cptr)) {
 			ath_dbg(common, EEPROM, "Skipping bad header\n");
 			cptr -= COMP_HDR_LEN;
 			continue;
-- 
2.30.2

[PATCH AUTOSEL 4.14 57/59] ath9k: fix sleeping in atomic context

[Sasha Levin]

From: Miaoqing Pan <miaoqing@codeaurora.org>

[ Upstream commit 7c48662b9d56666219f526a71ace8c15e6e12f1f ]

The problem is that gpio_free() can sleep and the cfg_soc() can be
called with spinlocks held. One problematic call tree is:

--> ath_reset_internal() takes &sc->sc_pcu_lock spin lock
   --> ath9k_hw_reset()
      --> ath9k_hw_gpio_request_in()
         --> ath9k_hw_gpio_request()
            --> ath9k_hw_gpio_cfg_soc()

Remove gpio_free(), use error message instead, so we should make sure
there is no GPIO conflict.

Also remove ath9k_hw_gpio_free() from ath9k_hw_apply_gpio_override(),
as gpio_mask will never be set for SOC chips.

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1628481916-15030-1-git-send-email-miaoqing@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/hw.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 933d4f49d6b0..9e3db55a8684 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1595,7 +1595,6 @@ static void ath9k_hw_apply_gpio_override(struct ath_hw *ah)
 		ath9k_hw_gpio_request_out(ah, i, NULL,
 					  AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
 		ath9k_hw_set_gpio(ah, i, !!(ah->gpio_val & BIT(i)));
-		ath9k_hw_gpio_free(ah, i);
 	}
 }
 
@@ -2702,14 +2701,17 @@ static void ath9k_hw_gpio_cfg_output_mux(struct ath_hw *ah, u32 gpio, u32 type)
 static void ath9k_hw_gpio_cfg_soc(struct ath_hw *ah, u32 gpio, bool out,
 				  const char *label)
 {
+	int err;
+
 	if (ah->caps.gpio_requested & BIT(gpio))
 		return;
 
-	/* may be requested by BSP, free anyway */
-	gpio_free(gpio);
-
-	if (gpio_request_one(gpio, out ? GPIOF_OUT_INIT_LOW : GPIOF_IN, label))
+	err = gpio_request_one(gpio, out ? GPIOF_OUT_INIT_LOW : GPIOF_IN, label);
+	if (err) {
+		ath_err(ath9k_hw_common(ah), "request GPIO%d failed:%d\n",
+			gpio, err);
 		return;
+	}
 
 	ah->caps.gpio_requested |= BIT(gpio);
 }
-- 
2.30.2

[PATCH AUTOSEL 4.14 58/59] net: fix NULL pointer reference in cipso_v4_doi_free

[Sasha Levin]

From: 王贇 <yun.wang@linux.alibaba.com>

[ Upstream commit 733c99ee8be9a1410287cdbb943887365e83b2d6 ]

In netlbl_cipsov4_add_std() when 'doi_def->map.std' alloc
failed, we sometime observe panic:

  BUG: kernel NULL pointer dereference, address:
  ...
  RIP: 0010:cipso_v4_doi_free+0x3a/0x80
  ...
  Call Trace:
   netlbl_cipsov4_add_std+0xf4/0x8c0
   netlbl_cipsov4_add+0x13f/0x1b0
   genl_family_rcv_msg_doit.isra.15+0x132/0x170
   genl_rcv_msg+0x125/0x240

This is because in cipso_v4_doi_free() there is no check
on 'doi_def->map.std' when 'doi_def->type' equal 1, which
is possibe, since netlbl_cipsov4_add_std() haven't initialize
it before alloc 'doi_def->map.std'.

This patch just add the check to prevent panic happen for similar
cases.

Reported-by: Abaci <abaci@linux.alibaba.com>
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netlabel/netlabel_cipso_v4.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/netlabel/netlabel_cipso_v4.c b/net/netlabel/netlabel_cipso_v4.c
index 3e3494c8d42f..28eda7a5267d 100644
--- a/net/netlabel/netlabel_cipso_v4.c
+++ b/net/netlabel/netlabel_cipso_v4.c
@@ -156,8 +156,8 @@ static int netlbl_cipsov4_add_std(struct genl_info *info,
 		return -ENOMEM;
 	doi_def->map.std = kzalloc(sizeof(*doi_def->map.std), GFP_KERNEL);
 	if (doi_def->map.std == NULL) {
-		ret_val = -ENOMEM;
-		goto add_std_failure;
+		kfree(doi_def);
+		return -ENOMEM;
 	}
 	doi_def->type = CIPSO_V4_MAP_TRANS;
 
-- 
2.30.2

[PATCH AUTOSEL 4.14 59/59] net: w5100: check return value after calling platform_get_resource()

[Sasha Levin]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit a39ff4a47f3e1da3b036817ef436b1a9be10783a ]

It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/wiznet/w5100.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/wiznet/w5100.c b/drivers/net/ethernet/wiznet/w5100.c
index 2bdfb39215e9..87610d8b3462 100644
--- a/drivers/net/ethernet/wiznet/w5100.c
+++ b/drivers/net/ethernet/wiznet/w5100.c
@@ -1059,6 +1059,8 @@ static int w5100_mmio_probe(struct platform_device *pdev)
 		mac_addr = data->mac_addr;
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem)
+		return -EINVAL;
 	if (resource_size(mem) < W5100_BUS_DIRECT_SIZE)
 		ops = &w5100_mmio_indirect_ops;
 	else
-- 
2.30.2