netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jonathan Lemon <jonathan.lemon@gmail.com>
To: kuba@kernel.org, davem@davemloft.net, richardcochran@gmail.com
Cc: netdev@vger.kernel.org, kernel-team@fb.com
Subject: [PATCH net-next 14/18] ptp: ocp: Add second GNSS device
Date: Tue, 14 Sep 2021 19:16:32 -0700	[thread overview]
Message-ID: <20210915021636.153754-15-jonathan.lemon@gmail.com> (raw)
In-Reply-To: <20210915021636.153754-1-jonathan.lemon@gmail.com>

Upcoming boards may have a second GNSS receiver, getting information
from a different constellation than the first receiver, which provides
some measure of anti-spoofing.

Expose the sysfs attribute for this device, if detected.

Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
---
 drivers/ptp/ptp_ocp.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/ptp/ptp_ocp.c b/drivers/ptp/ptp_ocp.c
index 74b5561fbdae..d0e3096f53f6 100644
--- a/drivers/ptp/ptp_ocp.c
+++ b/drivers/ptp/ptp_ocp.c
@@ -232,6 +232,7 @@ struct ptp_ocp {
 	int			id;
 	int			n_irqs;
 	int			gnss_port;
+	int			gnss2_port;
 	int			mac_port;	/* miniature atomic clock */
 	int			nmea_port;
 	u8			serial[6];
@@ -286,8 +287,8 @@ static int ptp_ocp_ts_enable(void *priv, bool enable);
  * 0: N/C
  * 1: TS0
  * 2: TS1
- * 3: GPS
- * 4: GPS2 (n/c)
+ * 3: GNSS
+ * 4: GNSS2
  * 5: MAC
  * 6: TS2
  * 7: I2C controller
@@ -384,6 +385,10 @@ static struct ocp_resource ocp_fb_resource[] = {
 		OCP_SERIAL_RESOURCE(gnss_port),
 		.offset = 0x00160000 + 0x1000, .irq_vec = 3,
 	},
+	{
+		OCP_SERIAL_RESOURCE(gnss2_port),
+		.offset = 0x00170000 + 0x1000, .irq_vec = 4,
+	},
 	{
 		OCP_SERIAL_RESOURCE(mac_port),
 		.offset = 0x00180000 + 0x1000, .irq_vec = 5,
@@ -2100,6 +2105,7 @@ ptp_ocp_device_init(struct ptp_ocp *bp, struct pci_dev *pdev)
 	bp->ptp_info = ptp_ocp_clock_info;
 	spin_lock_init(&bp->lock);
 	bp->gnss_port = -1;
+	bp->gnss2_port = -1;
 	bp->mac_port = -1;
 	bp->nmea_port = -1;
 	bp->pdev = pdev;
@@ -2163,6 +2169,10 @@ ptp_ocp_complete(struct ptp_ocp *bp)
 		sprintf(buf, "ttyS%d", bp->gnss_port);
 		ptp_ocp_link_child(bp, buf, "ttyGNSS");
 	}
+	if (bp->gnss2_port != -1) {
+		sprintf(buf, "ttyS%d", bp->gnss2_port);
+		ptp_ocp_link_child(bp, buf, "ttyGNSS2");
+	}
 	if (bp->mac_port != -1) {
 		sprintf(buf, "ttyS%d", bp->mac_port);
 		ptp_ocp_link_child(bp, buf, "ttyMAC");
@@ -2241,6 +2251,7 @@ ptp_ocp_info(struct ptp_ocp *bp)
 				 ver >> 16);
 	}
 	ptp_ocp_serial_info(dev, "GNSS", bp->gnss_port, 115200);
+	ptp_ocp_serial_info(dev, "GNSS2", bp->gnss2_port, 115200);
 	ptp_ocp_serial_info(dev, "MAC", bp->mac_port, 57600);
 	if (bp->nmea_out && bp->nmea_port != -1) {
 		int baud = -1;
@@ -2281,6 +2292,8 @@ ptp_ocp_detach(struct ptp_ocp *bp)
 		ptp_ocp_unregister_ext(bp->pps);
 	if (bp->gnss_port != -1)
 		serial8250_unregister_port(bp->gnss_port);
+	if (bp->gnss2_port != -1)
+		serial8250_unregister_port(bp->gnss2_port);
 	if (bp->mac_port != -1)
 		serial8250_unregister_port(bp->mac_port);
 	if (bp->nmea_port != -1)
-- 
2.31.1


  parent reply	other threads:[~2021-09-15  2:17 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-15  2:16 [PATCH net-next 00/18] timecard updates for v13 firmware Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 01/18] ptp: ocp: parameterize the i2c driver used Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 02/18] ptp: ocp: Parameterize the TOD information display Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 03/18] ptp: ocp: Skip I2C flash read when there is no controller Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 04/18] ptp: ocp: Skip resources with out of range irqs Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 05/18] ptp: ocp: Report error if resource registration fails Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 06/18] ptp: ocp: Add third timestamper Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 07/18] ptp: ocp: Add SMA selector and controls Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 08/18] ptp: ocp: Add IRIG-B and DCF blocks Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 09/18] ptp: ocp: Add IRIG-B output mode control Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 10/18] ptp: ocp: Add sysfs attribute utc_tai_offset Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 11/18] ptp: ocp: Separate the init and info logic Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 12/18] ptp: ocp: Add debugfs entry for timecard Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 13/18] ptp: ocp: Add NMEA output Jonathan Lemon
2021-09-15  2:16 ` Jonathan Lemon [this message]
2021-09-15  2:16 ` [PATCH net-next 15/18] ptp: ocp: Enable 4th timestamper / PPS generator Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 16/18] ptp: ocp: Have FPGA fold in ns adjustment for adjtime Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 17/18] ptp: ocp: Add timestamp window adjustment Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 18/18] docs: ABI: Add sysfs documentation for timecard Jonathan Lemon
2021-09-15 10:30 ` [PATCH net-next 00/18] timecard updates for v13 firmware patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210915021636.153754-15-jonathan.lemon@gmail.com \
    --to=jonathan.lemon@gmail.com \
    --cc=davem@davemloft.net \
    --cc=kernel-team@fb.com \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=richardcochran@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).