netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jonathan Lemon <jonathan.lemon@gmail.com>
To: kuba@kernel.org, davem@davemloft.net, richardcochran@gmail.com
Cc: netdev@vger.kernel.org, kernel-team@fb.com
Subject: [PATCH net-next 16/18] ptp: ocp: Have FPGA fold in ns adjustment for adjtime.
Date: Tue, 14 Sep 2021 19:16:34 -0700	[thread overview]
Message-ID: <20210915021636.153754-17-jonathan.lemon@gmail.com> (raw)
In-Reply-To: <20210915021636.153754-1-jonathan.lemon@gmail.com>

The current implementation of adjtime uses gettime/settime to
perform nanosecond adjustments.  This introduces addtional phase
errors due to delays.

Instead, use the FPGA's ability to just apply the nanosecond
adjustment to the clock directly.

Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
---
 drivers/ptp/ptp_ocp.c | 40 +++++++++++++++++++++++++---------------
 1 file changed, 25 insertions(+), 15 deletions(-)

diff --git a/drivers/ptp/ptp_ocp.c b/drivers/ptp/ptp_ocp.c
index be8ab727a4ef..e6779a712bbb 100644
--- a/drivers/ptp/ptp_ocp.c
+++ b/drivers/ptp/ptp_ocp.c
@@ -594,9 +594,6 @@ ptp_ocp_settime(struct ptp_clock_info *ptp_info, const struct timespec64 *ts)
 	struct ptp_ocp *bp = container_of(ptp_info, struct ptp_ocp, ptp_info);
 	unsigned long flags;
 
-	if (ioread32(&bp->reg->status) & OCP_STATUS_IN_SYNC)
-		return 0;
-
 	spin_lock_irqsave(&bp->lock, flags);
 	__ptp_ocp_settime_locked(bp, ts);
 	spin_unlock_irqrestore(&bp->lock, flags);
@@ -604,26 +601,39 @@ ptp_ocp_settime(struct ptp_clock_info *ptp_info, const struct timespec64 *ts)
 	return 0;
 }
 
+static void
+__ptp_ocp_adjtime_locked(struct ptp_ocp *bp, u64 adj_val)
+{
+	u32 select, ctrl;
+
+	select = ioread32(&bp->reg->select);
+	iowrite32(OCP_SELECT_CLK_REG, &bp->reg->select);
+
+	iowrite32(adj_val, &bp->reg->offset_ns);
+	iowrite32(adj_val & 0x7f, &bp->reg->offset_window_ns);
+
+	ctrl = OCP_CTRL_ADJUST_OFFSET | OCP_CTRL_ENABLE;
+	iowrite32(ctrl, &bp->reg->ctrl);
+
+	/* restore clock selection */
+	iowrite32(select >> 16, &bp->reg->select);
+}
+
 static int
 ptp_ocp_adjtime(struct ptp_clock_info *ptp_info, s64 delta_ns)
 {
 	struct ptp_ocp *bp = container_of(ptp_info, struct ptp_ocp, ptp_info);
-	struct timespec64 ts;
 	unsigned long flags;
-	int err;
+	u32 adj_ns, sign;
 
-	if (ioread32(&bp->reg->status) & OCP_STATUS_IN_SYNC)
-		return 0;
+	sign = delta_ns < 0 ? BIT(31) : 0;
+	adj_ns = sign ? -delta_ns : delta_ns;
 
 	spin_lock_irqsave(&bp->lock, flags);
-	err = __ptp_ocp_gettime_locked(bp, &ts, NULL);
-	if (likely(!err)) {
-		timespec64_add_ns(&ts, delta_ns);
-		__ptp_ocp_settime_locked(bp, &ts);
-	}
+	__ptp_ocp_adjtime_locked(bp, sign | adj_ns);
 	spin_unlock_irqrestore(&bp->lock, flags);
 
-	return err;
+	return 0;
 }
 
 static int
@@ -636,7 +646,7 @@ ptp_ocp_null_adjfine(struct ptp_clock_info *ptp_info, long scaled_ppm)
 }
 
 static int
-ptp_ocp_adjphase(struct ptp_clock_info *ptp_info, s32 phase_ns)
+ptp_ocp_null_adjphase(struct ptp_clock_info *ptp_info, s32 phase_ns)
 {
 	return -EOPNOTSUPP;
 }
@@ -699,7 +709,7 @@ static const struct ptp_clock_info ptp_ocp_clock_info = {
 	.settime64	= ptp_ocp_settime,
 	.adjtime	= ptp_ocp_adjtime,
 	.adjfine	= ptp_ocp_null_adjfine,
-	.adjphase	= ptp_ocp_adjphase,
+	.adjphase	= ptp_ocp_null_adjphase,
 	.enable		= ptp_ocp_enable,
 	.pps		= true,
 	.n_ext_ts	= 4,
-- 
2.31.1


  parent reply	other threads:[~2021-09-15  2:17 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-15  2:16 [PATCH net-next 00/18] timecard updates for v13 firmware Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 01/18] ptp: ocp: parameterize the i2c driver used Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 02/18] ptp: ocp: Parameterize the TOD information display Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 03/18] ptp: ocp: Skip I2C flash read when there is no controller Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 04/18] ptp: ocp: Skip resources with out of range irqs Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 05/18] ptp: ocp: Report error if resource registration fails Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 06/18] ptp: ocp: Add third timestamper Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 07/18] ptp: ocp: Add SMA selector and controls Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 08/18] ptp: ocp: Add IRIG-B and DCF blocks Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 09/18] ptp: ocp: Add IRIG-B output mode control Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 10/18] ptp: ocp: Add sysfs attribute utc_tai_offset Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 11/18] ptp: ocp: Separate the init and info logic Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 12/18] ptp: ocp: Add debugfs entry for timecard Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 13/18] ptp: ocp: Add NMEA output Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 14/18] ptp: ocp: Add second GNSS device Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 15/18] ptp: ocp: Enable 4th timestamper / PPS generator Jonathan Lemon
2021-09-15  2:16 ` Jonathan Lemon [this message]
2021-09-15  2:16 ` [PATCH net-next 17/18] ptp: ocp: Add timestamp window adjustment Jonathan Lemon
2021-09-15  2:16 ` [PATCH net-next 18/18] docs: ABI: Add sysfs documentation for timecard Jonathan Lemon
2021-09-15 10:30 ` [PATCH net-next 00/18] timecard updates for v13 firmware patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210915021636.153754-17-jonathan.lemon@gmail.com \
    --to=jonathan.lemon@gmail.com \
    --cc=davem@davemloft.net \
    --cc=kernel-team@fb.com \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=richardcochran@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).