[PATCH net-next 2/4] net: dsa: b53: Drop BCM5301x workaround for a wrong CPU/IMP port

["Rafał Miłecki" <zajec5@gmail.com>]

From: Rafał Miłecki <rafal@milecki.pl>

On BCM5301x port 8 requires a fixed link when used.

Years ago when b53 was an OpenWrt downstream driver (with configuration
based on sometimes bugged NVRAM) there was a need for a fixup. In case
of forcing fixed link for (incorrectly specified) port 5 the code had to
actually setup port 8 link.

For upstream b53 driver with setup based on DT there is no need for that
workaround. In DT we have and require correct ports setup.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
 drivers/net/dsa/b53/b53_common.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 47a00c5364c7..ca84e32baca0 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1291,12 +1291,6 @@ static void b53_adjust_link(struct dsa_switch *ds, int port,
 				return;
 			}
 		}
-	} else if (is5301x(dev)) {
-		if (port != dev->cpu_port) {
-			b53_force_port_config(dev, dev->cpu_port, 2000,
-					      DUPLEX_FULL, true, true);
-			b53_force_link(dev, dev->cpu_port, 1);
-		}
 	}
 
 	/* Re-negotiate EEE if it was enabled already */
-- 
2.26.2