From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 5156BC433EF for ; Fri, 15 Oct 2021 23:01:15 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 23F4D60FC3 for ; Fri, 15 Oct 2021 23:01:15 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S243432AbhJOXDU (ORCPT ); Fri, 15 Oct 2021 19:03:20 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:60544 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S243422AbhJOXDT (ORCPT ); Fri, 15 Oct 2021 19:03:19 -0400 Received: from mail-ed1-x535.google.com (mail-ed1-x535.google.com [IPv6:2a00:1450:4864:20::535]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 93B4DC061570; Fri, 15 Oct 2021 16:01:12 -0700 (PDT) Received: by mail-ed1-x535.google.com with SMTP id y12so45374615eda.4; Fri, 15 Oct 2021 16:01:12 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20210112; h=from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=T4LRxAmbFnflH89t7OJtpK+BQEdtR46vgXDNxjLPMWU=; b=Y9WTtoiXiSsSWyIAWeO3FssHPSkqyF3GnQexcuagjyW84NFoky0YLr09dK3/Fw3x1b //DBLwyGlrOA1Fcg2o/mNhQ1hKE5LLSyjzhlRCEqwK0SDX5ISLbvsv0OdQR8ni0Eb0Ro TXa2DjrRnf+XNmpshxJO4cti3KEudQSLfK79bjw9jzf4qyIv5OaBGWUikk3Oz457nKSC rXRIZZSzkeWfpin9xA0cbCy3Jz5jfonO7nM5DaNAhV5ygodXKHdFjTH1Kz9E4/Xw1oJI Xwg7xeRHib9WmItnidrP1dG3px5biJTEZD4W/YwfiN6ge4GIFTdHysaBtRxg8otI5SYk ndyA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=T4LRxAmbFnflH89t7OJtpK+BQEdtR46vgXDNxjLPMWU=; b=sExcf8lAFHTNG/TsI9CpGozoOU5BOahxQszU/jy0LpMtwN3xRbIm4PQMpDsFCyYmzM QcuzSbsvYr+fnxdVfAVFzJ7j9+V8lFn7PIyZVfS/yik5gwj8aqXlA89VrYjB0ZouNg+M fT1s2SxLUPAQRuRS+8WZnyHuDuHC9JR3JJvKycUXWG3M87sJKWzYrN5C5Dwy4IFqML9a IyXa6mO0GfX0dKf74sv08Uo4LRFdUIBt8d0k90DUUL4YDKGrxEqRHi6TssznVKMj1Qvg d83wuSslDKlfDxcxi3MxHAhtA1uWqbFLX/x7Ge3kkYWXg9dbSQ2MkJXzJgJwUqHjYq1q jzFQ== X-Gm-Message-State: AOAM533pnWt9AMs32nnFP2rUg2Bpfmu54hoA67T+6BDSZGuw3fYG+oG3 +ZEZLMegf7xuJT5wbuy4kHFV52/filo= X-Google-Smtp-Source: ABdhPJzIrWLtY+giAi17VaQkRdkdMHiZXWZ5wjZE86tw8qEYUHkxsAqqCsgGSZ6Cmty1XEYoHKlTFw== X-Received: by 2002:a17:906:9554:: with SMTP id g20mr9846761ejy.173.1634338870403; Fri, 15 Oct 2021 16:01:10 -0700 (PDT) Received: from Ansuel-xps.localdomain (93-42-71-246.ip85.fastwebnet.it. [93.42.71.246]) by smtp.googlemail.com with ESMTPSA id oz11sm4836496ejc.72.2021.10.15.16.01.09 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 15 Oct 2021 16:01:09 -0700 (PDT) From: Ansuel Smith To: Andrew Lunn , Vivien Didelot , Florian Fainelli , Vladimir Oltean , "David S. Miller" , Jakub Kicinski , netdev@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Ansuel Smith Subject: [PATCH] net: dsa: qca8k: tidy for loop in setup and add cpu port check Date: Sat, 16 Oct 2021 00:58:32 +0200 Message-Id: <20211015225832.14824-1-ansuelsmth@gmail.com> X-Mailer: git-send-email 2.32.0 MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org Tidy and organize qca8k setup function from multiple for loop. Change for loop in bridge leave/join to scan all port and skip cpu port. No functional change intended. Signed-off-by: Ansuel Smith --- drivers/net/dsa/qca8k.c | 74 ++++++++++++++++++++++++----------------- 1 file changed, 44 insertions(+), 30 deletions(-) diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c index 2b0aadb0114c..ba0411d4c5ae 100644 --- a/drivers/net/dsa/qca8k.c +++ b/drivers/net/dsa/qca8k.c @@ -1122,28 +1122,34 @@ qca8k_setup(struct dsa_switch *ds) if (ret) dev_warn(priv->dev, "mib init failed"); - /* Enable QCA header mode on the cpu port */ - ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(cpu_port), - QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_TX_S | - QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_RX_S); - if (ret) { - dev_err(priv->dev, "failed enabling QCA header mode"); - return ret; - } - - /* Disable forwarding by default on all ports */ + /* Initial setup of all ports */ for (i = 0; i < QCA8K_NUM_PORTS; i++) { + /* Disable forwarding by default on all ports */ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i), QCA8K_PORT_LOOKUP_MEMBER, 0); if (ret) return ret; - } - /* Disable MAC by default on all ports */ - for (i = 1; i < QCA8K_NUM_PORTS; i++) - qca8k_port_set_status(priv, i, 0); + /* Enable QCA header mode on all cpu ports */ + if (dsa_is_cpu_port(ds, i)) { + ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(i), + QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_TX_S | + QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_RX_S); + if (ret) { + dev_err(priv->dev, "failed enabling QCA header mode"); + return ret; + } + } - /* Forward all unknown frames to CPU port for Linux processing */ + /* Disable MAC by default on all user ports */ + if (dsa_is_user_port(ds, i)) + qca8k_port_set_status(priv, i, 0); + } + + /* Forward all unknown frames to CPU port for Linux processing + * Notice that in multi-cpu config only one port should be set + * for igmp, unknown, multicast and broadcast packet + */ ret = qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1, BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S | BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_BC_DP_S | @@ -1152,11 +1158,13 @@ qca8k_setup(struct dsa_switch *ds) if (ret) return ret; - /* Setup connection between CPU port & user ports */ + /* Setup connection between CPU port & user ports + * Configure specific switch configuration for ports + */ for (i = 0; i < QCA8K_NUM_PORTS; i++) { /* CPU port gets connected to all user ports of the switch */ if (dsa_is_cpu_port(ds, i)) { - ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(cpu_port), + ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i), QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds)); if (ret) return ret; @@ -1193,16 +1201,14 @@ qca8k_setup(struct dsa_switch *ds) if (ret) return ret; } - } - /* The port 5 of the qca8337 have some problem in flood condition. The - * original legacy driver had some specific buffer and priority settings - * for the different port suggested by the QCA switch team. Add this - * missing settings to improve switch stability under load condition. - * This problem is limited to qca8337 and other qca8k switch are not affected. - */ - if (priv->switch_id == QCA8K_ID_QCA8337) { - for (i = 0; i < QCA8K_NUM_PORTS; i++) { + /* The port 5 of the qca8337 have some problem in flood condition. The + * original legacy driver had some specific buffer and priority settings + * for the different port suggested by the QCA switch team. Add this + * missing settings to improve switch stability under load condition. + * This problem is limited to qca8337 and other qca8k switch are not affected. + */ + if (priv->switch_id == QCA8K_ID_QCA8337) { switch (i) { /* The 2 CPU port and port 5 requires some different * priority than any other ports. @@ -1238,6 +1244,12 @@ qca8k_setup(struct dsa_switch *ds) QCA8K_PORT_HOL_CTRL1_WRED_EN, mask); } + + /* Set initial MTU for every port. + * We have only have a general MTU setting. So track + * every port and set the max across all port. + */ + priv->port_mtu[i] = ETH_FRAME_LEN + ETH_FCS_LEN; } /* Special GLOBAL_FC_THRESH value are needed for ar8327 switch */ @@ -1251,8 +1263,6 @@ qca8k_setup(struct dsa_switch *ds) } /* Setup our port MTUs to match power on defaults */ - for (i = 0; i < QCA8K_NUM_PORTS; i++) - priv->port_mtu[i] = ETH_FRAME_LEN + ETH_FCS_LEN; ret = qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, ETH_FRAME_LEN + ETH_FCS_LEN); if (ret) dev_warn(priv->dev, "failed setting MTU settings"); @@ -1728,7 +1738,9 @@ qca8k_port_bridge_join(struct dsa_switch *ds, int port, struct net_device *br) cpu_port = dsa_to_port(ds, port)->cpu_dp->index; port_mask = BIT(cpu_port); - for (i = 1; i < QCA8K_NUM_PORTS; i++) { + for (i = 0; i < QCA8K_NUM_PORTS; i++) { + if (dsa_is_cpu_port(ds, i)) + continue; if (dsa_to_port(ds, i)->bridge_dev != br) continue; /* Add this port to the portvlan mask of the other ports @@ -1758,7 +1770,9 @@ qca8k_port_bridge_leave(struct dsa_switch *ds, int port, struct net_device *br) cpu_port = dsa_to_port(ds, port)->cpu_dp->index; - for (i = 1; i < QCA8K_NUM_PORTS; i++) { + for (i = 0; i < QCA8K_NUM_PORTS; i++) { + if (dsa_is_cpu_port(ds, i)) + continue; if (dsa_to_port(ds, i)->bridge_dev != br) continue; /* Remove this port to the portvlan mask of the other ports -- 2.32.0