netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Luo Jie <luoj@codeaurora.org>
To: andrew@lunn.ch, hkallweit1@gmail.com, linux@armlinux.org.uk,
	davem@davemloft.net, kuba@kernel.org
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	sricharan@codeaurora.org, Luo Jie <luoj@codeaurora.org>
Subject: [PATCH v7 12/14] net: phy: add qca8081 soft_reset and enable master/slave seed
Date: Sun, 24 Oct 2021 16:27:36 +0800	[thread overview]
Message-ID: <20211024082738.849-13-luoj@codeaurora.org> (raw)
In-Reply-To: <20211024082738.849-1-luoj@codeaurora.org>

qca8081 phy is a single port phy, configure
phy the lower seed value to make it linked as slave
mode easier.

Signed-off-by: Luo Jie <luoj@codeaurora.org>
---
 drivers/net/phy/at803x.c | 48 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index da710523b7c4..1418db4f2091 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -223,6 +223,12 @@
 #define QCA808X_PHY_MMD3_DEBUG_6		0xa011
 #define QCA808X_MMD3_DEBUG_6_VALUE		0x5f85
 
+/* master/slave seed config */
+#define QCA808X_PHY_DEBUG_LOCAL_SEED		9
+#define QCA808X_MASTER_SLAVE_SEED_ENABLE	BIT(1)
+#define QCA808X_MASTER_SLAVE_SEED_CFG		GENMASK(12, 2)
+#define QCA808X_MASTER_SLAVE_SEED_RANGE		0x32
+
 MODULE_DESCRIPTION("Qualcomm Atheros AR803x and QCA808X PHY driver");
 MODULE_AUTHOR("Matus Ujhelyi");
 MODULE_LICENSE("GPL");
@@ -1569,6 +1575,26 @@ static int qca808x_phy_fast_retrain_config(struct phy_device *phydev)
 	return 0;
 }
 
+static int qca808x_phy_ms_random_seed_set(struct phy_device *phydev)
+{
+	u16 seed_value = (prandom_u32() % QCA808X_MASTER_SLAVE_SEED_RANGE);
+
+	return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_LOCAL_SEED,
+			QCA808X_MASTER_SLAVE_SEED_CFG,
+			FIELD_PREP(QCA808X_MASTER_SLAVE_SEED_CFG, seed_value));
+}
+
+static int qca808x_phy_ms_seed_enable(struct phy_device *phydev, bool enable)
+{
+	u16 seed_enable = 0;
+
+	if (enable)
+		seed_enable = QCA808X_MASTER_SLAVE_SEED_ENABLE;
+
+	return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_LOCAL_SEED,
+			QCA808X_MASTER_SLAVE_SEED_ENABLE, seed_enable);
+}
+
 static int qca808x_config_init(struct phy_device *phydev)
 {
 	int ret;
@@ -1590,6 +1616,16 @@ static int qca808x_config_init(struct phy_device *phydev)
 	if (ret)
 		return ret;
 
+	/* Configure lower ramdom seed to make phy linked as slave mode */
+	ret = qca808x_phy_ms_random_seed_set(phydev);
+	if (ret)
+		return ret;
+
+	/* Enable seed */
+	ret = qca808x_phy_ms_seed_enable(phydev, true);
+	if (ret)
+		return ret;
+
 	/* Configure adc threshold as 100mv for the link 10M */
 	return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_ADC_THRESHOLD,
 			QCA808X_ADC_THRESHOLD_MASK, QCA808X_ADC_THRESHOLD_100MV);
@@ -1622,6 +1658,17 @@ static int qca808x_read_status(struct phy_device *phydev)
 	return 0;
 }
 
+static int qca808x_soft_reset(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = genphy_soft_reset(phydev);
+	if (ret < 0)
+		return ret;
+
+	return qca808x_phy_ms_seed_enable(phydev, true);
+}
+
 static struct phy_driver at803x_driver[] = {
 {
 	/* Qualcomm Atheros AR8035 */
@@ -1797,6 +1844,7 @@ static struct phy_driver at803x_driver[] = {
 	.resume			= genphy_resume,
 	.read_status		= qca808x_read_status,
 	.config_init		= qca808x_config_init,
+	.soft_reset		= qca808x_soft_reset,
 }, };
 
 module_phy_driver(at803x_driver);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


  parent reply	other threads:[~2021-10-24  8:28 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-24  8:27 [PATCH v7 0/14] net: phy: Add qca8081 ethernet phy driver Luo Jie
2021-10-24  8:27 ` [PATCH v7 01/14] net: phy: at803x: replace AT803X_DEVICE_ADDR with MDIO_MMD_PCS Luo Jie
2021-10-24  8:27 ` [PATCH v7 02/14] net: phy: at803x: use phy_modify() Luo Jie
2021-10-24  8:27 ` [PATCH v7 03/14] net: phy: at803x: improve the WOL feature Luo Jie
2021-10-24 18:29   ` Andrew Lunn
2021-10-24  8:27 ` [PATCH v7 04/14] net: phy: at803x: use GENMASK() for speed status Luo Jie
2021-10-24  8:27 ` [PATCH v7 05/14] net: phy: add qca8081 ethernet phy driver Luo Jie
2021-10-24 18:29   ` Andrew Lunn
2021-10-24  8:27 ` [PATCH v7 06/14] net: phy: add qca8081 read_status Luo Jie
2021-10-24 18:30   ` Andrew Lunn
2021-10-24  8:27 ` [PATCH v7 07/14] net: phy: add qca8081 get_features Luo Jie
2021-10-24 18:31   ` Andrew Lunn
2021-10-24  8:27 ` [PATCH v7 08/14] net: phy: add qca8081 config_aneg Luo Jie
2021-10-24 18:31   ` Andrew Lunn
2021-10-24  8:27 ` [PATCH v7 09/14] net: phy: add constants for fast retrain related register Luo Jie
2021-10-24 18:32   ` Andrew Lunn
2021-10-24  8:27 ` [PATCH v7 10/14] net: phy: add genphy_c45_fast_retrain Luo Jie
2021-10-24 18:33   ` Andrew Lunn
2021-10-24  8:27 ` [PATCH v7 11/14] net: phy: add qca8081 config_init Luo Jie
2021-10-24 18:34   ` Andrew Lunn
2021-10-24  8:27 ` Luo Jie [this message]
2021-10-24 18:40   ` [PATCH v7 12/14] net: phy: add qca8081 soft_reset and enable master/slave seed Andrew Lunn
2021-10-24  8:27 ` [PATCH v7 13/14] net: phy: adjust qca8081 master/slave seed value if link down Luo Jie
2021-10-24 18:41   ` Andrew Lunn
2021-10-24  8:27 ` [PATCH v7 14/14] net: phy: add qca8081 cdt feature Luo Jie
2021-10-24 18:43   ` Andrew Lunn
2021-10-25 13:10 ` [PATCH v7 0/14] net: phy: Add qca8081 ethernet phy driver patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211024082738.849-13-luoj@codeaurora.org \
    --to=luoj@codeaurora.org \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=hkallweit1@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=sricharan@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).