From: Randy Dunlap <rdunlap@infradead.org>
To: netdev@vger.kernel.org
Cc: Randy Dunlap <rdunlap@infradead.org>,
kernel test robot <lkp@intel.com>,
Aleksander Jan Bajkowski <olek2@wp.pl>,
Hauke Mehrtens <hauke@hauke-m.de>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>, John Crispin <john@phrozen.org>,
linux-mips@vger.kernel.org, Ralf Baechle <ralf@linux-mips.org>,
Michael Opdenacker <michael.opdenacker@bootlin.com>
Subject: [PATCH -net] net: ethernet: lantiq_etop: fix build errors/warnings
Date: Sun, 14 Nov 2021 17:02:29 -0800 [thread overview]
Message-ID: <20211115010229.15933-1-rdunlap@infradead.org> (raw)
Fix build error and warnings reported by kernel test robot:
drivers/net/ethernet/lantiq_etop.c: In function 'ltq_etop_probe':
drivers/net/ethernet/lantiq_etop.c:673:15: error: implicit declaration of function 'device_property_read_u32' [-Werror=implicit-function-declaration]
673 | err = device_property_read_u32(&pdev->dev, "lantiq,tx-burst-length", &priv->tx_burst_len);
drivers/net/ethernet/lantiq_etop.c: At top level:
drivers/net/ethernet/lantiq_etop.c:730:1: warning: no previous prototype for 'init_ltq_etop' [-Wmissing-prototypes]
730 | init_ltq_etop(void)
drivers/net/ethernet/lantiq_etop.c: In function 'ltq_etop_hw_init':
drivers/net/ethernet/lantiq_etop.c:276:25: warning: ignoring return value of 'request_irq' declared with attribute 'warn_unused_result' [-Wunused-result]
276 | request_irq(irq, ltq_etop_dma_irq, 0, "etop_tx", priv);
drivers/net/ethernet/lantiq_etop.c:284:25: warning: ignoring return value of 'request_irq' declared with attribute 'warn_unused_result' [-Wunused-result]
284 | request_irq(irq, ltq_etop_dma_irq, 0, "etop_rx", priv);
Fixes: 14d4e308e0aa ("net: lantiq: configure the burst length in ethernet drivers")
Fixes: dddb29e42770 ("net: lantiq_etop: remove deprecated IRQF_DISABLED")
Fixes: 504d4721ee8e ("MIPS: Lantiq: Add ethernet driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: lore.kernel.org/r/202111090621.yjr9xuVj-lkp@intel.com
To: netdev@vger.kernel.org
Cc: Aleksander Jan Bajkowski <olek2@wp.pl>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Michael Opdenacker <michael.opdenacker@bootlin.com>
---
drivers/net/ethernet/lantiq_etop.c | 20 +++++++++++++++++---
1 file changed, 17 insertions(+), 3 deletions(-)
--- linux-next-20211112.orig/drivers/net/ethernet/lantiq_etop.c
+++ linux-next-20211112/drivers/net/ethernet/lantiq_etop.c
@@ -25,6 +25,7 @@
#include <linux/io.h>
#include <linux/dma-mapping.h>
#include <linux/module.h>
+#include <linux/property.h>
#include <asm/checksum.h>
@@ -239,6 +240,7 @@ ltq_etop_hw_init(struct net_device *dev)
{
struct ltq_etop_priv *priv = netdev_priv(dev);
int i;
+ int err;
ltq_pmu_enable(PMU_PPE);
@@ -273,7 +275,13 @@ ltq_etop_hw_init(struct net_device *dev)
if (IS_TX(i)) {
ltq_dma_alloc_tx(&ch->dma);
- request_irq(irq, ltq_etop_dma_irq, 0, "etop_tx", priv);
+ err = request_irq(irq, ltq_etop_dma_irq, 0, "etop_tx", priv);
+ if (err) {
+ netdev_err(dev,
+ "Unable to get Tx DMA IRQ %d\n",
+ irq);
+ return err;
+ }
} else if (IS_RX(i)) {
ltq_dma_alloc_rx(&ch->dma);
for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
@@ -281,7 +289,13 @@ ltq_etop_hw_init(struct net_device *dev)
if (ltq_etop_alloc_skb(ch))
return -ENOMEM;
ch->dma.desc = 0;
- request_irq(irq, ltq_etop_dma_irq, 0, "etop_rx", priv);
+ err = request_irq(irq, ltq_etop_dma_irq, 0, "etop_rx", priv);
+ if (err) {
+ netdev_err(dev,
+ "Unable to get Rx DMA IRQ %d\n",
+ irq);
+ return err;
+ }
}
ch->dma.irq = irq;
}
@@ -726,7 +740,7 @@ static struct platform_driver ltq_mii_dr
},
};
-int __init
+static int __init
init_ltq_etop(void)
{
int ret = platform_driver_probe(<q_mii_driver, ltq_etop_probe);
next reply other threads:[~2021-11-15 1:02 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-15 1:02 Randy Dunlap [this message]
2021-11-15 14:10 ` [PATCH -net] net: ethernet: lantiq_etop: fix build errors/warnings patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211115010229.15933-1-rdunlap@infradead.org \
--to=rdunlap@infradead.org \
--cc=davem@davemloft.net \
--cc=hauke@hauke-m.de \
--cc=john@phrozen.org \
--cc=kuba@kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=lkp@intel.com \
--cc=michael.opdenacker@bootlin.com \
--cc=netdev@vger.kernel.org \
--cc=olek2@wp.pl \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).