From: Vladimir Oltean <olteanv@gmail.com>
To: Ansuel Smith <ansuelsmth@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>,
Vivien Didelot <vivien.didelot@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Russell King <linux@armlinux.org.uk>,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org
Subject: Re: [net-next PATCH 15/19] net: dsa: qca8k: add LAG support
Date: Fri, 19 Nov 2021 04:13:23 +0200 [thread overview]
Message-ID: <20211119021323.jdrgxqq27cqvkwn6@skbuf> (raw)
In-Reply-To: <20211117210451.26415-16-ansuelsmth@gmail.com>
On Wed, Nov 17, 2021 at 10:04:47PM +0100, Ansuel Smith wrote:
> Add LAG support to this switch. In Documentation this is described as
> trunk mode. A max of 4 LAGs are supported and each can support up to 4
> port. The only tx mode supported is Hash mode and no reference is
> present for active backup or any other mode in Documentation.
> When no port are present in the trunk, the trunk is disabled in the
> switch.
>
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> ---
> drivers/net/dsa/qca8k.c | 117 ++++++++++++++++++++++++++++++++++++++++
> drivers/net/dsa/qca8k.h | 24 +++++++++
> 2 files changed, 141 insertions(+)
>
> diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
> index a217c842ab45..c3234988aabf 100644
> --- a/drivers/net/dsa/qca8k.c
> +++ b/drivers/net/dsa/qca8k.c
> @@ -1312,6 +1312,9 @@ qca8k_setup(struct dsa_switch *ds)
> ds->ageing_time_min = 7000;
> ds->ageing_time_max = 458745000;
>
> + /* Set max number of LAGs supported */
> + ds->num_lag_ids = QCA8K_NUM_LAGS;
> +
> return 0;
> }
>
> @@ -2220,6 +2223,118 @@ qca8k_get_tag_protocol(struct dsa_switch *ds, int port,
> return DSA_TAG_PROTO_QCA;
> }
>
> +static bool
> +qca8k_lag_can_offload(struct dsa_switch *ds,
> + struct net_device *lag,
> + struct netdev_lag_upper_info *info)
> +{
> + struct dsa_port *dp;
> + int id, members = 0;
> +
> + id = dsa_lag_id(ds->dst, lag);
> + if (id < 0 || id >= ds->num_lag_ids)
> + return false;
> +
> + dsa_lag_foreach_port(dp, ds->dst, lag)
> + /* Includes the port joining the LAG */
> + members++;
> +
> + if (members > QCA8K_NUM_PORTS_FOR_LAG)
> + return false;
> +
> + if (info->tx_type != NETDEV_LAG_TX_TYPE_HASH)
> + return false;
You'll get bonus points if you also validate info->hash_type.
> +
> + return true;
> +}
> +
> +static int
> +qca8k_lag_refresh_portmap(struct dsa_switch *ds, int port,
> + struct net_device *lag, bool delete)
> +{
> + struct qca8k_priv *priv = ds->priv;
> + int ret, id, i;
> + u32 val;
> +
> + id = dsa_lag_id(ds->dst, lag);
> +
> + /* Read current port member */
> + ret = regmap_read(priv->regmap, QCA8K_REG_GOL_TRUNK_CTRL0, &val);
> + if (ret)
> + return ret;
> +
> + /* Shift val to the correct trunk */
> + val >>= QCA8K_REG_GOL_TRUNK_SHIFT(id);
> + val &= QCA8K_REG_GOL_TRUNK_MEMBER_MASK;
> + if (delete)
> + val &= ~BIT(port);
> + else
> + val |= BIT(port);
> +
> + /* Update port member. With empty portmap disable trunk */
> + ret = regmap_update_bits(priv->regmap, QCA8K_REG_GOL_TRUNK_CTRL0,
> + QCA8K_REG_GOL_TRUNK_MEMBER(id) |
> + QCA8K_REG_GOL_TRUNK_EN(id),
> + !val << QCA8K_REG_GOL_TRUNK_SHIFT(id) |
> + val << QCA8K_REG_GOL_TRUNK_SHIFT(id));
> +
> + /* Search empty member if adding or port on deleting */
> + for (i = 0; i < 4; i++) {
> + ret = regmap_read(priv->regmap, QCA8K_REG_GOL_TRUNK_CTRL(id), &val);
> + if (ret)
> + return ret;
> +
> + val >>= QCA8K_REG_GOL_TRUNK_ID_MEM_ID_SHIFT(id, i);
> + val &= QCA8K_REG_GOL_TRUNK_ID_MEM_ID_MASK;
> +
> + if (delete) {
> + /* If port flagged to be disabled assume this member is
> + * empty
> + */
> + if (val != QCA8K_REG_GOL_TRUNK_ID_MEM_ID_EN_MASK)
> + continue;
> +
> + val &= QCA8K_REG_GOL_TRUNK_ID_MEM_ID_PORT_MASK;
> + if (val != port)
> + continue;
> + } else {
> + /* If port flagged to be enabled assume this member is
> + * already set
> + */
> + if (val == QCA8K_REG_GOL_TRUNK_ID_MEM_ID_EN_MASK)
> + continue;
> + }
> +
> + /* We find the member to remove */
> + break;
> + }
> +
> + /* Set port in the correct port mask or disable port if in delate mode */
> + return regmap_update_bits(priv->regmap, QCA8K_REG_GOL_TRUNK_CTRL(id),
> + QCA8K_REG_GOL_TRUNK_ID_MEM_ID_EN(id, i) |
> + QCA8K_REG_GOL_TRUNK_ID_MEM_ID_PORT(id, i),
> + !delete << QCA8K_REG_GOL_TRUNK_ID_MEM_ID_SHIFT(id, i) |
> + port << QCA8K_REG_GOL_TRUNK_ID_MEM_ID_SHIFT(id, i));
> +}
> +
> +static int
> +qca8k_port_lag_join(struct dsa_switch *ds, int port,
> + struct net_device *lag,
> + struct netdev_lag_upper_info *info)
> +{
> + if (!qca8k_lag_can_offload(ds, lag, info))
> + return -EOPNOTSUPP;
> +
> + return qca8k_lag_refresh_portmap(ds, port, lag, false);
> +}
> +
> +static int
> +qca8k_port_lag_leave(struct dsa_switch *ds, int port,
> + struct net_device *lag)
> +{
> + return qca8k_lag_refresh_portmap(ds, port, lag, true);
> +}
> +
> static const struct dsa_switch_ops qca8k_switch_ops = {
> .get_tag_protocol = qca8k_get_tag_protocol,
> .setup = qca8k_setup,
> @@ -2253,6 +2368,8 @@ static const struct dsa_switch_ops qca8k_switch_ops = {
> .phylink_mac_link_down = qca8k_phylink_mac_link_down,
> .phylink_mac_link_up = qca8k_phylink_mac_link_up,
> .get_phy_flags = qca8k_get_phy_flags,
> + .port_lag_join = qca8k_port_lag_join,
> + .port_lag_leave = qca8k_port_lag_leave,
If you unplug a cable from the LAG, does the traffic that was going
through that port automatically get rebalanced towards the other ports
that are left? If not, shouldn't you also implement ->port_lag_change?
> };
>
> static int
> diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h
> index e1298179d7cb..5310022569f3 100644
> --- a/drivers/net/dsa/qca8k.h
> +++ b/drivers/net/dsa/qca8k.h
> @@ -15,6 +15,8 @@
> #define QCA8K_NUM_PORTS 7
> #define QCA8K_NUM_CPU_PORTS 2
> #define QCA8K_MAX_MTU 9000
> +#define QCA8K_NUM_LAGS 4
> +#define QCA8K_NUM_PORTS_FOR_LAG 4
>
> #define PHY_ID_QCA8327 0x004dd034
> #define QCA8K_ID_QCA8327 0x12
> @@ -204,6 +206,28 @@
> #define QCA8K_PORT_LOOKUP_LEARN BIT(20)
> #define QCA8K_PORT_LOOKUP_ING_MIRROR_EN BIT(25)
>
> +#define QCA8K_REG_GOL_TRUNK_CTRL0 0x700
> +/* 4 max trunk first
> + * first 6 bit for member bitmap
> + * 7th bit is to enable trunk port
> + */
> +#define QCA8K_REG_GOL_TRUNK_SHIFT(_i) ((_i) * 8)
> +#define QCA8K_REG_GOL_TRUNK_EN_MASK BIT(7)
> +#define QCA8K_REG_GOL_TRUNK_EN(_i) (QCA8K_REG_GOL_TRUNK_EN_MASK << QCA8K_REG_GOL_TRUNK_SHIFT(_i))
> +#define QCA8K_REG_GOL_TRUNK_MEMBER_MASK GENMASK(6, 0)
> +#define QCA8K_REG_GOL_TRUNK_MEMBER(_i) (QCA8K_REG_GOL_TRUNK_MEMBER_MASK << QCA8K_REG_GOL_TRUNK_SHIFT(_i))
> +/* 0x704 for TRUNK 0-1 --- 0x708 for TRUNK 2-3 */
> +#define QCA8K_REG_GOL_TRUNK_CTRL(_i) (0x704 + (((_i) / 2) * 4))
> +#define QCA8K_REG_GOL_TRUNK_ID_MEM_ID_MASK GENMASK(3, 0)
> +#define QCA8K_REG_GOL_TRUNK_ID_MEM_ID_EN_MASK BIT(3)
> +#define QCA8K_REG_GOL_TRUNK_ID_MEM_ID_PORT_MASK GENMASK(2, 0)
> +#define QCA8K_REG_GOL_TRUNK_ID_SHIFT(_i) (((_i) / 2) * 16)
> +#define QCA8K_REG_GOL_MEM_ID_SHIFT(_i) ((_i) * 4)
> +/* Complex shift: FIRST shift for port THEN shift for trunk */
> +#define QCA8K_REG_GOL_TRUNK_ID_MEM_ID_SHIFT(_i, _j) (QCA8K_REG_GOL_MEM_ID_SHIFT(_j) + QCA8K_REG_GOL_TRUNK_ID_SHIFT(_i))
> +#define QCA8K_REG_GOL_TRUNK_ID_MEM_ID_EN(_i, _j) (QCA8K_REG_GOL_TRUNK_ID_MEM_ID_EN_MASK << QCA8K_REG_GOL_TRUNK_ID_MEM_ID_SHIFT(_i, _j))
> +#define QCA8K_REG_GOL_TRUNK_ID_MEM_ID_PORT(_i, _j) (QCA8K_REG_GOL_TRUNK_ID_MEM_ID_PORT_MASK << QCA8K_REG_GOL_TRUNK_ID_MEM_ID_SHIFT(_i, _j))
> +
> #define QCA8K_REG_GLOBAL_FC_THRESH 0x800
> #define QCA8K_GLOBAL_FC_GOL_XON_THRES_MASK GENMASK(24, 16)
> #define QCA8K_GLOBAL_FC_GOL_XON_THRES(x) FIELD_PREP(QCA8K_GLOBAL_FC_GOL_XON_THRES_MASK, x)
> --
> 2.32.0
>
next prev parent reply other threads:[~2021-11-19 2:13 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-17 21:04 [net-next PATCH 00/19] Multiple cleanup and feature for qca8k Ansuel Smith
2021-11-17 21:04 ` regmap: allow to define reg_update_bits for no bus configuration Ansuel Smith
2021-11-17 22:15 ` Mark Brown
2021-11-17 22:19 ` Ansuel Smith
2021-11-17 22:33 ` Mark Brown
2021-11-19 1:54 ` Jakub Kicinski
2021-11-19 2:00 ` Ansuel Smith
2021-11-19 2:00 ` patchwork-bot+netdevbpf
2021-11-17 21:04 ` [net-next PATCH 02/19] net: dsa: qca8k: remove redundant check in parse_port_config Ansuel Smith
2021-11-18 23:59 ` Vladimir Oltean
2021-11-17 21:04 ` [net-next PATCH 03/19] net: dsa: qca8k: skip sgmii delay on double cpu conf Ansuel Smith
2021-11-19 0:58 ` Vladimir Oltean
2021-11-17 21:04 ` [net-next PATCH 04/19] net: dsa: qca8k: convert to GENMASK/FIELD_PREP/FIELD_GET Ansuel Smith
2021-11-17 21:04 ` [net-next PATCH 05/19] net: dsa: qca8k: move read switch id function in qca8k_setup Ansuel Smith
2021-11-19 1:03 ` Vladimir Oltean
2021-11-19 1:08 ` Ansuel Smith
2021-11-21 18:34 ` Vladimir Oltean
2021-11-17 21:04 ` [net-next PATCH 06/19] net: dsa: qca8k: remove extra mutex_init " Ansuel Smith
2021-11-17 21:04 ` [net-next PATCH 07/19] net: dsa: qca8k: set regmap init as mandatory for regmap conversion Ansuel Smith
2021-11-19 1:09 ` Vladimir Oltean
2021-11-17 21:04 ` [net-next PATCH 08/19] net: dsa: qca8k: convert qca8k to regmap helper Ansuel Smith
2021-11-19 1:14 ` Vladimir Oltean
2021-11-19 1:28 ` Ansuel Smith
2021-11-21 18:31 ` Vladimir Oltean
2021-11-17 21:04 ` [net-next PATCH 09/19] net: dsa: qca8k: add additional MIB counter and make it dynamic Ansuel Smith
2021-11-19 1:17 ` Vladimir Oltean
2021-11-17 21:04 ` [net-next PATCH 10/19] net: dsa: qca8k: add support for port fast aging Ansuel Smith
2021-11-19 1:20 ` Vladimir Oltean
2021-11-17 21:04 ` [net-next PATCH 11/19] net: dsa: qca8k: add support for mirror mode Ansuel Smith
2021-11-19 1:42 ` Vladimir Oltean
2021-11-17 21:04 ` [net-next PATCH 12/19] net: dsa: qca8k: add set_ageing_time support Ansuel Smith
2021-11-19 1:47 ` Vladimir Oltean
2021-11-17 21:04 ` [net-next PATCH 13/19] net: dsa: qca8k: add min/max ageing time Ansuel Smith
2021-11-19 1:49 ` Vladimir Oltean
2021-11-17 21:04 ` [net-next PATCH 14/19] net: dsa: qca8k: add support for mdb_add/del Ansuel Smith
2021-11-19 2:06 ` Vladimir Oltean
2021-11-19 2:19 ` Ansuel Smith
2021-11-19 2:33 ` Vladimir Oltean
2021-11-17 21:04 ` [net-next PATCH 15/19] net: dsa: qca8k: add LAG support Ansuel Smith
2021-11-19 2:13 ` Vladimir Oltean [this message]
2021-11-17 21:04 ` [net-next PATCH 16/19] net: dsa: qca8k: enable mtu_enforcement_ingress Ansuel Smith
2021-11-19 2:20 ` Vladimir Oltean
2021-11-19 2:28 ` Ansuel Smith
2021-11-21 18:11 ` Vladimir Oltean
2021-11-17 21:04 ` [net-next PATCH 17/19] net: dsa: qca8k: move qca8k to qca dir Ansuel Smith
2021-11-17 21:04 ` [net-next PATCH 18/19] net: dsa: qca8k: use device_get_match_data instead of the OF variant Ansuel Smith
2021-11-19 2:21 ` Vladimir Oltean
2021-11-19 2:32 ` Ansuel Smith
2021-11-21 18:03 ` Vladimir Oltean
2021-11-17 21:04 ` [net-next PATCH 19/19] net: dsa: qca8k: split qca8k in common and 8xxx specific code Ansuel Smith
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211119021323.jdrgxqq27cqvkwn6@skbuf \
--to=olteanv@gmail.com \
--cc=andrew@lunn.ch \
--cc=ansuelsmth@gmail.com \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox