netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Marek Behún" <kabel@kernel.org>
To: netdev@vger.kernel.org
Cc: "Jakub Kicinski" <kuba@kernel.org>,
	"Andrew Lunn" <andrew@lunn.ch>,
	"Sven Auhagen" <sven.auhagen@voleatech.de>,
	"Jesper Dangaard Brouer" <brouer@redhat.com>,
	davem@davemloft.net, "Marek Behún" <kabel@kernel.org>
Subject: [PATCH net] net: marvell: mvpp2: increase MTU limit when XDP enabled
Date: Mon, 22 Nov 2021 21:08:34 +0100	[thread overview]
Message-ID: <20211122200834.29219-1-kabel@kernel.org> (raw)

Currently mvpp2_xdp_setup won't allow attaching XDP program if
  mtu > ETH_DATA_LEN (1500).

The mvpp2_change_mtu on the other hand checks whether
  MVPP2_RX_PKT_SIZE(mtu) > MVPP2_BM_LONG_PKT_SIZE.

These two checks are semantically different.

Moreover this limit can be increased to MVPP2_MAX_RX_BUF_SIZE, since in
mvpp2_rx we have
  xdp.data = data + MVPP2_MH_SIZE + MVPP2_SKB_HEADROOM;
  xdp.frame_sz = PAGE_SIZE;

Change the checks to check whether
  mtu > MVPP2_MAX_RX_BUF_SIZE

Fixes: 07dd0a7aae7f ("mvpp2: add basic XDP support")
Signed-off-by: Marek Behún <kabel@kernel.org>
---
The NL_SET_ERR_MSG_MOD() is not a printf-like function, the message
must be a string literal. The last time Andrew Lunn asked if I could
use some CPP magic to make it print the MVPP2_MAX_RX_BUF_SIZE, since
it is a constant.

I don't think this is possible, so we won't be printing the maximum
possible value when failing to enable XDP due to MTU is too large.

But I changed the patch so that it now prints the maximum possible value
in the MTU change function when XDP is already enabled.

I also added Fixes tag.
---
 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 49fc31fe0db8..a3aefdf0784e 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -5017,11 +5017,13 @@ static int mvpp2_change_mtu(struct net_device *dev, int mtu)
 		mtu = ALIGN(MVPP2_RX_PKT_SIZE(mtu), 8);
 	}
 
+	if (port->xdp_prog && mtu > MVPP2_MAX_RX_BUF_SIZE) {
+		netdev_err(dev, "Illegal MTU value %d (> %d) for XDP mode\n",
+			   mtu, (int)MVPP2_MAX_RX_BUF_SIZE);
+		return -EINVAL;
+	}
+
 	if (MVPP2_RX_PKT_SIZE(mtu) > MVPP2_BM_LONG_PKT_SIZE) {
-		if (port->xdp_prog) {
-			netdev_err(dev, "Jumbo frames are not supported with XDP\n");
-			return -EINVAL;
-		}
 		if (priv->percpu_pools) {
 			netdev_warn(dev, "mtu %d too high, switching to shared buffers", mtu);
 			mvpp2_bm_switch_buffers(priv, false);
@@ -5307,8 +5309,8 @@ static int mvpp2_xdp_setup(struct mvpp2_port *port, struct netdev_bpf *bpf)
 	bool running = netif_running(port->dev);
 	bool reset = !prog != !port->xdp_prog;
 
-	if (port->dev->mtu > ETH_DATA_LEN) {
-		NL_SET_ERR_MSG_MOD(bpf->extack, "XDP is not supported with jumbo frames enabled");
+	if (port->dev->mtu > MVPP2_MAX_RX_BUF_SIZE) {
+		NL_SET_ERR_MSG_MOD(bpf->extack, "MTU too large for XDP");
 		return -EOPNOTSUPP;
 	}
 
-- 
2.32.0


             reply	other threads:[~2021-11-22 20:08 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-22 20:08 Marek Behún [this message]
2021-11-23 12:40 ` [PATCH net] net: marvell: mvpp2: increase MTU limit when XDP enabled patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211122200834.29219-1-kabel@kernel.org \
    --to=kabel@kernel.org \
    --cc=andrew@lunn.ch \
    --cc=brouer@redhat.com \
    --cc=davem@davemloft.net \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=sven.auhagen@voleatech.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).