netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ido Schimmel <idosch@idosch.org>
To: netdev@vger.kernel.org
Cc: mkubecek@suse.cz, vadimp@nvidia.com, mlxsw@nvidia.com,
	Ido Schimmel <idosch@nvidia.com>
Subject: [PATCH ethtool-next 1/3] Update UAPI header copies
Date: Tue,  7 Dec 2021 11:33:57 +0200	[thread overview]
Message-ID: <20211207093359.69974-2-idosch@idosch.org> (raw)
In-Reply-To: <20211207093359.69974-1-idosch@idosch.org>

From: Ido Schimmel <idosch@nvidia.com>

Update to kernel commit 1c5526968e27.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
---
 uapi/linux/ethtool.h         | 30 ++++++++++++++++++++++++++++++
 uapi/linux/ethtool_netlink.h | 22 +++++++++++++++++++++-
 uapi/linux/if_link.h         |  1 +
 3 files changed, 52 insertions(+), 1 deletion(-)

diff --git a/uapi/linux/ethtool.h b/uapi/linux/ethtool.h
index a7f549aab845..85548f96e2e2 100644
--- a/uapi/linux/ethtool.h
+++ b/uapi/linux/ethtool.h
@@ -229,6 +229,7 @@ enum tunable_id {
 	ETHTOOL_RX_COPYBREAK,
 	ETHTOOL_TX_COPYBREAK,
 	ETHTOOL_PFC_PREVENTION_TOUT, /* timeout in msecs */
+	ETHTOOL_TX_COPYBREAK_BUF_SIZE,
 	/*
 	 * Add your fresh new tunable attribute above and remember to update
 	 * tunable_strings[] in net/ethtool/common.c
@@ -601,6 +602,7 @@ enum ethtool_link_ext_state {
 	ETHTOOL_LINK_EXT_STATE_CALIBRATION_FAILURE,
 	ETHTOOL_LINK_EXT_STATE_POWER_BUDGET_EXCEEDED,
 	ETHTOOL_LINK_EXT_STATE_OVERHEAT,
+	ETHTOOL_LINK_EXT_STATE_MODULE,
 };
 
 /* More information in addition to ETHTOOL_LINK_EXT_STATE_AUTONEG. */
@@ -647,6 +649,11 @@ enum ethtool_link_ext_substate_cable_issue {
 	ETHTOOL_LINK_EXT_SUBSTATE_CI_CABLE_TEST_FAILURE,
 };
 
+/* More information in addition to ETHTOOL_LINK_EXT_STATE_MODULE. */
+enum ethtool_link_ext_substate_module {
+	ETHTOOL_LINK_EXT_SUBSTATE_MODULE_CMIS_NOT_READY = 1,
+};
+
 #define ETH_GSTRING_LEN		32
 
 /**
@@ -704,6 +711,29 @@ enum ethtool_stringset {
 	ETH_SS_COUNT
 };
 
+/**
+ * enum ethtool_module_power_mode_policy - plug-in module power mode policy
+ * @ETHTOOL_MODULE_POWER_MODE_POLICY_HIGH: Module is always in high power mode.
+ * @ETHTOOL_MODULE_POWER_MODE_POLICY_AUTO: Module is transitioned by the host
+ *	to high power mode when the first port using it is put administratively
+ *	up and to low power mode when the last port using it is put
+ *	administratively down.
+ */
+enum ethtool_module_power_mode_policy {
+	ETHTOOL_MODULE_POWER_MODE_POLICY_HIGH = 1,
+	ETHTOOL_MODULE_POWER_MODE_POLICY_AUTO,
+};
+
+/**
+ * enum ethtool_module_power_mode - plug-in module power mode
+ * @ETHTOOL_MODULE_POWER_MODE_LOW: Module is in low power mode.
+ * @ETHTOOL_MODULE_POWER_MODE_HIGH: Module is in high power mode.
+ */
+enum ethtool_module_power_mode {
+	ETHTOOL_MODULE_POWER_MODE_LOW = 1,
+	ETHTOOL_MODULE_POWER_MODE_HIGH,
+};
+
 /**
  * struct ethtool_gstrings - string set for data tagging
  * @cmd: Command number = %ETHTOOL_GSTRINGS
diff --git a/uapi/linux/ethtool_netlink.h b/uapi/linux/ethtool_netlink.h
index 5665d6432172..d8b19cf98003 100644
--- a/uapi/linux/ethtool_netlink.h
+++ b/uapi/linux/ethtool_netlink.h
@@ -47,6 +47,8 @@ enum {
 	ETHTOOL_MSG_MODULE_EEPROM_GET,
 	ETHTOOL_MSG_STATS_GET,
 	ETHTOOL_MSG_PHC_VCLOCKS_GET,
+	ETHTOOL_MSG_MODULE_GET,
+	ETHTOOL_MSG_MODULE_SET,
 
 	/* add new constants above here */
 	__ETHTOOL_MSG_USER_CNT,
@@ -90,6 +92,8 @@ enum {
 	ETHTOOL_MSG_MODULE_EEPROM_GET_REPLY,
 	ETHTOOL_MSG_STATS_GET_REPLY,
 	ETHTOOL_MSG_PHC_VCLOCKS_GET_REPLY,
+	ETHTOOL_MSG_MODULE_GET_REPLY,
+	ETHTOOL_MSG_MODULE_NTF,
 
 	/* add new constants above here */
 	__ETHTOOL_MSG_KERNEL_CNT,
@@ -325,6 +329,7 @@ enum {
 	ETHTOOL_A_RINGS_RX_MINI,			/* u32 */
 	ETHTOOL_A_RINGS_RX_JUMBO,			/* u32 */
 	ETHTOOL_A_RINGS_TX,				/* u32 */
+	ETHTOOL_A_RINGS_RX_BUF_LEN,                     /* u32 */
 
 	/* add new constants above here */
 	__ETHTOOL_A_RINGS_CNT,
@@ -407,7 +412,9 @@ enum {
 	ETHTOOL_A_PAUSE_STAT_TX_FRAMES,
 	ETHTOOL_A_PAUSE_STAT_RX_FRAMES,
 
-	/* add new constants above here */
+	/* add new constants above here
+	 * adjust ETHTOOL_PAUSE_STAT_CNT if adding non-stats!
+	 */
 	__ETHTOOL_A_PAUSE_STAT_CNT,
 	ETHTOOL_A_PAUSE_STAT_MAX = (__ETHTOOL_A_PAUSE_STAT_CNT - 1)
 };
@@ -833,6 +840,19 @@ enum {
 	ETHTOOL_A_STATS_RMON_MAX = (__ETHTOOL_A_STATS_RMON_CNT - 1)
 };
 
+/* MODULE */
+
+enum {
+	ETHTOOL_A_MODULE_UNSPEC,
+	ETHTOOL_A_MODULE_HEADER,		/* nest - _A_HEADER_* */
+	ETHTOOL_A_MODULE_POWER_MODE_POLICY,	/* u8 */
+	ETHTOOL_A_MODULE_POWER_MODE,		/* u8 */
+
+	/* add new constants above here */
+	__ETHTOOL_A_MODULE_CNT,
+	ETHTOOL_A_MODULE_MAX = (__ETHTOOL_A_MODULE_CNT - 1)
+};
+
 /* generic netlink info */
 #define ETHTOOL_GENL_NAME "ethtool"
 #define ETHTOOL_GENL_VERSION 1
diff --git a/uapi/linux/if_link.h b/uapi/linux/if_link.h
index 1d4ed60bc779..9ed264d556f8 100644
--- a/uapi/linux/if_link.h
+++ b/uapi/linux/if_link.h
@@ -856,6 +856,7 @@ enum {
 	IFLA_BOND_TLB_DYNAMIC_LB,
 	IFLA_BOND_PEER_NOTIF_DELAY,
 	IFLA_BOND_AD_LACP_ACTIVE,
+	IFLA_BOND_MISSED_MAX,
 	__IFLA_BOND_MAX,
 };
 
-- 
2.31.1


  reply	other threads:[~2021-12-07  9:34 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-07  9:33 [PATCH ethtool-next 0/3] ethtool: Add ability to control transceiver modules' power mode Ido Schimmel
2021-12-07  9:33 ` Ido Schimmel [this message]
2021-12-07  9:33 ` [PATCH ethtool-next 2/3] " Ido Schimmel
2021-12-07  9:33 ` [PATCH ethtool-next 3/3] ethtool: Add transceiver module extended state Ido Schimmel
2021-12-17 18:00 ` [PATCH ethtool-next 0/3] ethtool: Add ability to control transceiver modules' power mode patchwork-bot+netdevbpf
  -- strict thread matches above, loose matches on Subject: below --
2024-01-03 14:29 [PATCH ethtool-next 0/3] ethtool: Introduce PHY listing and targetting Maxime Chevallier
2024-01-03 14:29 ` [PATCH ethtool-next 1/3] update UAPI header copies Maxime Chevallier
2025-03-05 17:33 [PATCH ethtool-next 0/3] Add support for hardware timestamp provider Kory Maincent
2025-03-05 17:33 ` [PATCH ethtool-next 1/3] update UAPI header copies Kory Maincent

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211207093359.69974-2-idosch@idosch.org \
    --to=idosch@idosch.org \
    --cc=idosch@nvidia.com \
    --cc=mkubecek@suse.cz \
    --cc=mlxsw@nvidia.com \
    --cc=netdev@vger.kernel.org \
    --cc=vadimp@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).