netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ansuel Smith <ansuelsmth@gmail.com>
To: Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	linux-kernel@vger.kernel.org, netdev@vger.kernel.org
Cc: Ansuel Smith <ansuelsmth@gmail.com>
Subject: [net-next PATCH RFC v6 16/16] net: dsa: qca8k: cache lo and hi for mdio write
Date: Tue, 14 Dec 2021 23:44:09 +0100	[thread overview]
Message-ID: <20211214224409.5770-17-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20211214224409.5770-1-ansuelsmth@gmail.com>

From Documentation, we can cache lo and hi the same way we do with the
page. This massively reduce the mdio write as 3/4 of the time as we only
require to write the lo or hi part for a mdio write.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/net/dsa/qca8k.c | 60 ++++++++++++++++++++++++++++++++---------
 drivers/net/dsa/qca8k.h |  5 ++++
 2 files changed, 53 insertions(+), 12 deletions(-)

diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index 4254cb12c7f7..cc8fac188389 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -88,6 +88,42 @@ qca8k_split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page)
 	*page = regaddr & 0x3ff;
 }
 
+static int
+qca8k_set_lo(struct mii_bus *bus, int phy_id, u32 regnum,
+	     u16 lo, u16 *cached_lo)
+{
+	int ret;
+
+	if (lo == *cached_lo)
+		return 0;
+
+	ret = bus->write(bus, phy_id, regnum, lo);
+	if (ret < 0)
+		dev_err_ratelimited(&bus->dev,
+				    "failed to write qca8k 32bit lo register\n");
+
+	*cached_lo = lo;
+	return 0;
+}
+
+static int
+qca8k_set_hi(struct mii_bus *bus, int phy_id, u32 regnum,
+	     u16 hi, u16 *cached_hi)
+{
+	int ret;
+
+	if (hi == *cached_hi)
+		return 0;
+
+	ret = bus->write(bus, phy_id, regnum, hi);
+	if (ret < 0)
+		dev_err_ratelimited(&bus->dev,
+				    "failed to write qca8k 32bit hi register\n");
+
+	*cached_hi = hi;
+	return 0;
+}
+
 static int
 qca8k_mii_read32(struct mii_bus *bus, int phy_id, u32 regnum, u32 *val)
 {
@@ -111,7 +147,8 @@ qca8k_mii_read32(struct mii_bus *bus, int phy_id, u32 regnum, u32 *val)
 }
 
 static void
-qca8k_mii_write32(struct mii_bus *bus, int phy_id, u32 regnum, u32 val)
+qca8k_mii_write32(struct mii_bus *bus, struct qca8k_mdio_cache *cache,
+		  int phy_id, u32 regnum, u32 val)
 {
 	u16 lo, hi;
 	int ret;
@@ -119,12 +156,9 @@ qca8k_mii_write32(struct mii_bus *bus, int phy_id, u32 regnum, u32 val)
 	lo = val & 0xffff;
 	hi = (u16)(val >> 16);
 
-	ret = bus->write(bus, phy_id, regnum, lo);
+	ret = qca8k_set_lo(bus, phy_id, regnum, lo, &cache->lo);
 	if (ret >= 0)
-		ret = bus->write(bus, phy_id, regnum + 1, hi);
-	if (ret < 0)
-		dev_err_ratelimited(&bus->dev,
-				    "failed to write qca8k 32bit register\n");
+		ret = qca8k_set_hi(bus, phy_id, regnum + 1, hi, &cache->hi);
 }
 
 static int
@@ -368,7 +402,7 @@ qca8k_regmap_write(void *ctx, uint32_t reg, uint32_t val)
 	if (ret < 0)
 		goto exit;
 
-	qca8k_mii_write32(bus, 0x10 | r2, r1, val);
+	qca8k_mii_write32(bus, mdio_cache, 0x10 | r2, r1, val);
 
 exit:
 	mutex_unlock(&bus->mdio_lock);
@@ -405,7 +439,7 @@ qca8k_regmap_update_bits(void *ctx, uint32_t reg, uint32_t mask, uint32_t write_
 
 	val &= ~mask;
 	val |= write_val;
-	qca8k_mii_write32(bus, 0x10 | r2, r1, val);
+	qca8k_mii_write32(bus, mdio_cache, 0x10 | r2, r1, val);
 
 exit:
 	mutex_unlock(&bus->mdio_lock);
@@ -1042,14 +1076,14 @@ qca8k_mdio_write(struct mii_bus *bus, struct qca8k_mdio_cache *cache,
 	if (ret)
 		goto exit;
 
-	qca8k_mii_write32(bus, 0x10 | r2, r1, val);
+	qca8k_mii_write32(bus, cache, 0x10 | r2, r1, val);
 
 	ret = qca8k_mdio_busy_wait(bus, QCA8K_MDIO_MASTER_CTRL,
 				   QCA8K_MDIO_MASTER_BUSY);
 
 exit:
 	/* even if the busy_wait timeouts try to clear the MASTER_EN */
-	qca8k_mii_write32(bus, 0x10 | r2, r1, 0);
+	qca8k_mii_write32(bus, cache, 0x10 | r2, r1, 0);
 
 	mutex_unlock(&bus->mdio_lock);
 
@@ -1079,7 +1113,7 @@ qca8k_mdio_read(struct mii_bus *bus, struct qca8k_mdio_cache *cache,
 	if (ret)
 		goto exit;
 
-	qca8k_mii_write32(bus, 0x10 | r2, r1, val);
+	qca8k_mii_write32(bus, cache, 0x10 | r2, r1, val);
 
 	ret = qca8k_mdio_busy_wait(bus, QCA8K_MDIO_MASTER_CTRL,
 				   QCA8K_MDIO_MASTER_BUSY);
@@ -1090,7 +1124,7 @@ qca8k_mdio_read(struct mii_bus *bus, struct qca8k_mdio_cache *cache,
 
 exit:
 	/* even if the busy_wait timeouts try to clear the MASTER_EN */
-	qca8k_mii_write32(bus, 0x10 | r2, r1, 0);
+	qca8k_mii_write32(bus, cache, 0x10 | r2, r1, 0);
 
 	mutex_unlock(&bus->mdio_lock);
 
@@ -2985,6 +3019,8 @@ qca8k_sw_probe(struct mdio_device *mdiodev)
 	}
 
 	priv->mdio_cache.page = 0xffff;
+	priv->mdio_cache.lo = 0xffff;
+	priv->mdio_cache.hi = 0xffff;
 
 	/* Check the detected switch id */
 	ret = qca8k_read_switch_id(priv);
diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h
index c4800ee06c34..79cd35f48730 100644
--- a/drivers/net/dsa/qca8k.h
+++ b/drivers/net/dsa/qca8k.h
@@ -369,6 +369,11 @@ struct qca8k_mdio_cache {
  * mdio writes
  */
 	u16 page;
+/* lo and hi can also be cached and from Documentation we can skip one
+ * extra mdio write if lo or hi is didn't change.
+ */
+	u16 lo;
+	u16 hi;
 };
 
 struct qca8k_priv {
-- 
2.33.1


  parent reply	other threads:[~2021-12-14 22:45 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-14 22:43 [net-next PATCH RFC v6 00/16] Add support for qca8k mdio rw in Ethernet packet Ansuel Smith
2021-12-14 22:43 ` [net-next PATCH RFC v6 01/16] net: dsa: provide switch operations for tracking the master state Ansuel Smith
2021-12-14 22:43 ` [net-next PATCH RFC v6 02/16] net: dsa: stop updating master MTU from master.c Ansuel Smith
2021-12-14 22:43 ` [net-next PATCH RFC v6 03/16] net: dsa: hold rtnl_mutex when calling dsa_master_{setup,teardown} Ansuel Smith
2021-12-14 22:43 ` [net-next PATCH RFC v6 04/16] net: dsa: replay master state events in dsa_tree_{setup,teardown}_master Ansuel Smith
2021-12-14 22:43 ` [net-next PATCH RFC v6 05/16] net: dsa: tag_qca: convert to FIELD macro Ansuel Smith
2021-12-14 22:43 ` [net-next PATCH RFC v6 06/16] net: dsa: tag_qca: move define to include linux/dsa Ansuel Smith
2021-12-14 22:44 ` [net-next PATCH RFC v6 07/16] net: dsa: tag_qca: enable promisc_on_master flag Ansuel Smith
2021-12-15  9:58   ` Vladimir Oltean
2021-12-14 22:44 ` [net-next PATCH RFC v6 08/16] net: dsa: tag_qca: add define for handling mdio Ethernet packet Ansuel Smith
2021-12-15  9:58   ` Vladimir Oltean
2021-12-14 22:44 ` [net-next PATCH RFC v6 09/16] net: dsa: tag_qca: add define for handling MIB packet Ansuel Smith
2021-12-14 22:44 ` [net-next PATCH RFC v6 10/16] net: dsa: tag_qca: add support for handling mdio Ethernet and " Ansuel Smith
2021-12-15  9:54   ` Vladimir Oltean
2021-12-14 22:44 ` [net-next PATCH RFC v6 11/16] net: dsa: qca8k: add tracking state of master port Ansuel Smith
2021-12-15  9:51   ` Vladimir Oltean
2021-12-16  0:00     ` Ansuel Smith
2021-12-14 22:44 ` [net-next PATCH RFC v6 12/16] net: dsa: qca8k: add support for mdio read/write in Ethernet packet Ansuel Smith
2021-12-15  9:49   ` Vladimir Oltean
2021-12-15 16:53     ` Ansuel Smith
2021-12-15 12:47   ` Vladimir Oltean
2021-12-15 16:56     ` Ansuel Smith
2021-12-14 22:44 ` [net-next PATCH RFC v6 13/16] net: dsa: qca8k: add support for mib autocast " Ansuel Smith
2021-12-14 22:44 ` [net-next PATCH RFC v6 14/16] net: dsa: qca8k: add support for phy read/write with mdio Ethernet Ansuel Smith
2021-12-14 22:44 ` [net-next PATCH RFC v6 15/16] net: dsa: qca8k: move page cache to driver priv Ansuel Smith
2021-12-14 22:44 ` Ansuel Smith [this message]
2021-12-14 23:34 ` [net-next PATCH RFC v6 00/16] Add support for qca8k mdio rw in Ethernet packet Ansuel Smith
2021-12-15 10:26 ` Vladimir Oltean
2021-12-15 16:34   ` Ansuel Smith
2021-12-16 23:38     ` Vladimir Oltean
2022-01-06 20:56       ` Ansuel Smith
2022-01-07 17:17         ` Vladimir Oltean

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211214224409.5770-17-ansuelsmth@gmail.com \
    --to=ansuelsmth@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=vivien.didelot@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).