From: Ansuel Smith <ansuelsmth@gmail.com>
To: Andrew Lunn <andrew@lunn.ch>,
Vivien Didelot <vivien.didelot@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org
Cc: Vladimir Oltean <vladimir.oltean@nxp.com>,
Ansuel Smith <ansuelsmth@gmail.com>
Subject: [net-next PATCH RFC v6 01/16] net: dsa: provide switch operations for tracking the master state
Date: Tue, 14 Dec 2021 23:43:54 +0100 [thread overview]
Message-ID: <20211214224409.5770-2-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20211214224409.5770-1-ansuelsmth@gmail.com>
From: Vladimir Oltean <vladimir.oltean@nxp.com>
Certain drivers may need to send management traffic to the switch for
things like register access, FDB dump, etc, to accelerate what their
slow bus (SPI, I2C, MDIO) can already do.
Ethernet is faster (especially in bulk transactions) but is also more
unreliable, since the user may decide to bring the DSA master down (or
not bring it up), therefore severing the link between the host and the
attached switch.
Drivers needing Ethernet-based register access already should have
fallback logic to the slow bus if the Ethernet method fails, but that
fallback may be based on a timeout, and the I/O to the switch may slow
down to a halt if the master is down, because every Ethernet packet will
have to time out. The driver also doesn't have the option to turn off
Ethernet-based I/O momentarily, because it wouldn't know when to turn it
back on.
Which is where this change comes in. By tracking NETDEV_CHANGE,
NETDEV_UP and NETDEV_GOING_DOWN events on the DSA master, we should know
the exact interval of time during which this interface is reliably
available for traffic. Provide this information to switches so they can
use it as they wish.
An helper is added dsa_port_master_is_operational() to check if a master
port is operational.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
include/net/dsa.h | 17 +++++++++++++++++
net/dsa/dsa2.c | 46 ++++++++++++++++++++++++++++++++++++++++++++++
net/dsa/dsa_priv.h | 13 +++++++++++++
net/dsa/slave.c | 32 ++++++++++++++++++++++++++++++++
net/dsa/switch.c | 15 +++++++++++++++
5 files changed, 123 insertions(+)
diff --git a/include/net/dsa.h b/include/net/dsa.h
index f16959444ae1..70a1f21e4473 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -292,6 +292,10 @@ struct dsa_port {
struct list_head fdbs;
struct list_head mdbs;
+ /* Master state bits, valid only on CPU ports */
+ u8 master_admin_up:1,
+ master_oper_up:1;
+
bool setup;
};
@@ -458,6 +462,12 @@ static inline bool dsa_port_is_unused(struct dsa_port *dp)
return dp->type == DSA_PORT_TYPE_UNUSED;
}
+static inline bool dsa_port_master_is_operational(struct dsa_port *dp)
+{
+ return dsa_port_is_cpu(dp) && dp->master_admin_up &&
+ dp->master_oper_up;
+}
+
static inline bool dsa_is_unused_port(struct dsa_switch *ds, int p)
{
return dsa_to_port(ds, p)->type == DSA_PORT_TYPE_UNUSED;
@@ -1016,6 +1026,13 @@ struct dsa_switch_ops {
int (*tag_8021q_vlan_add)(struct dsa_switch *ds, int port, u16 vid,
u16 flags);
int (*tag_8021q_vlan_del)(struct dsa_switch *ds, int port, u16 vid);
+
+ /*
+ * DSA master tracking operations
+ */
+ void (*master_state_change)(struct dsa_switch *ds,
+ const struct net_device *master,
+ bool operational);
};
#define DSA_DEVLINK_PARAM_DRIVER(_id, _name, _type, _cmodes) \
diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c
index c18b22c0bf55..eb466e92069c 100644
--- a/net/dsa/dsa2.c
+++ b/net/dsa/dsa2.c
@@ -1244,6 +1244,52 @@ int dsa_tree_change_tag_proto(struct dsa_switch_tree *dst,
return err;
}
+static void dsa_tree_master_state_change(struct dsa_switch_tree *dst,
+ struct net_device *master)
+{
+ struct dsa_notifier_master_state_info info;
+ struct dsa_port *cpu_dp = master->dsa_ptr;
+
+ info.master = master;
+ info.operational = dsa_port_master_is_operational(cpu_dp);
+
+ dsa_tree_notify(dst, DSA_NOTIFIER_MASTER_STATE_CHANGE, &info);
+}
+
+void dsa_tree_master_admin_state_change(struct dsa_switch_tree *dst,
+ struct net_device *master,
+ bool up)
+{
+ struct dsa_port *cpu_dp = master->dsa_ptr;
+ bool notify = false;
+
+ if ((dsa_port_master_is_operational(cpu_dp)) !=
+ (up && cpu_dp->master_oper_up))
+ notify = true;
+
+ cpu_dp->master_admin_up = up;
+
+ if (notify)
+ dsa_tree_master_state_change(dst, master);
+}
+
+void dsa_tree_master_oper_state_change(struct dsa_switch_tree *dst,
+ struct net_device *master,
+ bool up)
+{
+ struct dsa_port *cpu_dp = master->dsa_ptr;
+ bool notify = false;
+
+ if ((dsa_port_master_is_operational(cpu_dp)) !=
+ (cpu_dp->master_admin_up && up))
+ notify = true;
+
+ cpu_dp->master_oper_up = up;
+
+ if (notify)
+ dsa_tree_master_state_change(dst, master);
+}
+
static struct dsa_port *dsa_port_touch(struct dsa_switch *ds, int index)
{
struct dsa_switch_tree *dst = ds->dst;
diff --git a/net/dsa/dsa_priv.h b/net/dsa/dsa_priv.h
index edfaae7b5967..1566064ccfe2 100644
--- a/net/dsa/dsa_priv.h
+++ b/net/dsa/dsa_priv.h
@@ -45,6 +45,7 @@ enum {
DSA_NOTIFIER_MRP_DEL_RING_ROLE,
DSA_NOTIFIER_TAG_8021Q_VLAN_ADD,
DSA_NOTIFIER_TAG_8021Q_VLAN_DEL,
+ DSA_NOTIFIER_MASTER_STATE_CHANGE,
};
/* DSA_NOTIFIER_AGEING_TIME */
@@ -128,6 +129,12 @@ struct dsa_notifier_tag_8021q_vlan_info {
u16 vid;
};
+/* DSA_NOTIFIER_MASTER_STATE_CHANGE */
+struct dsa_notifier_master_state_info {
+ const struct net_device *master;
+ bool operational;
+};
+
struct dsa_switchdev_event_work {
struct dsa_switch *ds;
int port;
@@ -508,6 +515,12 @@ int dsa_tree_change_tag_proto(struct dsa_switch_tree *dst,
struct net_device *master,
const struct dsa_device_ops *tag_ops,
const struct dsa_device_ops *old_tag_ops);
+void dsa_tree_master_admin_state_change(struct dsa_switch_tree *dst,
+ struct net_device *master,
+ bool up);
+void dsa_tree_master_oper_state_change(struct dsa_switch_tree *dst,
+ struct net_device *master,
+ bool up);
unsigned int dsa_bridge_num_get(const struct net_device *bridge_dev, int max);
void dsa_bridge_num_put(const struct net_device *bridge_dev,
unsigned int bridge_num);
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 88f7b8686dac..9dfcfc5dae0a 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -2348,6 +2348,36 @@ static int dsa_slave_netdevice_event(struct notifier_block *nb,
err = dsa_port_lag_change(dp, info->lower_state_info);
return notifier_from_errno(err);
}
+ case NETDEV_CHANGE:
+ case NETDEV_UP: {
+ /* Track state of master port.
+ * DSA driver may require the master port (and indirectly
+ * the tagger) to be available for some special operation.
+ */
+ if (netdev_uses_dsa(dev)) {
+ struct dsa_port *cpu_dp = dev->dsa_ptr;
+ struct dsa_switch_tree *dst = cpu_dp->ds->dst;
+
+ /* Track when the master port is UP */
+ dsa_tree_master_oper_state_change(dst, dev,
+ netif_oper_up(dev));
+
+ /* Track when the master port is ready and can accept
+ * packet.
+ * NETDEV_UP event is not enough to flag a port as ready.
+ * We also have to wait for linkwatch_do_dev to dev_activate
+ * and emit a NETDEV_CHANGE event.
+ * We check if a master port is ready by checking if the dev
+ * have a qdisc assigned and is not noop.
+ */
+ dsa_tree_master_admin_state_change(dst, dev,
+ !qdisc_tx_is_noop(dev));
+
+ return NOTIFY_OK;
+ }
+
+ return NOTIFY_DONE;
+ }
case NETDEV_GOING_DOWN: {
struct dsa_port *dp, *cpu_dp;
struct dsa_switch_tree *dst;
@@ -2359,6 +2389,8 @@ static int dsa_slave_netdevice_event(struct notifier_block *nb,
cpu_dp = dev->dsa_ptr;
dst = cpu_dp->ds->dst;
+ dsa_tree_master_admin_state_change(dst, dev, false);
+
list_for_each_entry(dp, &dst->ports, list) {
if (!dsa_port_is_user(dp))
continue;
diff --git a/net/dsa/switch.c b/net/dsa/switch.c
index 393f2d8a860a..726bb5ca1183 100644
--- a/net/dsa/switch.c
+++ b/net/dsa/switch.c
@@ -753,6 +753,18 @@ dsa_switch_mrp_del_ring_role(struct dsa_switch *ds,
return 0;
}
+static int
+dsa_switch_master_state_change(struct dsa_switch *ds,
+ struct dsa_notifier_master_state_info *info)
+{
+ if (!ds->ops->master_state_change)
+ return 0;
+
+ ds->ops->master_state_change(ds, info->master, info->operational);
+
+ return 0;
+}
+
static int dsa_switch_event(struct notifier_block *nb,
unsigned long event, void *info)
{
@@ -844,6 +856,9 @@ static int dsa_switch_event(struct notifier_block *nb,
case DSA_NOTIFIER_TAG_8021Q_VLAN_DEL:
err = dsa_switch_tag_8021q_vlan_del(ds, info);
break;
+ case DSA_NOTIFIER_MASTER_STATE_CHANGE:
+ err = dsa_switch_master_state_change(ds, info);
+ break;
default:
err = -EOPNOTSUPP;
break;
--
2.33.1
next prev parent reply other threads:[~2021-12-14 22:44 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-14 22:43 [net-next PATCH RFC v6 00/16] Add support for qca8k mdio rw in Ethernet packet Ansuel Smith
2021-12-14 22:43 ` Ansuel Smith [this message]
2021-12-14 22:43 ` [net-next PATCH RFC v6 02/16] net: dsa: stop updating master MTU from master.c Ansuel Smith
2021-12-14 22:43 ` [net-next PATCH RFC v6 03/16] net: dsa: hold rtnl_mutex when calling dsa_master_{setup,teardown} Ansuel Smith
2021-12-14 22:43 ` [net-next PATCH RFC v6 04/16] net: dsa: replay master state events in dsa_tree_{setup,teardown}_master Ansuel Smith
2021-12-14 22:43 ` [net-next PATCH RFC v6 05/16] net: dsa: tag_qca: convert to FIELD macro Ansuel Smith
2021-12-14 22:43 ` [net-next PATCH RFC v6 06/16] net: dsa: tag_qca: move define to include linux/dsa Ansuel Smith
2021-12-14 22:44 ` [net-next PATCH RFC v6 07/16] net: dsa: tag_qca: enable promisc_on_master flag Ansuel Smith
2021-12-15 9:58 ` Vladimir Oltean
2021-12-14 22:44 ` [net-next PATCH RFC v6 08/16] net: dsa: tag_qca: add define for handling mdio Ethernet packet Ansuel Smith
2021-12-15 9:58 ` Vladimir Oltean
2021-12-14 22:44 ` [net-next PATCH RFC v6 09/16] net: dsa: tag_qca: add define for handling MIB packet Ansuel Smith
2021-12-14 22:44 ` [net-next PATCH RFC v6 10/16] net: dsa: tag_qca: add support for handling mdio Ethernet and " Ansuel Smith
2021-12-15 9:54 ` Vladimir Oltean
2021-12-14 22:44 ` [net-next PATCH RFC v6 11/16] net: dsa: qca8k: add tracking state of master port Ansuel Smith
2021-12-15 9:51 ` Vladimir Oltean
2021-12-16 0:00 ` Ansuel Smith
2021-12-14 22:44 ` [net-next PATCH RFC v6 12/16] net: dsa: qca8k: add support for mdio read/write in Ethernet packet Ansuel Smith
2021-12-15 9:49 ` Vladimir Oltean
2021-12-15 16:53 ` Ansuel Smith
2021-12-15 12:47 ` Vladimir Oltean
2021-12-15 16:56 ` Ansuel Smith
2021-12-14 22:44 ` [net-next PATCH RFC v6 13/16] net: dsa: qca8k: add support for mib autocast " Ansuel Smith
2021-12-14 22:44 ` [net-next PATCH RFC v6 14/16] net: dsa: qca8k: add support for phy read/write with mdio Ethernet Ansuel Smith
2021-12-14 22:44 ` [net-next PATCH RFC v6 15/16] net: dsa: qca8k: move page cache to driver priv Ansuel Smith
2021-12-14 22:44 ` [net-next PATCH RFC v6 16/16] net: dsa: qca8k: cache lo and hi for mdio write Ansuel Smith
2021-12-14 23:34 ` [net-next PATCH RFC v6 00/16] Add support for qca8k mdio rw in Ethernet packet Ansuel Smith
2021-12-15 10:26 ` Vladimir Oltean
2021-12-15 16:34 ` Ansuel Smith
2021-12-16 23:38 ` Vladimir Oltean
2022-01-06 20:56 ` Ansuel Smith
2022-01-07 17:17 ` Vladimir Oltean
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211214224409.5770-2-ansuelsmth@gmail.com \
--to=ansuelsmth@gmail.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=vivien.didelot@gmail.com \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).