From: Amit Cohen <amcohen@nvidia.com>
To: <netdev@vger.kernel.org>
Cc: <davem@davemloft.net>, <kuba@kernel.org>, <mlxsw@nvidia.com>,
<idosch@nvidia.com>, Amit Cohen <amcohen@nvidia.com>,
Petr Machata <petrm@nvidia.com>
Subject: [PATCH net-next 2/8] selftests: mlxsw: Add VxLAN configuration test for IPv6
Date: Thu, 23 Dec 2021 09:29:56 +0200 [thread overview]
Message-ID: <20211223073002.3733510-3-amcohen@nvidia.com> (raw)
In-Reply-To: <20211223073002.3733510-1-amcohen@nvidia.com>
Add test to verify configuration of VxLAN with IPv6 underlay.
Use the existing test which checks IPv4.
Add separated test cases for learning which is not supported for IPv6
and for UDP checksum flags which are different from IPv4 flags.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
---
.../selftests/drivers/net/mlxsw/vxlan_ipv6.sh | 65 +++++++++++++++++++
1 file changed, 65 insertions(+)
create mode 100755 tools/testing/selftests/drivers/net/mlxsw/vxlan_ipv6.sh
diff --git a/tools/testing/selftests/drivers/net/mlxsw/vxlan_ipv6.sh b/tools/testing/selftests/drivers/net/mlxsw/vxlan_ipv6.sh
new file mode 100755
index 000000000000..f2ea0163ddea
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/vxlan_ipv6.sh
@@ -0,0 +1,65 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# A wrapper to run VXLAN test for IPv6.
+
+ADDR_FAMILY=ipv6
+LOCAL_IP_1=2001:db8:1::1
+LOCAL_IP_2=2001:db8:1::2
+PREFIX_LEN=128
+UDPCSUM_FLAFS="udp6zerocsumrx udp6zerocsumtx"
+MC_IP=FF02::2
+IP_FLAG="-6"
+
+ALL_TESTS="
+ sanitization_test
+ offload_indication_test
+ sanitization_vlan_aware_test
+ offload_indication_vlan_aware_test
+"
+
+sanitization_single_dev_learning_enabled_ipv6_test()
+{
+ RET=0
+
+ ip link add dev br0 type bridge mcast_snooping 0
+
+ ip link add name vxlan0 up type vxlan id 10 learning $UDPCSUM_FLAFS \
+ ttl 20 tos inherit local $LOCAL_IP_1 dstport 4789
+
+ sanitization_single_dev_test_fail
+
+ ip link del dev vxlan0
+ ip link del dev br0
+
+ log_test "vxlan device with learning enabled"
+}
+
+sanitization_single_dev_udp_checksum_ipv6_test()
+{
+ RET=0
+
+ ip link add dev br0 type bridge mcast_snooping 0
+
+ ip link add name vxlan0 up type vxlan id 10 nolearning \
+ noudp6zerocsumrx udp6zerocsumtx ttl 20 tos inherit \
+ local $LOCAL_IP_1 dstport 4789
+
+ sanitization_single_dev_test_fail
+ log_test "vxlan device without zero udp checksum at RX"
+
+ ip link del dev vxlan0
+
+ ip link add name vxlan0 up type vxlan id 10 nolearning \
+ udp6zerocsumrx noudp6zerocsumtx ttl 20 tos inherit \
+ local $LOCAL_IP_1 dstport 4789
+
+ sanitization_single_dev_test_fail
+ log_test "vxlan device without zero udp checksum at TX"
+
+ ip link del dev vxlan0
+ ip link del dev br0
+
+}
+
+source vxlan.sh
--
2.31.1
next prev parent reply other threads:[~2021-12-23 7:30 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-23 7:29 [PATCH net-next 0/8] mlxsw: Add tests for VxLAN with IPv6 underlay Amit Cohen
2021-12-23 7:29 ` [PATCH net-next 1/8] selftests: mlxsw: vxlan: Make the test more flexible for future use Amit Cohen
2021-12-23 7:29 ` Amit Cohen [this message]
2021-12-23 7:29 ` [PATCH net-next 3/8] selftests: mlxsw: vxlan_fdb_veto: " Amit Cohen
2021-12-23 7:29 ` [PATCH net-next 4/8] selftests: mlxsw: Add VxLAN FDB veto test for IPv6 Amit Cohen
2021-12-23 7:29 ` [PATCH net-next 5/8] selftests: mlxsw: spectrum: Add a test for VxLAN flooding with IPv6 Amit Cohen
2021-12-23 7:30 ` [PATCH net-next 6/8] selftests: mlxsw: spectrum-2: " Amit Cohen
2021-12-23 7:30 ` [PATCH net-next 7/8] selftests: mlxsw: Add test for VxLAN related traps for IPv6 Amit Cohen
2021-12-23 7:30 ` [PATCH net-next 8/8] selftests: mlxsw: devlink_trap_tunnel_vxlan: Fix 'decap_error' case Amit Cohen
2021-12-23 11:30 ` [PATCH net-next 0/8] mlxsw: Add tests for VxLAN with IPv6 underlay patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211223073002.3733510-3-amcohen@nvidia.com \
--to=amcohen@nvidia.com \
--cc=davem@davemloft.net \
--cc=idosch@nvidia.com \
--cc=kuba@kernel.org \
--cc=mlxsw@nvidia.com \
--cc=netdev@vger.kernel.org \
--cc=petrm@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).