netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Pavel Skripkin <paskripkin@gmail.com>
Cc: davem@davemloft.net, kuba@kernel.org, linux@rempel-privat.de,
	andrew@lunn.ch, oneukum@suse.com, robert.foss@collabora.com,
	freddy@asix.com.tw, linux-usb@vger.kernel.org,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	syzbot+6ca9f7867b77c2d316ac@syzkaller.appspotmail.com
Subject: Re: [PATCH RFT] net: asix: add proper error handling of usb read errors
Date: Wed, 5 Jan 2022 15:15:35 +0100	[thread overview]
Message-ID: <20220105141535.GI303@pengutronix.de> (raw)
In-Reply-To: <20220105131952.15693-1-paskripkin@gmail.com>

On Wed, Jan 05, 2022 at 04:19:52PM +0300, Pavel Skripkin wrote:
> Syzbot once again hit uninit value in asix driver. The problem still the
> same -- asix_read_cmd() reads less bytes, than was requested by caller.
> 
> Since all read requests are performed via asix_read_cmd() let's catch
> usb related error there and add __must_check notation to be sure all
> callers actually check return value.
> 
> So, this patch adds sanity check inside asix_read_cmd(), that simply
> checks if bytes read are not less, than was requested and adds missing
> error handling of asix_read_cmd() all across the driver code.
> 
> Fixes: d9fe64e51114 ("net: asix: Add in_pm parameter")
> Reported-and-tested-by: syzbot+6ca9f7867b77c2d316ac@syzkaller.appspotmail.com
> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>

Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>

Thank you!

> ---
>  drivers/net/usb/asix.h         |  4 ++--
>  drivers/net/usb/asix_common.c  | 19 +++++++++++++------
>  drivers/net/usb/asix_devices.c | 21 ++++++++++++++++++---
>  3 files changed, 33 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/net/usb/asix.h b/drivers/net/usb/asix.h
> index 2a1e31defe71..4334aafab59a 100644
> --- a/drivers/net/usb/asix.h
> +++ b/drivers/net/usb/asix.h
> @@ -192,8 +192,8 @@ extern const struct driver_info ax88172a_info;
>  /* ASIX specific flags */
>  #define FLAG_EEPROM_MAC		(1UL << 0)  /* init device MAC from eeprom */
>  
> -int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
> -		  u16 size, void *data, int in_pm);
> +int __must_check asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
> +			       u16 size, void *data, int in_pm);
>  
>  int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
>  		   u16 size, void *data, int in_pm);
> diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c
> index 71682970be58..524805285019 100644
> --- a/drivers/net/usb/asix_common.c
> +++ b/drivers/net/usb/asix_common.c
> @@ -11,8 +11,8 @@
>  
>  #define AX_HOST_EN_RETRIES	30
>  
> -int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
> -		  u16 size, void *data, int in_pm)
> +int __must_check asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
> +			       u16 size, void *data, int in_pm)
>  {
>  	int ret;
>  	int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16);
> @@ -27,9 +27,12 @@ int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
>  	ret = fn(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
>  		 value, index, data, size);
>  
> -	if (unlikely(ret < 0))
> +	if (unlikely(ret < size)) {
> +		ret = ret < 0 ? ret : -ENODATA;
> +
>  		netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n",
>  			    index, ret);
> +	}
>  
>  	return ret;
>  }
> @@ -79,7 +82,7 @@ static int asix_check_host_enable(struct usbnet *dev, int in_pm)
>  				    0, 0, 1, &smsr, in_pm);
>  		if (ret == -ENODEV)
>  			break;
> -		else if (ret < sizeof(smsr))
> +		else if (ret < 0)
>  			continue;
>  		else if (smsr & AX_HOST_EN)
>  			break;
> @@ -579,8 +582,12 @@ int asix_mdio_read_nopm(struct net_device *netdev, int phy_id, int loc)
>  		return ret;
>  	}
>  
> -	asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
> -		      (__u16)loc, 2, &res, 1);
> +	ret = asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
> +			    (__u16)loc, 2, &res, 1);
> +	if (ret < 0) {
> +		mutex_unlock(&dev->phy_mutex);
> +		return ret;
> +	}
>  	asix_set_hw_mii(dev, 1);
>  	mutex_unlock(&dev->phy_mutex);
>  
> diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
> index 4514d35ef4c4..6b2fbdf4e0fd 100644
> --- a/drivers/net/usb/asix_devices.c
> +++ b/drivers/net/usb/asix_devices.c
> @@ -755,7 +755,12 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
>  	priv->phy_addr = ret;
>  	priv->embd_phy = ((priv->phy_addr & 0x1f) == 0x10);
>  
> -	asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &chipcode, 0);
> +	ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &chipcode, 0);
> +	if (ret < 0) {
> +		netdev_dbg(dev->net, "Failed to read STATMNGSTS_REG: %d\n", ret);
> +		return ret;
> +	}
> +
>  	chipcode &= AX_CHIPCODE_MASK;
>  
>  	ret = (chipcode == AX_AX88772_CHIPCODE) ? ax88772_hw_reset(dev, 0) :
> @@ -920,11 +925,21 @@ static int ax88178_reset(struct usbnet *dev)
>  	int gpio0 = 0;
>  	u32 phyid;
>  
> -	asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status, 0);
> +	ret = asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status, 0);
> +	if (ret < 0) {
> +		netdev_dbg(dev->net, "Failed to read GPIOS: %d\n", ret);
> +		return ret;
> +	}
> +
>  	netdev_dbg(dev->net, "GPIO Status: 0x%04x\n", status);
>  
>  	asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0, 0, 0, NULL, 0);
> -	asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom, 0);
> +	ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom, 0);
> +	if (ret < 0) {
> +		netdev_dbg(dev->net, "Failed to read EEPROM: %d\n", ret);
> +		return ret;
> +	}
> +
>  	asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0, 0, 0, NULL, 0);
>  
>  	netdev_dbg(dev->net, "EEPROM index 0x17 is 0x%04x\n", eeprom);
> -- 
> 2.34.1
> 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

  reply	other threads:[~2022-01-05 14:15 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-05 13:19 [PATCH RFT] net: asix: add proper error handling of usb read errors Pavel Skripkin
2022-01-05 14:15 ` Oleksij Rempel [this message]
2022-01-17 19:31 ` Pavel Skripkin
2022-01-18  6:18   ` Greg KH
2022-01-18 19:00     ` Pavel Skripkin
2022-02-06 17:23 ` Pavel Skripkin
2022-02-06 17:48   ` Oleksij Rempel
2022-02-06 18:05     ` [PATCH net-next] " Pavel Skripkin
2022-02-07 10:27       ` Greg KH
2022-02-07 12:30       ` patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220105141535.GI303@pengutronix.de \
    --to=o.rempel@pengutronix.de \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=freddy@asix.com.tw \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=linux@rempel-privat.de \
    --cc=netdev@vger.kernel.org \
    --cc=oneukum@suse.com \
    --cc=paskripkin@gmail.com \
    --cc=robert.foss@collabora.com \
    --cc=syzbot+6ca9f7867b77c2d316ac@syzkaller.appspotmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).