[PATCH AUTOSEL 4.19 2/5] net: apple: mace: Fix build since dev_addr constification

[PATCH AUTOSEL 4.19 2/5] net: apple: mace: Fix build since dev_addr constification

[Sasha Levin]

From: Michael Ellerman <mpe@ellerman.id.au>

[ Upstream commit 6c8dc12cd925e5fa8c152633338b2b35c4c89258 ]

Since commit adeef3e32146 ("net: constify netdev->dev_addr") the mace
driver no longer builds with various errors (pmac32_defconfig):

  linux/drivers/net/ethernet/apple/mace.c: In function ‘mace_probe’:
  linux/drivers/net/ethernet/apple/mace.c:170:20: error: assignment of read-only location ‘*(dev->dev_addr + (sizetype)j)’
    170 |   dev->dev_addr[j] = rev ? bitrev8(addr[j]): addr[j];
        |                    ^
  linux/drivers/net/ethernet/apple/mace.c: In function ‘mace_reset’:
  linux/drivers/net/ethernet/apple/mace.c:349:32: warning: passing argument 2 of ‘__mace_set_address’ discards ‘const’ qualifier from pointer target type
    349 |     __mace_set_address(dev, dev->dev_addr);
        |                             ~~~^~~~~~~~~~
  linux/drivers/net/ethernet/apple/mace.c:93:62: note: expected ‘void *’ but argument is of type ‘const unsigned char *’
     93 | static void __mace_set_address(struct net_device *dev, void *addr);
        |                                                        ~~~~~~^~~~
  linux/drivers/net/ethernet/apple/mace.c: In function ‘__mace_set_address’:
  linux/drivers/net/ethernet/apple/mace.c:388:36: error: assignment of read-only location ‘*(dev->dev_addr + (sizetype)i)’
    388 |  out_8(&mb->padr, dev->dev_addr[i] = p[i]);
        |                                    ^

Fix it by making the modifications to a local macaddr variable and then
passing that to eth_hw_addr_set(), as well as adding some missing const
qualifiers.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/apple/mace.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/apple/mace.c b/drivers/net/ethernet/apple/mace.c
index 68b9ee4894892..68d85b236953b 100644
--- a/drivers/net/ethernet/apple/mace.c
+++ b/drivers/net/ethernet/apple/mace.c
@@ -89,7 +89,7 @@ static void mace_set_timeout(struct net_device *dev);
 static void mace_tx_timeout(struct timer_list *t);
 static inline void dbdma_reset(volatile struct dbdma_regs __iomem *dma);
 static inline void mace_clean_rings(struct mace_data *mp);
-static void __mace_set_address(struct net_device *dev, void *addr);
+static void __mace_set_address(struct net_device *dev, const void *addr);
 
 /*
  * If we can't get a skbuff when we need it, we use this area for DMA.
@@ -111,6 +111,7 @@ static int mace_probe(struct macio_dev *mdev, const struct of_device_id *match)
 	struct net_device *dev;
 	struct mace_data *mp;
 	const unsigned char *addr;
+	u8 macaddr[ETH_ALEN];
 	int j, rev, rc = -EBUSY;
 
 	if (macio_resource_count(mdev) != 3 || macio_irq_count(mdev) != 3) {
@@ -166,8 +167,9 @@ static int mace_probe(struct macio_dev *mdev, const struct of_device_id *match)
 
 	rev = addr[0] == 0 && addr[1] == 0xA0;
 	for (j = 0; j < 6; ++j) {
-		dev->dev_addr[j] = rev ? bitrev8(addr[j]): addr[j];
+		macaddr[j] = rev ? bitrev8(addr[j]): addr[j];
 	}
+	eth_hw_addr_set(dev, macaddr);
 	mp->chipid = (in_8(&mp->mace->chipid_hi) << 8) |
 			in_8(&mp->mace->chipid_lo);
 
@@ -368,11 +370,12 @@ static void mace_reset(struct net_device *dev)
     	out_8(&mb->plscc, PORTSEL_GPSI + ENPLSIO);
 }
 
-static void __mace_set_address(struct net_device *dev, void *addr)
+static void __mace_set_address(struct net_device *dev, const void *addr)
 {
     struct mace_data *mp = netdev_priv(dev);
     volatile struct mace __iomem *mb = mp->mace;
-    unsigned char *p = addr;
+    const unsigned char *p = addr;
+    u8 macaddr[ETH_ALEN];
     int i;
 
     /* load up the hardware address */
@@ -384,7 +387,10 @@ static void __mace_set_address(struct net_device *dev, void *addr)
 	    ;
     }
     for (i = 0; i < 6; ++i)
-	out_8(&mb->padr, dev->dev_addr[i] = p[i]);
+        out_8(&mb->padr, macaddr[i] = p[i]);
+
+    eth_hw_addr_set(dev, macaddr);
+
     if (mp->chipid != BROKEN_ADDRCHG_REV)
         out_8(&mb->iac, 0);
 }
-- 
2.34.1

[PATCH AUTOSEL 4.19 3/5] net: apple: bmac: Fix build since dev_addr constification

[Sasha Levin]

From: Michael Ellerman <mpe@ellerman.id.au>

[ Upstream commit ea938248557a52e231a31f338eac4baee36a8626 ]

Since commit adeef3e32146 ("net: constify netdev->dev_addr") the bmac
driver no longer builds with the following errors (pmac32_defconfig):

  linux/drivers/net/ethernet/apple/bmac.c: In function ‘bmac_probe’:
  linux/drivers/net/ethernet/apple/bmac.c:1287:20: error: assignment of read-only location ‘*(dev->dev_addr + (sizetype)j)’
   1287 |   dev->dev_addr[j] = rev ? bitrev8(addr[j]): addr[j];
        |                    ^

Fix it by making the modifications to a local macaddr variable and then
passing that to eth_hw_addr_set().

We don't use the existing addr variable because the bitrev8() would
mutate it, but it is already used unreversed later in the function.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/apple/bmac.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/apple/bmac.c b/drivers/net/ethernet/apple/bmac.c
index ab6ce85540b8a..157ad5b81c730 100644
--- a/drivers/net/ethernet/apple/bmac.c
+++ b/drivers/net/ethernet/apple/bmac.c
@@ -1239,6 +1239,7 @@ static int bmac_probe(struct macio_dev *mdev, const struct of_device_id *match)
 	struct bmac_data *bp;
 	const unsigned char *prop_addr;
 	unsigned char addr[6];
+	u8 macaddr[6];
 	struct net_device *dev;
 	int is_bmac_plus = ((int)match->data) != 0;
 
@@ -1286,7 +1287,9 @@ static int bmac_probe(struct macio_dev *mdev, const struct of_device_id *match)
 
 	rev = addr[0] == 0 && addr[1] == 0xA0;
 	for (j = 0; j < 6; ++j)
-		dev->dev_addr[j] = rev ? bitrev8(addr[j]): addr[j];
+		macaddr[j] = rev ? bitrev8(addr[j]): addr[j];
+
+	eth_hw_addr_set(dev, macaddr);
 
 	/* Enable chip without interrupts for now */
 	bmac_enable_and_reset_chip(dev);
-- 
2.34.1

[PATCH AUTOSEL 4.19 5/5] vhost/test: fix memory leak of vhost virtqueues

[Sasha Levin]

From: Xianting Tian <xianting.tian@linux.alibaba.com>

[ Upstream commit 080063920777af65105e5953e2851e036376e3ea ]

We need free the vqs in .release(), which are allocated in .open().

Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Link: https://lore.kernel.org/r/20211228030924.3468439-1-xianting.tian@linux.alibaba.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vhost/test.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/vhost/test.c b/drivers/vhost/test.c
index 55090d9f9de0d..2d6abe1c0dbec 100644
--- a/drivers/vhost/test.c
+++ b/drivers/vhost/test.c
@@ -167,6 +167,7 @@ static int vhost_test_release(struct inode *inode, struct file *f)
 	/* We do an extra flush before freeing memory,
 	 * since jobs can re-queue themselves. */
 	vhost_test_flush(n);
+	kfree(n->dev.vqs);
 	kfree(n);
 	return 0;
 }
-- 
2.34.1