netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jisheng Zhang <jszhang@kernel.org>
To: Giuseppe Cavallaro <peppe.cavallaro@st.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Jose Abreu <joabreu@synopsys.com>,
	"David S . Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: netdev@vger.kernel.org, linux-sunxi@lists.linux.dev,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH net-next] net: stmmac: dwmac-sun8i: make clk really gated during rpm suspended
Date: Fri, 28 Jan 2022 22:52:13 +0800	[thread overview]
Message-ID: <20220128145213.2454-1-jszhang@kernel.org> (raw)

Currently, the dwmac-sun8i's stmmaceth clk isn't disabled even if the
the device has been runtime suspended. The reason is the driver gets
the "stmmaceth" clk as tx_clk and enabling it during probe. But
there's no other usage of tx_clk except preparing and enabling, so
we can remove tx_clk and its usage then rely on the common routine
stmmac_probe_config_dt() to prepare and enable the stmmaceth clk
during driver initialization, and benefit from the runtime pm feature
after probed.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
---
 .../net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 30 +++++++------------
 1 file changed, 11 insertions(+), 19 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index 09644ab0d87a..f86cc83003f2 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -16,6 +16,7 @@
 #include <linux/of_net.h>
 #include <linux/phy.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
 #include <linux/regmap.h>
 #include <linux/stmmac.h>
@@ -57,7 +58,6 @@ struct emac_variant {
 };
 
 /* struct sunxi_priv_data - hold all sunxi private data
- * @tx_clk:	reference to MAC TX clock
  * @ephy_clk:	reference to the optional EPHY clock for the internal PHY
  * @regulator:	reference to the optional regulator
  * @rst_ephy:	reference to the optional EPHY reset for the internal PHY
@@ -68,7 +68,6 @@ struct emac_variant {
  * @mux_handle:	Internal pointer used by mdio-mux lib
  */
 struct sunxi_priv_data {
-	struct clk *tx_clk;
 	struct clk *ephy_clk;
 	struct regulator *regulator;
 	struct reset_control *rst_ephy;
@@ -579,22 +578,14 @@ static int sun8i_dwmac_init(struct platform_device *pdev, void *priv)
 		}
 	}
 
-	ret = clk_prepare_enable(gmac->tx_clk);
-	if (ret) {
-		dev_err(&pdev->dev, "Could not enable AHB clock\n");
-		goto err_disable_regulator;
-	}
-
 	if (gmac->use_internal_phy) {
 		ret = sun8i_dwmac_power_internal_phy(netdev_priv(ndev));
 		if (ret)
-			goto err_disable_clk;
+			goto err_disable_regulator;
 	}
 
 	return 0;
 
-err_disable_clk:
-	clk_disable_unprepare(gmac->tx_clk);
 err_disable_regulator:
 	if (gmac->regulator)
 		regulator_disable(gmac->regulator);
@@ -1043,8 +1034,6 @@ static void sun8i_dwmac_exit(struct platform_device *pdev, void *priv)
 	if (gmac->variant->soc_has_internal_phy)
 		sun8i_dwmac_unpower_internal_phy(gmac);
 
-	clk_disable_unprepare(gmac->tx_clk);
-
 	if (gmac->regulator)
 		regulator_disable(gmac->regulator);
 }
@@ -1167,12 +1156,6 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	gmac->tx_clk = devm_clk_get(dev, "stmmaceth");
-	if (IS_ERR(gmac->tx_clk)) {
-		dev_err(dev, "Could not get TX clock\n");
-		return PTR_ERR(gmac->tx_clk);
-	}
-
 	/* Optional regulator for PHY */
 	gmac->regulator = devm_regulator_get_optional(dev, "phy");
 	if (IS_ERR(gmac->regulator)) {
@@ -1254,6 +1237,12 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
 	ndev = dev_get_drvdata(&pdev->dev);
 	priv = netdev_priv(ndev);
 
+	/* the MAC is runtime suspended after stmmac_dvr_probe(), so we
+	 * need to ensure the MAC resume back before other operations such
+	 * as reset.
+	 */
+	pm_runtime_get_sync(&pdev->dev);
+
 	/* The mux must be registered after parent MDIO
 	 * so after stmmac_dvr_probe()
 	 */
@@ -1272,12 +1261,15 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
 			goto dwmac_remove;
 	}
 
+	pm_runtime_put(&pdev->dev);
+
 	return 0;
 
 dwmac_mux:
 	reset_control_put(gmac->rst_ephy);
 	clk_put(gmac->ephy_clk);
 dwmac_remove:
+	pm_runtime_put_noidle(&pdev->dev);
 	stmmac_dvr_remove(&pdev->dev);
 dwmac_exit:
 	sun8i_dwmac_exit(pdev, gmac);
-- 
2.34.1


             reply	other threads:[~2022-01-28 14:59 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-28 14:52 Jisheng Zhang [this message]
2022-01-28 15:20 ` [PATCH net-next] net: stmmac: dwmac-sun8i: make clk really gated during rpm suspended patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220128145213.2454-1-jszhang@kernel.org \
    --to=jszhang@kernel.org \
    --cc=alexandre.torgue@foss.st.com \
    --cc=davem@davemloft.net \
    --cc=jernej.skrabec@gmail.com \
    --cc=joabreu@synopsys.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=mripard@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=peppe.cavallaro@st.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).