netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: trix@redhat.com
To: joyce.ooi@intel.com, davem@davemloft.net, kuba@kernel.org
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	Tom Rix <trix@redhat.com>
Subject: [PATCH] net: ethernet: altera: cleanup comments
Date: Tue, 15 Feb 2022 13:38:02 -0800	[thread overview]
Message-ID: <20220215213802.3043178-1-trix@redhat.com> (raw)

From: Tom Rix <trix@redhat.com>

Replacements:
queueing to queuing
trasfer to transfer
aditional to additional
adaptor to adapter
transactino to transaction

Signed-off-by: Tom Rix <trix@redhat.com>
---
 drivers/net/ethernet/altera/altera_sgdma.c    | 2 +-
 drivers/net/ethernet/altera/altera_tse_main.c | 8 ++++----
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/altera/altera_sgdma.c b/drivers/net/ethernet/altera/altera_sgdma.c
index db97170da8c7..7f247ccbe6ba 100644
--- a/drivers/net/ethernet/altera/altera_sgdma.c
+++ b/drivers/net/ethernet/altera/altera_sgdma.c
@@ -513,7 +513,7 @@ static int sgdma_txbusy(struct altera_tse_private *priv)
 {
 	int delay = 0;
 
-	/* if DMA is busy, wait for current transactino to finish */
+	/* if DMA is busy, wait for current transaction to finish */
 	while ((csrrd32(priv->tx_dma_csr, sgdma_csroffs(status))
 		& SGDMA_STSREG_BUSY) && (delay++ < 100))
 		udelay(1);
diff --git a/drivers/net/ethernet/altera/altera_tse_main.c b/drivers/net/ethernet/altera/altera_tse_main.c
index 993b2fb42961..a3816264c35c 100644
--- a/drivers/net/ethernet/altera/altera_tse_main.c
+++ b/drivers/net/ethernet/altera/altera_tse_main.c
@@ -72,7 +72,7 @@ MODULE_PARM_DESC(dma_tx_num, "Number of descriptors in the TX list");
  */
 #define ALTERA_RXDMABUFFER_SIZE	2048
 
-/* Allow network stack to resume queueing packets after we've
+/* Allow network stack to resume queuing packets after we've
  * finished transmitting at least 1/4 of the packets in the queue.
  */
 #define TSE_TX_THRESH(x)	(x->tx_ring_size / 4)
@@ -390,7 +390,7 @@ static int tse_rx(struct altera_tse_private *priv, int limit)
 				   "RCV pktstatus %08X pktlength %08X\n",
 				   pktstatus, pktlength);
 
-		/* DMA trasfer from TSE starts with 2 aditional bytes for
+		/* DMA transfer from TSE starts with 2 additional bytes for
 		 * IP payload alignment. Status returned by get_rx_status()
 		 * contains DMA transfer length. Packet is 2 bytes shorter.
 		 */
@@ -1044,7 +1044,7 @@ static void altera_tse_set_mcfilterall(struct net_device *dev)
 		csrwr32(1, priv->mac_dev, tse_csroffs(hash_table) + i * 4);
 }
 
-/* Set or clear the multicast filter for this adaptor
+/* Set or clear the multicast filter for this adapter
  */
 static void tse_set_rx_mode_hashfilter(struct net_device *dev)
 {
@@ -1064,7 +1064,7 @@ static void tse_set_rx_mode_hashfilter(struct net_device *dev)
 	spin_unlock(&priv->mac_cfg_lock);
 }
 
-/* Set or clear the multicast filter for this adaptor
+/* Set or clear the multicast filter for this adapter
  */
 static void tse_set_rx_mode(struct net_device *dev)
 {
-- 
2.26.3


             reply	other threads:[~2022-02-15 21:38 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-15 21:38 trix [this message]
2022-02-17  4:40 ` [PATCH] net: ethernet: altera: cleanup comments patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220215213802.3043178-1-trix@redhat.com \
    --to=trix@redhat.com \
    --cc=davem@davemloft.net \
    --cc=joyce.ooi@intel.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).