From: Saeed Mahameed <saeed@kernel.org>
To: "David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Jason Gunthorpe <jgg@nvidia.com>
Cc: Leon Romanovsky <leonro@nvidia.com>,
linux-rdma@vger.kernel.org, netdev@vger.kernel.org,
Saeed Mahameed <saeedm@nvidia.com>
Subject: [mlx5-next 01/17] mlx5: remove usused static inlines
Date: Tue, 22 Feb 2022 21:09:16 -0800 [thread overview]
Message-ID: <20220223050932.244668-2-saeed@kernel.org> (raw)
In-Reply-To: <20220223050932.244668-1-saeed@kernel.org>
From: Jakub Kicinski <kuba@kernel.org>
mlx5 has some unused static inline helpers in include/
while at it also clean static inlines in the driver itself.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
.../ethernet/mellanox/mlx5/core/en_accel/en_accel.h | 9 ---------
drivers/net/ethernet/mellanox/mlx5/core/lib/hv_vhca.h | 7 -------
include/linux/mlx5/driver.h | 10 ----------
3 files changed, 26 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/en_accel.h b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/en_accel.h
index d964665eaa63..62cde3e87c2e 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/en_accel.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/en_accel.h
@@ -139,15 +139,6 @@ static inline bool mlx5e_accel_tx_begin(struct net_device *dev,
return true;
}
-static inline bool mlx5e_accel_tx_is_ipsec_flow(struct mlx5e_accel_tx_state *state)
-{
-#ifdef CONFIG_MLX5_EN_IPSEC
- return mlx5e_ipsec_is_tx_flow(&state->ipsec);
-#else
- return false;
-#endif
-}
-
static inline unsigned int mlx5e_accel_tx_ids_len(struct mlx5e_txqsq *sq,
struct mlx5e_accel_tx_state *state)
{
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/hv_vhca.h b/drivers/net/ethernet/mellanox/mlx5/core/lib/hv_vhca.h
index 4bad6a5fde56..f240ffe5116c 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lib/hv_vhca.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/hv_vhca.h
@@ -92,13 +92,6 @@ mlx5_hv_vhca_agent_create(struct mlx5_hv_vhca *hv_vhca,
static inline void mlx5_hv_vhca_agent_destroy(struct mlx5_hv_vhca_agent *agent)
{
}
-
-static inline int
-mlx5_hv_vhca_write_agent(struct mlx5_hv_vhca_agent *agent,
- void *buf, int len)
-{
- return 0;
-}
#endif
#endif /* __LIB_HV_VHCA_H__ */
diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h
index 78655d8d13a7..1b398c9e17b9 100644
--- a/include/linux/mlx5/driver.h
+++ b/include/linux/mlx5/driver.h
@@ -863,20 +863,10 @@ struct mlx5_hca_vport_context {
bool grh_required;
};
-static inline void *mlx5_buf_offset(struct mlx5_frag_buf *buf, int offset)
-{
- return buf->frags->buf + offset;
-}
-
#define STRUCT_FIELD(header, field) \
.struct_offset_bytes = offsetof(struct ib_unpacked_ ## header, field), \
.struct_size_bytes = sizeof((struct ib_unpacked_ ## header *)0)->field
-static inline struct mlx5_core_dev *pci2mlx5_core_dev(struct pci_dev *pdev)
-{
- return pci_get_drvdata(pdev);
-}
-
extern struct dentry *mlx5_debugfs_root;
static inline u16 fw_rev_maj(struct mlx5_core_dev *dev)
--
2.35.1
next prev parent reply other threads:[~2022-02-23 5:10 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-23 5:09 [pull request][net-next/rdma-next 00/17] mlx5-next updates 2022-02-22 Saeed Mahameed
2022-02-23 5:09 ` Saeed Mahameed [this message]
2022-02-23 23:17 ` [mlx5-next 01/17] mlx5: remove usused static inlines Jakub Kicinski
2022-02-23 23:20 ` Saeed Mahameed
2022-02-23 5:09 ` [mlx5-next 02/17] net/mlx5: Add ability to insert to specific flow group Saeed Mahameed
2022-02-23 5:09 ` [mlx5-next 03/17] net/mlx5: E-Switch, reserve and use same uplink metadata across ports Saeed Mahameed
2022-02-23 5:09 ` [mlx5-next 04/17] net/mlx5: E-switch, remove special uplink ingress ACL handling Saeed Mahameed
2022-02-23 5:09 ` [mlx5-next 05/17] net/mlx5: E-switch, add drop rule support to ingress ACL Saeed Mahameed
2022-02-23 5:09 ` [mlx5-next 06/17] net/mlx5: Lag, use local variable already defined to access E-Switch Saeed Mahameed
2022-02-23 5:09 ` [mlx5-next 07/17] net/mlx5: Lag, don't use magic numbers for ports Saeed Mahameed
2022-02-23 5:09 ` [mlx5-next 08/17] net/mlx5: Lag, record inactive state of bond device Saeed Mahameed
2022-02-23 5:09 ` [mlx5-next 09/17] net/mlx5: Lag, offload active-backup drops to hardware Saeed Mahameed
2022-02-23 5:09 ` [mlx5-next 10/17] net/mlx5: cmdif, Return value improvements Saeed Mahameed
2022-02-23 5:09 ` [mlx5-next 11/17] net/mlx5: cmdif, cmd_check refactoring Saeed Mahameed
2022-02-23 5:09 ` [mlx5-next 12/17] net/mlx5: cmdif, Add new api for command execution Saeed Mahameed
2022-02-23 5:09 ` [mlx5-next 13/17] net/mlx5: Use mlx5_cmd_do() in core create_{cq,dct} Saeed Mahameed
2022-02-23 23:20 ` Jakub Kicinski
2022-02-23 23:57 ` Saeed Mahameed
2022-02-24 2:00 ` Jakub Kicinski
2022-02-23 5:09 ` [mlx5-next 14/17] net/mlx5: cmdif, Refactor error handling and reporting of async commands Saeed Mahameed
2022-02-23 5:09 ` [mlx5-next 15/17] RDMA/mlx5: Use new command interface API Saeed Mahameed
2022-02-23 5:09 ` [mlx5-next 16/17] net/mlx5: Add reset_state field to MFRL register Saeed Mahameed
2022-02-23 5:09 ` [mlx5-next 17/17] net/mlx5: Add clarification on sync reset failure Saeed Mahameed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220223050932.244668-2-saeed@kernel.org \
--to=saeed@kernel.org \
--cc=davem@davemloft.net \
--cc=jgg@nvidia.com \
--cc=kuba@kernel.org \
--cc=leonro@nvidia.com \
--cc=linux-rdma@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=saeedm@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).