Re: [RFC 00/10] add support for fwnode in i2c mux system and sfp

["Clément Léger" <clement.leger@bootlin.com>]

Le Thu, 24 Feb 2022 15:58:04 +0100,
Hans de Goede <hdegoede@redhat.com> a écrit :

[...]

> >    can be addressed, but it's not necessarily immediate.
> > 
> > My preferred solutions would be swnode or device-tree overlays but
> > since there to is no consensus on how to add this support, how
> > can we go on with this series ?  
> 
> FWIW I think that the convert subsystems + drivers to use the fwnode
> abstraction layer + use swnode-s approach makes sense. For a bunch of
> x86/ACPI stuff like Type-C muxing/controllers/routing but also MIPI
> cameras we have already been moving in that direction since sometimes
> a bunch of info seems to be hardcoded in Windows drivers rather then
> "spelled out" in the ACPI tables so from the x86 side we are seeing
> a need to have platform glue code which replaces the hardcoding on
> the Windows side and we have been using the fwnode abstraction +
> swnodes for this, so that we can keep using the standard Linux
> abstractions/subsystems for this.
> 
> As Mark already mentioned the regulator subsystem has shown to
> be a bit problematic here, but you don't seem to need that?

Hi Hans,

Indeed, I don't need this subsystem. However, I'm still not clear why
this subsystem in particular is problematic. Just so that I can
recognize the other subsystems with the same pattern, could you explain
me why it is problematic ? 

> 
> Your i2c subsys patches looked reasonable to me. IMHO an important
> thing missing to give you some advice whether to try 1. or 3. first
> is how well / clean the move to the fwnode abstractions would work
> for the other subsystems.

Actually, I did the conversion for pinctrl, gpios, i2c, reset, clk,
syscon, mdio but did not factorized all the of code on top of fwnode
adaptation. I did it completely for mdio and reset subsystems. Porting
them to fwnode was rather straightforward, and almost all the of_* API
now have a fwnode_* variant.

While porting them to fwnode, I mainly had to modify the "register" and
the "get" interface of these subsystems. I did not touched the
enumeration part if we can call it like this and thus all the
CLK_OF_DECLARE() related stuff is left untouched.

> 
> Have you already converted other subsystems and if yes, can you
> give us a pointer to a branch somewhere with the conversion for
> other subsystems ?

All the preliminary work I did is available at the link at [1]. But as I
said, I did not converted completely all the subsystems, only reset [2]
(for which I tried to convert all the drivers and fatorized OF on top
of fwnode functions) and mdio [3] which proved to be easily portable.

I also modified the clk framework [4] but did not went to the complete
factorization of it. I converted the fixed-clk driver to see how well
it could be done. Biggest difficulty is to keep of_xlate() and
fwnode_xlate() (if we want to do so) to avoid modifying all drivers
(even though not a lot of them implements custom of_xlate() functions).

If backward compatibility is really needed, it can potentially be done,
at the cost of keeping of_xlate() member and by converting the fwnode
stuff to OF world (which is easily doable).

Conversion to fwnode API actually proved to be rather straightforward
except for some specific subsystem (syscon) which I'm not quite happy
with the outcome, but again, I wanted the community feedback before
going further in this way so there is room for improvement.

Regards,

[1] https://github.com/clementleger/linux/tree/fwnode_support
[2] https://github.com/clementleger/linux/tree/fwnode_reset
[3] https://github.com/clementleger/linux/tree/fwnode_mdio
[4] https://github.com/clementleger/linux/tree/fwnode_clk

> 
> Regards,
> 
> Hans


-- 
Clément Léger,
Embedded Linux and Kernel engineer at Bootlin
https://bootlin.com