public inbox for netdev@vger.kernel.org
 help / color / mirror / Atom feed
From: Vladimir Oltean <vladimir.oltean@nxp.com>
To: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Cc: "Alexandre Belloni" <alexandre.belloni@bootlin.com>,
	"Claudiu Manoil" <claudiu.manoil@nxp.com>,
	"Marek BehĂșn" <kabel@kernel.org>,
	"UNGLinuxDriver@microchip.com" <UNGLinuxDriver@microchip.com>,
	"Andrew Lunn" <andrew@lunn.ch>,
	"Vivien Didelot" <vivien.didelot@gmail.com>,
	"Florian Fainelli" <f.fainelli@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	"Jakub Kicinski" <kuba@kernel.org>,
	"netdev@vger.kernel.org" <netdev@vger.kernel.org>
Subject: Re: [PATCH RFC net-next 2/4] net: dsa: ocelot: remove interface checks
Date: Fri, 25 Feb 2022 15:30:59 +0000	[thread overview]
Message-ID: <20220225153059.f6hxctvj2r3ih42d@skbuf> (raw)
In-Reply-To: <E1nNbgn-00Akik-MJ@rmk-PC.armlinux.org.uk>

On Fri, Feb 25, 2022 at 02:35:21PM +0000, Russell King (Oracle) wrote:
> When the supported interfaces bitmap is populated, phylink will itself
> check that the interface mode is present in this bitmap. Drivers no
> longer need to perform this check themselves. Remove these checks.
> 
> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
> ---

Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>

>  drivers/net/dsa/ocelot/felix_vsc9959.c   | 6 ------
>  drivers/net/dsa/ocelot/seville_vsc9953.c | 6 ------
>  2 files changed, 12 deletions(-)
> 
> diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c
> index a1be0e91dde6..4c635c46705e 100644
> --- a/drivers/net/dsa/ocelot/felix_vsc9959.c
> +++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
> @@ -956,12 +956,6 @@ static void vsc9959_phylink_validate(struct ocelot *ocelot, int port,
>  	struct ocelot_port *ocelot_port = ocelot->ports[port];
>  	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
>  
> -	if (state->interface != PHY_INTERFACE_MODE_NA &&
> -	    state->interface != ocelot_port->phy_mode) {
> -		linkmode_zero(supported);
> -		return;
> -	}
> -
>  	phylink_set_port_modes(mask);
>  	phylink_set(mask, Autoneg);
>  	phylink_set(mask, Pause);
> diff --git a/drivers/net/dsa/ocelot/seville_vsc9953.c b/drivers/net/dsa/ocelot/seville_vsc9953.c
> index 2db51494b1a9..0ae8424c47e2 100644
> --- a/drivers/net/dsa/ocelot/seville_vsc9953.c
> +++ b/drivers/net/dsa/ocelot/seville_vsc9953.c
> @@ -929,12 +929,6 @@ static void vsc9953_phylink_validate(struct ocelot *ocelot, int port,
>  	struct ocelot_port *ocelot_port = ocelot->ports[port];
>  	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
>  
> -	if (state->interface != PHY_INTERFACE_MODE_NA &&
> -	    state->interface != ocelot_port->phy_mode) {
> -		linkmode_zero(supported);
> -		return;
> -	}
> -
>  	phylink_set_port_modes(mask);
>  	phylink_set(mask, Autoneg);
>  	phylink_set(mask, Pause);
> -- 
> 2.30.2
>

  parent reply	other threads:[~2022-02-25 15:31 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-25 14:34 [PATCH RFC net-next 0/4] net: dsa: ocelot: phylink updates Russell King (Oracle)
2022-02-25 14:35 ` [PATCH RFC net-next 1/4] net: dsa: ocelot: populate supported_interfaces Russell King (Oracle)
2022-02-25 15:25   ` Vladimir Oltean
2022-02-25 14:35 ` [PATCH RFC net-next 2/4] net: dsa: ocelot: remove interface checks Russell King (Oracle)
2022-02-25 14:37   ` Russell King (Oracle)
2022-02-25 15:30   ` Vladimir Oltean [this message]
2022-02-25 14:35 ` [PATCH RFC net-next 3/4] net: dsa: ocelot: convert to mac_select_pcs() Russell King (Oracle)
2022-02-25 15:31   ` Vladimir Oltean
2022-02-25 14:35 ` [PATCH RFC net-next 4/4] net: dsa: ocelot: mark as non-legacy Russell King (Oracle)
2022-02-25 15:46   ` Vladimir Oltean
2022-02-25 15:59     ` Russell King (Oracle)
2022-02-25 16:00       ` Vladimir Oltean

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220225153059.f6hxctvj2r3ih42d@skbuf \
    --to=vladimir.oltean@nxp.com \
    --cc=UNGLinuxDriver@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=andrew@lunn.ch \
    --cc=claudiu.manoil@nxp.com \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=kabel@kernel.org \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=rmk+kernel@armlinux.org.uk \
    --cc=vivien.didelot@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox