From: Ansuel Smith <ansuelsmth@gmail.com>
To: Andrew Lunn <andrew@lunn.ch>,
Vivien Didelot <vivien.didelot@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Russell King <linux@armlinux.org.uk>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Ansuel Smith <ansuelsmth@gmail.com>
Subject: [net-next PATCH v2] net: dsa: qca8k: pack driver struct and improve cache use
Date: Mon, 28 Feb 2022 12:04:08 +0100 [thread overview]
Message-ID: <20220228110408.4903-1-ansuelsmth@gmail.com> (raw)
Pack qca8k priv and other struct using pahole and set the first priv
struct entry to mgmt_master and mgmt_eth_data to speedup access.
While at it also rework pcs struct and move it qca8k_ports_config
following other configuration set for the cpu ports.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
drivers/net/dsa/qca8k.c | 8 ++++----
drivers/net/dsa/qca8k.h | 33 ++++++++++++++++-----------------
2 files changed, 20 insertions(+), 21 deletions(-)
diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index ee0dbf324268..8d059da5f0ca 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -1685,11 +1685,11 @@ qca8k_phylink_mac_select_pcs(struct dsa_switch *ds, int port,
case PHY_INTERFACE_MODE_1000BASEX:
switch (port) {
case 0:
- pcs = &priv->pcs_port_0.pcs;
+ pcs = &priv->ports_config.qpcs[QCA8K_CPU_PORT0].pcs;
break;
case 6:
- pcs = &priv->pcs_port_6.pcs;
+ pcs = &priv->ports_config.qpcs[QCA8K_CPU_PORT6].pcs;
break;
}
break;
@@ -2889,8 +2889,8 @@ qca8k_setup(struct dsa_switch *ds)
if (ret)
return ret;
- qca8k_setup_pcs(priv, &priv->pcs_port_0, 0);
- qca8k_setup_pcs(priv, &priv->pcs_port_6, 6);
+ qca8k_setup_pcs(priv, &priv->ports_config.qpcs[QCA8K_CPU_PORT0], 0);
+ qca8k_setup_pcs(priv, &priv->ports_config.qpcs[QCA8K_CPU_PORT6], 6);
/* Make sure MAC06 is disabled */
ret = regmap_clear_bits(priv->regmap, QCA8K_REG_PORT0_PAD_CTRL,
diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h
index f375627174c8..611dc2335dbe 100644
--- a/drivers/net/dsa/qca8k.h
+++ b/drivers/net/dsa/qca8k.h
@@ -341,18 +341,24 @@ enum {
struct qca8k_mgmt_eth_data {
struct completion rw_done;
- struct mutex mutex; /* Enforce one mdio read/write at time */
+ u32 data[4];
bool ack;
u32 seq;
- u32 data[4];
+ struct mutex mutex; /* Enforce one mdio read/write at time */
};
struct qca8k_mib_eth_data {
struct completion rw_done;
+ u64 *data; /* pointer to ethtool data */
+ u8 req_port;
struct mutex mutex; /* Process one command at time */
refcount_t port_parsed; /* Counter to track parsed port */
- u8 req_port;
- u64 *data; /* pointer to ethtool data */
+};
+
+struct qca8k_pcs {
+ struct phylink_pcs pcs;
+ struct qca8k_priv *priv;
+ int port;
};
struct qca8k_ports_config {
@@ -361,6 +367,7 @@ struct qca8k_ports_config {
bool sgmii_enable_pll;
u8 rgmii_rx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */
u8 rgmii_tx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */
+ struct qca8k_pcs qpcs[QCA8K_NUM_CPU_PORTS];
};
struct qca8k_mdio_cache {
@@ -376,13 +383,10 @@ struct qca8k_mdio_cache {
u16 hi;
};
-struct qca8k_pcs {
- struct phylink_pcs pcs;
- struct qca8k_priv *priv;
- int port;
-};
-
struct qca8k_priv {
+ struct net_device *mgmt_master; /* Track if mdio/mib Ethernet is available */
+ struct qca8k_mgmt_eth_data mgmt_eth_data;
+ struct qca8k_mdio_cache mdio_cache;
u8 switch_id;
u8 switch_revision;
u8 mirror_rx;
@@ -396,15 +400,10 @@ struct qca8k_priv {
struct dsa_switch *ds;
struct mutex reg_mutex;
struct device *dev;
- struct dsa_switch_ops ops;
struct gpio_desc *reset_gpio;
- unsigned int port_mtu[QCA8K_NUM_PORTS];
- struct net_device *mgmt_master; /* Track if mdio/mib Ethernet is available */
- struct qca8k_mgmt_eth_data mgmt_eth_data;
+ struct dsa_switch_ops ops;
struct qca8k_mib_eth_data mib_eth_data;
- struct qca8k_mdio_cache mdio_cache;
- struct qca8k_pcs pcs_port_0;
- struct qca8k_pcs pcs_port_6;
+ unsigned int port_mtu[QCA8K_NUM_PORTS];
};
struct qca8k_mib_desc {
--
2.34.1
next reply other threads:[~2022-02-28 11:04 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-28 11:04 Ansuel Smith [this message]
2022-03-03 1:53 ` [net-next PATCH v2] net: dsa: qca8k: pack driver struct and improve cache use Vladimir Oltean
2022-03-03 2:25 ` Andrew Lunn
2022-03-21 16:07 ` Ansuel Smith
2022-03-21 17:22 ` Vladimir Oltean
2022-03-21 17:26 ` Ansuel Smith
2022-03-21 17:31 ` Ansuel Smith
2022-03-21 18:22 ` Vladimir Oltean
2022-03-21 18:06 ` Ansuel Smith
2022-03-21 18:55 ` Vladimir Oltean
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220228110408.4903-1-ansuelsmth@gmail.com \
--to=ansuelsmth@gmail.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).