From: Veerasenareddy Burru <vburru@marvell.com>
To: <vburru@marvell.com>, <davem@davemloft.net>, <kuba@kernel.org>,
<corbet@lwn.net>, <netdev@vger.kernel.org>,
<linux-doc@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: Abhijit Ayarekar <aayarekar@marvell.com>,
Satananda Burla <sburla@marvell.com>
Subject: [PATCH v2 5/7] octeon_ep: add support for ndo ops
Date: Mon, 28 Feb 2022 21:03:57 -0800 [thread overview]
Message-ID: <20220301050359.19374-6-vburru@marvell.com> (raw)
In-Reply-To: <20220301050359.19374-1-vburru@marvell.com>
Add support for ndo ops to set MAC address, change MTU, get stats.
Add control path support to set MAC address, change MTU, get stats,
set speed, get and set link mode.
Signed-off-by: Veerasenareddy Burru <vburru@marvell.com>
Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com>
Signed-off-by: Satananda Burla <sburla@marvell.com>
---
Changes in v2:
- Address review comments:
- declare variables in reversed Christmas tree, in all functions.
- Replace {0} with {} to zero initialize a structure.
- use success oriented approach when returning on error; Replace
err = foo(..);
if (!err) {
/* Scucess */
....
}
return err;
with
err = foo(..);
if (err)
return err;
/* Success */
....
- fix build errors observed with clang and "make W=1 C=1".
.../marvell/octeon_ep/octep_ctrl_net.c | 63 +++++++++++++++
.../ethernet/marvell/octeon_ep/octep_main.c | 78 +++++++++++++++++++
2 files changed, 141 insertions(+)
diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_ctrl_net.c b/drivers/net/ethernet/marvell/octeon_ep/octep_ctrl_net.c
index c3aca7b2775b..c5df3cf4f8f7 100644
--- a/drivers/net/ethernet/marvell/octeon_ep/octep_ctrl_net.c
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_ctrl_net.c
@@ -87,6 +87,69 @@ int octep_get_mac_addr(struct octep_device *oct, u8 *addr)
return err;
}
+int octep_set_mac_addr(struct octep_device *oct, u8 *addr)
+{
+ struct octep_ctrl_net_h2f_req req = {};
+ struct octep_ctrl_mbox_msg msg = {};
+
+ req.hdr.cmd = OCTEP_CTRL_NET_H2F_CMD_MAC;
+ req.mac.cmd = OCTEP_CTRL_NET_CMD_SET;
+ memcpy(&req.mac.addr, addr, ETH_ALEN);
+
+ msg.hdr.flags = OCTEP_CTRL_MBOX_MSG_HDR_FLAG_REQ;
+ msg.hdr.sizew = OCTEP_CTRL_NET_H2F_MAC_REQ_SZW;
+ msg.msg = &req;
+
+ return octep_ctrl_mbox_send(&oct->ctrl_mbox, &msg);
+}
+
+int octep_set_mtu(struct octep_device *oct, int mtu)
+{
+ struct octep_ctrl_net_h2f_req req = {};
+ struct octep_ctrl_mbox_msg msg = {};
+
+ req.hdr.cmd = OCTEP_CTRL_NET_H2F_CMD_MTU;
+ req.mtu.cmd = OCTEP_CTRL_NET_CMD_SET;
+ req.mtu.val = mtu;
+
+ msg.hdr.flags = OCTEP_CTRL_MBOX_MSG_HDR_FLAG_REQ;
+ msg.hdr.sizew = OCTEP_CTRL_NET_H2F_MTU_REQ_SZW;
+ msg.msg = &req;
+
+ return octep_ctrl_mbox_send(&oct->ctrl_mbox, &msg);
+}
+
+int octep_get_if_stats(struct octep_device *oct)
+{
+ struct octep_iface_rx_stats *iface_rx_stats;
+ struct octep_iface_tx_stats *iface_tx_stats;
+ struct octep_ctrl_net_h2f_req req = {};
+ struct octep_ctrl_mbox_msg msg = {};
+ int err;
+
+ req.hdr.cmd = OCTEP_CTRL_NET_H2F_CMD_GET_IF_STATS;
+ req.mac.cmd = OCTEP_CTRL_NET_CMD_GET;
+ req.get_stats.offset = oct->ctrl_mbox_ifstats_offset;
+
+ msg.hdr.flags = OCTEP_CTRL_MBOX_MSG_HDR_FLAG_REQ;
+ msg.hdr.sizew = OCTEP_CTRL_NET_H2F_GET_STATS_REQ_SZW;
+ msg.msg = &req;
+ err = octep_ctrl_mbox_send(&oct->ctrl_mbox, &msg);
+ if (err)
+ return err;
+
+ iface_rx_stats = (struct octep_iface_rx_stats *)(oct->ctrl_mbox.barmem +
+ oct->ctrl_mbox_ifstats_offset);
+ iface_tx_stats = (struct octep_iface_tx_stats *)(oct->ctrl_mbox.barmem +
+ oct->ctrl_mbox_ifstats_offset +
+ sizeof(struct octep_iface_rx_stats)
+ );
+ memcpy(&oct->iface_rx_stats, iface_rx_stats, sizeof(struct octep_iface_rx_stats));
+ memcpy(&oct->iface_tx_stats, iface_tx_stats, sizeof(struct octep_iface_tx_stats));
+
+ return err;
+}
+
int octep_get_link_info(struct octep_device *oct)
{
struct octep_ctrl_net_h2f_req req = {};
diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_main.c b/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
index f73ee700b200..7f3ec7e002eb 100644
--- a/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
@@ -151,6 +151,43 @@ static netdev_tx_t octep_start_xmit(struct sk_buff *skb,
return NETDEV_TX_OK;
}
+/**
+ * octep_get_stats64() - Get Octeon network device statistics.
+ *
+ * @netdev: kernel network device.
+ * @stats: pointer to stats structure to be filled in.
+ */
+static void octep_get_stats64(struct net_device *netdev,
+ struct rtnl_link_stats64 *stats)
+{
+ u64 tx_packets, tx_bytes, rx_packets, rx_bytes;
+ struct octep_device *oct = netdev_priv(netdev);
+ int q;
+
+ octep_get_if_stats(oct);
+ tx_packets = 0;
+ tx_bytes = 0;
+ rx_packets = 0;
+ rx_bytes = 0;
+ for (q = 0; q < oct->num_oqs; q++) {
+ struct octep_iq *iq = oct->iq[q];
+ struct octep_oq *oq = oct->oq[q];
+
+ tx_packets += iq->stats.instr_completed;
+ tx_bytes += iq->stats.bytes_sent;
+ rx_packets += oq->stats.packets;
+ rx_bytes += oq->stats.bytes;
+ }
+ stats->tx_packets = tx_packets;
+ stats->tx_bytes = tx_bytes;
+ stats->rx_packets = rx_packets;
+ stats->rx_bytes = rx_bytes;
+ stats->multicast = oct->iface_rx_stats.mcast_pkts;
+ stats->rx_errors = oct->iface_rx_stats.err_pkts;
+ stats->collisions = oct->iface_tx_stats.xscol;
+ stats->tx_fifo_errors = oct->iface_tx_stats.undflw;
+}
+
/**
* octep_tx_timeout_task - work queue task to Handle Tx queue timeout.
*
@@ -189,11 +226,52 @@ static void octep_tx_timeout(struct net_device *netdev, unsigned int txqueue)
queue_work(octep_wq, &oct->tx_timeout_task);
}
+static int octep_set_mac(struct net_device *netdev, void *p)
+{
+ struct octep_device *oct = netdev_priv(netdev);
+ struct sockaddr *addr = (struct sockaddr *)p;
+ int err;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ err = octep_set_mac_addr(oct, addr->sa_data);
+ if (err)
+ return err;
+
+ memcpy(oct->mac_addr, addr->sa_data, ETH_ALEN);
+ eth_hw_addr_set(netdev, addr->sa_data);
+
+ return 0;
+}
+
+static int octep_change_mtu(struct net_device *netdev, int new_mtu)
+{
+ struct octep_device *oct = netdev_priv(netdev);
+ struct octep_iface_link_info *link_info;
+ int err = 0;
+
+ link_info = &oct->link_info;
+ if (link_info->mtu == new_mtu)
+ return 0;
+
+ err = octep_set_mtu(oct, new_mtu);
+ if (!err) {
+ oct->link_info.mtu = new_mtu;
+ netdev->mtu = new_mtu;
+ }
+
+ return err;
+}
+
static const struct net_device_ops octep_netdev_ops = {
.ndo_open = octep_open,
.ndo_stop = octep_stop,
.ndo_start_xmit = octep_start_xmit,
+ .ndo_get_stats64 = octep_get_stats64,
.ndo_tx_timeout = octep_tx_timeout,
+ .ndo_set_mac_address = octep_set_mac,
+ .ndo_change_mtu = octep_change_mtu,
};
/**
--
2.17.1
next prev parent reply other threads:[~2022-03-01 5:04 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-01 5:03 [PATCH v2 0/7] Add octeon_ep driver Veerasenareddy Burru
2022-03-01 5:03 ` [PATCH v2 1/7] octeon_ep: Add driver framework and device initialization Veerasenareddy Burru
2022-03-01 15:24 ` kernel test robot
2022-03-01 5:03 ` [PATCH v2 2/7] octeon_ep: add hardware configuration APIs Veerasenareddy Burru
2022-03-01 5:03 ` [PATCH v2 3/7] octeon_ep: Add mailbox for control commands Veerasenareddy Burru
2022-03-01 5:03 ` [PATCH v2 4/7] octeon_ep: add Tx/Rx ring resource setup and cleanup Veerasenareddy Burru
2022-03-01 8:52 ` kernel test robot
2022-03-01 5:03 ` Veerasenareddy Burru [this message]
2022-03-01 5:03 ` [PATCH v2 6/7] octeon_ep: add Tx/Rx processing and interrupt support Veerasenareddy Burru
2022-03-01 10:19 ` kernel test robot
2022-03-01 5:03 ` [PATCH v2 7/7] octeon_ep: add ethtool support for Octeon PCI Endpoint NIC Veerasenareddy Burru
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220301050359.19374-6-vburru@marvell.com \
--to=vburru@marvell.com \
--cc=aayarekar@marvell.com \
--cc=corbet@lwn.net \
--cc=davem@davemloft.net \
--cc=kuba@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=sburla@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).