From: Mattias Forsblad <mattias.forsblad@gmail.com>
To: netdev@vger.kernel.org
Cc: "David S . Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>, Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>,
Vivien Didelot <vivien.didelot@gmail.com>,
Roopa Prabhu <roopa@nvidia.com>,
Nikolay Aleksandrov <razor@blackwall.org>,
Mattias Forsblad <mattias.forsblad+netdev@gmail.com>,
Tobias Waldekranz <tobias@waldekranz.com>
Subject: [PATCH net-next 0/3] bridge: dsa: switchdev: mv88e6xxx: Implement local_receive bridge flag
Date: Tue, 1 Mar 2022 13:31:01 +0100 [thread overview]
Message-ID: <20220301123104.226731-1-mattias.forsblad+netdev@gmail.com> (raw)
Greetings,
This series implements a new bridge flag 'local_receive' and HW
offloading for Marvell mv88e6xxx.
When using a non-VLAN filtering bridge we want to be able to limit
traffic to the CPU port to lessen the CPU load. This is specially
important when we have disabled learning on user ports.
A sample configuration could be something like this:
br0
/ \
swp0 swp1
ip link add dev br0 type bridge stp_state 0 vlan_filtering 0
ip link set swp0 master br0
ip link set swp1 master br0
ip link set swp0 type bridge_slave learning off
ip link set swp1 type bridge_slave learning off
ip link set swp0 up
ip link set swp1 up
ip link set br0 type bridge local_receive 0
ip link set br0 up
The first part of the series implements the flag for the SW bridge
and the second part the DSA infrastructure. The last part implements
offloading of this flag to HW for mv88e6xxx, which uses the
port vlan table to restrict the ingress from user ports
to the CPU port when this flag is cleared.
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Regards,
Mattias Forsblad (3):
net: bridge: Implement bridge flag local_receive
dsa: Handle the local_receive flag in the DSA layer.
mv88e6xxx: Offload the local_receive flag
drivers/net/dsa/mv88e6xxx/chip.c | 45 ++++++++++++++++++++++++++++++--
include/linux/if_bridge.h | 6 +++++
include/net/dsa.h | 6 +++++
include/net/switchdev.h | 2 ++
include/uapi/linux/if_bridge.h | 1 +
include/uapi/linux/if_link.h | 1 +
net/bridge/br.c | 18 +++++++++++++
net/bridge/br_device.c | 1 +
net/bridge/br_input.c | 3 +++
net/bridge/br_ioctl.c | 1 +
net/bridge/br_netlink.c | 14 +++++++++-
net/bridge/br_private.h | 2 ++
net/bridge/br_sysfs_br.c | 23 ++++++++++++++++
net/bridge/br_vlan.c | 8 ++++++
net/dsa/dsa_priv.h | 1 +
net/dsa/slave.c | 16 ++++++++++++
16 files changed, 145 insertions(+), 3 deletions(-)
--
2.25.1
next reply other threads:[~2022-03-01 12:31 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-01 12:31 Mattias Forsblad [this message]
2022-03-01 12:31 ` [PATCH 1/3] net: bridge: Implement bridge flag local_receive Mattias Forsblad
2022-03-01 16:43 ` Ido Schimmel
2022-03-01 22:36 ` Nikolay Aleksandrov
2022-03-02 6:27 ` Mattias Forsblad
2022-03-14 16:29 ` Ido Schimmel
2022-03-14 16:33 ` Ido Schimmel
2022-03-14 16:48 ` Mattias Forsblad
2022-03-02 3:25 ` Roopa Prabhu
2022-03-01 22:43 ` Nikolay Aleksandrov
2022-03-02 6:33 ` Mattias Forsblad
2022-03-02 6:38 ` Mattias Forsblad
2022-03-01 12:31 ` [PATCH 2/3] dsa: Handle the local_receive flag in the DSA layer Mattias Forsblad
2022-03-01 12:31 ` [PATCH 3/3] mv88e6xxx: Offload the local_receive flag Mattias Forsblad
2022-03-02 12:19 ` kernel test robot
2022-03-02 13:30 ` kernel test robot
2022-03-01 17:14 ` [PATCH net-next 0/3] bridge: dsa: switchdev: mv88e6xxx: Implement local_receive bridge flag Florian Fainelli
2022-03-01 21:04 ` Tobias Waldekranz
2022-03-17 14:05 ` Vladimir Oltean
2022-03-18 7:58 ` Tobias Waldekranz
2022-03-18 11:11 ` Vladimir Oltean
2022-03-18 12:09 ` Tobias Waldekranz
2022-03-18 12:44 ` Vladimir Oltean
2022-03-18 16:03 ` Tobias Waldekranz
2022-03-18 16:26 ` Vladimir Oltean
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220301123104.226731-1-mattias.forsblad+netdev@gmail.com \
--to=mattias.forsblad@gmail.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=kuba@kernel.org \
--cc=mattias.forsblad+netdev@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=razor@blackwall.org \
--cc=roopa@nvidia.com \
--cc=tobias@waldekranz.com \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).