[net-next 15/15] net/mlx5e: Remove overzealous validations in netlink EEPROM query

[Saeed Mahameed <saeed@kernel.org>]

From: Gal Pressman <gal@nvidia.com>

Unlike the legacy EEPROM callbacks, when using the netlink EEPROM query
(get_module_eeprom_by_page) the driver should not try to validate the
query parameters, but just perform the read requested by the userspace.

Recent discussion in the mailing list:
https://lore.kernel.org/netdev/20220120093051.70845141@kicinski-fedora-PC1C0HJN.hsd1.ca.comcast.net/

Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
 .../net/ethernet/mellanox/mlx5/core/port.c    | 23 -------------------
 1 file changed, 23 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/port.c b/drivers/net/ethernet/mellanox/mlx5/core/port.c
index 493cacb4610b..e1bd54574ea5 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/port.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/port.c
@@ -451,35 +451,12 @@ int mlx5_query_module_eeprom_by_page(struct mlx5_core_dev *dev,
 				     struct mlx5_module_eeprom_query_params *params,
 				     u8 *data)
 {
-	u8 module_id;
 	int err;
 
 	err = mlx5_query_module_num(dev, &params->module_number);
 	if (err)
 		return err;
 
-	err = mlx5_query_module_id(dev, params->module_number, &module_id);
-	if (err)
-		return err;
-
-	switch (module_id) {
-	case MLX5_MODULE_ID_SFP:
-		if (params->page > 0)
-			return -EINVAL;
-		break;
-	case MLX5_MODULE_ID_QSFP:
-	case MLX5_MODULE_ID_QSFP28:
-	case MLX5_MODULE_ID_QSFP_PLUS:
-		if (params->page > 3)
-			return -EINVAL;
-		break;
-	case MLX5_MODULE_ID_DSFP:
-		break;
-	default:
-		mlx5_core_err(dev, "Module ID not recognized: 0x%x\n", module_id);
-		return -EINVAL;
-	}
-
 	if (params->i2c_address != MLX5_I2C_ADDR_HIGH &&
 	    params->i2c_address != MLX5_I2C_ADDR_LOW) {
 		mlx5_core_err(dev, "I2C address not recognized: 0x%x\n", params->i2c_address);
-- 
2.35.1