netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Masami Hiramatsu <mhiramat@kernel.org>
To: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>, Alexei Starovoitov <ast@kernel.org>,
	Daniel Borkmann <daniel@iogearbox.net>,
	Andrii Nakryiko <andrii@kernel.org>,
	Networking <netdev@vger.kernel.org>, bpf <bpf@vger.kernel.org>,
	lkml <linux-kernel@vger.kernel.org>,
	Martin KaFai Lau <kafai@fb.com>, Song Liu <songliubraving@fb.com>,
	Yonghong Song <yhs@fb.com>,
	John Fastabend <john.fastabend@gmail.com>,
	KP Singh <kpsingh@chromium.org>,
	Steven Rostedt <rostedt@goodmis.org>,
	"Naveen N . Rao" <naveen.n.rao@linux.ibm.com>,
	Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>,
	"David S . Miller" <davem@davemloft.net>
Subject: Re: [PATCH v10 12/12] fprobe: Add a selftest for fprobe
Date: Sat, 12 Mar 2022 10:57:05 +0900	[thread overview]
Message-ID: <20220312105705.f1d2c30c4e2023f5e7a7842c@kernel.org> (raw)
In-Reply-To: <CAEf4BzZXS5eg-409S5XGB-gC8CkC9YAYk7EsugKgOpCr+zAsUg@mail.gmail.com>

On Fri, 11 Mar 2022 10:35:30 -0800
Andrii Nakryiko <andrii.nakryiko@gmail.com> wrote:

> On Thu, Mar 10, 2022 at 7:11 AM Masami Hiramatsu <mhiramat@kernel.org> wrote:
> >
> > On Wed, 9 Mar 2022 16:40:00 -0800
> > Andrii Nakryiko <andrii.nakryiko@gmail.com> wrote:
> >
> > > On Wed, Mar 9, 2022 at 4:17 PM Masami Hiramatsu <mhiramat@kernel.org> wrote:
> > > >
> > > > Hi,
> > > >
> > > > On Tue,  8 Mar 2022 20:10:48 +0900
> > > > Masami Hiramatsu <mhiramat@kernel.org> wrote:
> > > >
> > > > > Add a KUnit based selftest for fprobe interface.
> > > > >
> > > > > Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
> > > > > ---
> > > > >  Changes in v9:
> > > > >   - Rename fprobe_target* to fprobe_selftest_target*.
> > > > >   - Find the correct expected ip by ftrace_location_range().
> > > > >   - Since the ftrace_location_range() is not exposed to module, make
> > > > >     this test only for embedded.
> > > > >   - Add entry only test.
> > > > >   - Reset the fprobe structure before reuse it.
> > > > > ---
> > > > >  lib/Kconfig.debug |   12 ++++
> > > > >  lib/Makefile      |    2 +
> > > > >  lib/test_fprobe.c |  174 +++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > > >  3 files changed, 188 insertions(+)
> > > > >  create mode 100644 lib/test_fprobe.c
> > > > >
> > > > > diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
> > > > > index 14b89aa37c5c..ffc469a12afc 100644
> > > > > --- a/lib/Kconfig.debug
> > > > > +++ b/lib/Kconfig.debug
> > > > > @@ -2100,6 +2100,18 @@ config KPROBES_SANITY_TEST
> > > > >
> > > > >         Say N if you are unsure.
> > > > >
> > > > > +config FPROBE_SANITY_TEST
> > > > > +     bool "Self test for fprobe"
> > > > > +     depends on DEBUG_KERNEL
> > > > > +     depends on FPROBE
> > > > > +     depends on KUNIT
> > > >
> > > > Hmm, this caused a build error with allmodconfig because KUNIT=m but FPROBE_SANITY_TEST=y.
> > > > Let me fix this issue.
> > >
> > > Please base on top of bpf-next and add [PATCH v11 bpf-next] to subject.
> >
> > OK, let me rebase on it.
> > There are master and for-next branch, which one is better to use?
> >
> 
> Sorry, missed your reply earlier. Always rebase against master.
> 
> You forgot to add "bpf-next" into [PATCH] prefix, so I had to manually
> mark it in patchworks as delegated to bpf queue (this is necessary for
> our CI to properly pick it up). For future submissions to bpf-next,
> please don't forget to add "bpf-next" marker.
> 

Oops, sorry, I forgot that. Should I resend with that tag?

Thank you,


> > Thank you,
> >
> > >
> > > >
> > > > Thank you,
> > > >
> > > > > +     help
> > > > > +       This option will enable testing the fprobe when the system boot.
> > > > > +       A series of tests are made to verify that the fprobe is functioning
> > > > > +       properly.
> > > > > +
> > > > > +       Say N if you are unsure.
> > > > > +
> > > > >  config BACKTRACE_SELF_TEST
> > > > >       tristate "Self test for the backtrace code"
> > > > >       depends on DEBUG_KERNEL
> > > > > diff --git a/lib/Makefile b/lib/Makefile
> > > > > index 300f569c626b..154008764b16 100644
> > > > > --- a/lib/Makefile
> > > > > +++ b/lib/Makefile
> > > > > @@ -103,6 +103,8 @@ obj-$(CONFIG_TEST_HMM) += test_hmm.o
> > > > >  obj-$(CONFIG_TEST_FREE_PAGES) += test_free_pages.o
> > > > >  obj-$(CONFIG_KPROBES_SANITY_TEST) += test_kprobes.o
> > > > >  obj-$(CONFIG_TEST_REF_TRACKER) += test_ref_tracker.o
> > > > > +CFLAGS_test_fprobe.o += $(CC_FLAGS_FTRACE)
> > > > > +obj-$(CONFIG_FPROBE_SANITY_TEST) += test_fprobe.o
> > > > >  #
> > > > >  # CFLAGS for compiling floating point code inside the kernel. x86/Makefile turns
> > > > >  # off the generation of FPU/SSE* instructions for kernel proper but FPU_FLAGS
> > > > > diff --git a/lib/test_fprobe.c b/lib/test_fprobe.c
> > > > > new file mode 100644
> > > > > index 000000000000..ed70637a2ffa
> > > > > --- /dev/null
> > > > > +++ b/lib/test_fprobe.c
> > > > > @@ -0,0 +1,174 @@
> > > > > +// SPDX-License-Identifier: GPL-2.0-or-later
> > > > > +/*
> > > > > + * test_fprobe.c - simple sanity test for fprobe
> > > > > + */
> > > > > +
> > > > > +#include <linux/kernel.h>
> > > > > +#include <linux/fprobe.h>
> > > > > +#include <linux/random.h>
> > > > > +#include <kunit/test.h>
> > > > > +
> > > > > +#define div_factor 3
> > > > > +
> > > > > +static struct kunit *current_test;
> > > > > +
> > > > > +static u32 rand1, entry_val, exit_val;
> > > > > +
> > > > > +/* Use indirect calls to avoid inlining the target functions */
> > > > > +static u32 (*target)(u32 value);
> > > > > +static u32 (*target2)(u32 value);
> > > > > +static unsigned long target_ip;
> > > > > +static unsigned long target2_ip;
> > > > > +
> > > > > +static noinline u32 fprobe_selftest_target(u32 value)
> > > > > +{
> > > > > +     return (value / div_factor);
> > > > > +}
> > > > > +
> > > > > +static noinline u32 fprobe_selftest_target2(u32 value)
> > > > > +{
> > > > > +     return (value / div_factor) + 1;
> > > > > +}
> > > > > +
> > > > > +static notrace void fp_entry_handler(struct fprobe *fp, unsigned long ip, struct pt_regs *regs)
> > > > > +{
> > > > > +     KUNIT_EXPECT_FALSE(current_test, preemptible());
> > > > > +     /* This can be called on the fprobe_selftest_target and the fprobe_selftest_target2 */
> > > > > +     if (ip != target_ip)
> > > > > +             KUNIT_EXPECT_EQ(current_test, ip, target2_ip);
> > > > > +     entry_val = (rand1 / div_factor);
> > > > > +}
> > > > > +
> > > > > +static notrace void fp_exit_handler(struct fprobe *fp, unsigned long ip, struct pt_regs *regs)
> > > > > +{
> > > > > +     unsigned long ret = regs_return_value(regs);
> > > > > +
> > > > > +     KUNIT_EXPECT_FALSE(current_test, preemptible());
> > > > > +     if (ip != target_ip) {
> > > > > +             KUNIT_EXPECT_EQ(current_test, ip, target2_ip);
> > > > > +             KUNIT_EXPECT_EQ(current_test, ret, (rand1 / div_factor) + 1);
> > > > > +     } else
> > > > > +             KUNIT_EXPECT_EQ(current_test, ret, (rand1 / div_factor));
> > > > > +     KUNIT_EXPECT_EQ(current_test, entry_val, (rand1 / div_factor));
> > > > > +     exit_val = entry_val + div_factor;
> > > > > +}
> > > > > +
> > > > > +/* Test entry only (no rethook) */
> > > > > +static void test_fprobe_entry(struct kunit *test)
> > > > > +{
> > > > > +     struct fprobe fp_entry = {
> > > > > +             .entry_handler = fp_entry_handler,
> > > > > +     };
> > > > > +
> > > > > +     current_test = test;
> > > > > +
> > > > > +     /* Before register, unregister should be failed. */
> > > > > +     KUNIT_EXPECT_NE(test, 0, unregister_fprobe(&fp_entry));
> > > > > +     KUNIT_EXPECT_EQ(test, 0, register_fprobe(&fp_entry, "fprobe_selftest_target*", NULL));
> > > > > +
> > > > > +     entry_val = 0;
> > > > > +     exit_val = 0;
> > > > > +     target(rand1);
> > > > > +     KUNIT_EXPECT_NE(test, 0, entry_val);
> > > > > +     KUNIT_EXPECT_EQ(test, 0, exit_val);
> > > > > +
> > > > > +     entry_val = 0;
> > > > > +     exit_val = 0;
> > > > > +     target2(rand1);
> > > > > +     KUNIT_EXPECT_NE(test, 0, entry_val);
> > > > > +     KUNIT_EXPECT_EQ(test, 0, exit_val);
> > > > > +
> > > > > +     KUNIT_EXPECT_EQ(test, 0, unregister_fprobe(&fp_entry));
> > > > > +}
> > > > > +
> > > > > +static void test_fprobe(struct kunit *test)
> > > > > +{
> > > > > +     struct fprobe fp = {
> > > > > +             .entry_handler = fp_entry_handler,
> > > > > +             .exit_handler = fp_exit_handler,
> > > > > +     };
> > > > > +
> > > > > +     current_test = test;
> > > > > +     KUNIT_EXPECT_EQ(test, 0, register_fprobe(&fp, "fprobe_selftest_target*", NULL));
> > > > > +
> > > > > +     entry_val = 0;
> > > > > +     exit_val = 0;
> > > > > +     target(rand1);
> > > > > +     KUNIT_EXPECT_NE(test, 0, entry_val);
> > > > > +     KUNIT_EXPECT_EQ(test, entry_val + div_factor, exit_val);
> > > > > +
> > > > > +     entry_val = 0;
> > > > > +     exit_val = 0;
> > > > > +     target2(rand1);
> > > > > +     KUNIT_EXPECT_NE(test, 0, entry_val);
> > > > > +     KUNIT_EXPECT_EQ(test, entry_val + div_factor, exit_val);
> > > > > +
> > > > > +     KUNIT_EXPECT_EQ(test, 0, unregister_fprobe(&fp));
> > > > > +}
> > > > > +
> > > > > +static void test_fprobe_syms(struct kunit *test)
> > > > > +{
> > > > > +     static const char *syms[] = {"fprobe_selftest_target", "fprobe_selftest_target2"};
> > > > > +     struct fprobe fp = {
> > > > > +             .entry_handler = fp_entry_handler,
> > > > > +             .exit_handler = fp_exit_handler,
> > > > > +     };
> > > > > +
> > > > > +     current_test = test;
> > > > > +     KUNIT_EXPECT_EQ(test, 0, register_fprobe_syms(&fp, syms, 2));
> > > > > +
> > > > > +     entry_val = 0;
> > > > > +     exit_val = 0;
> > > > > +     target(rand1);
> > > > > +     KUNIT_EXPECT_NE(test, 0, entry_val);
> > > > > +     KUNIT_EXPECT_EQ(test, entry_val + div_factor, exit_val);
> > > > > +
> > > > > +     entry_val = 0;
> > > > > +     exit_val = 0;
> > > > > +     target2(rand1);
> > > > > +     KUNIT_EXPECT_NE(test, 0, entry_val);
> > > > > +     KUNIT_EXPECT_EQ(test, entry_val + div_factor, exit_val);
> > > > > +
> > > > > +     KUNIT_EXPECT_EQ(test, 0, unregister_fprobe(&fp));
> > > > > +}
> > > > > +
> > > > > +static unsigned long get_ftrace_location(void *func)
> > > > > +{
> > > > > +     unsigned long size, addr = (unsigned long)func;
> > > > > +
> > > > > +     if (!kallsyms_lookup_size_offset(addr, &size, NULL) || !size)
> > > > > +             return 0;
> > > > > +
> > > > > +     return ftrace_location_range(addr, addr + size - 1);
> > > > > +}
> > > > > +
> > > > > +static int fprobe_test_init(struct kunit *test)
> > > > > +{
> > > > > +     do {
> > > > > +             rand1 = prandom_u32();
> > > > > +     } while (rand1 <= div_factor);
> > > > > +
> > > > > +     target = fprobe_selftest_target;
> > > > > +     target2 = fprobe_selftest_target2;
> > > > > +     target_ip = get_ftrace_location(target);
> > > > > +     target2_ip = get_ftrace_location(target2);
> > > > > +
> > > > > +     return 0;
> > > > > +}
> > > > > +
> > > > > +static struct kunit_case fprobe_testcases[] = {
> > > > > +     KUNIT_CASE(test_fprobe_entry),
> > > > > +     KUNIT_CASE(test_fprobe),
> > > > > +     KUNIT_CASE(test_fprobe_syms),
> > > > > +     {}
> > > > > +};
> > > > > +
> > > > > +static struct kunit_suite fprobe_test_suite = {
> > > > > +     .name = "fprobe_test",
> > > > > +     .init = fprobe_test_init,
> > > > > +     .test_cases = fprobe_testcases,
> > > > > +};
> > > > > +
> > > > > +kunit_test_suites(&fprobe_test_suite);
> > > > > +
> > > > > +MODULE_LICENSE("GPL");
> > > > >
> > > >
> > > >
> > > > --
> > > > Masami Hiramatsu <mhiramat@kernel.org>
> >
> >
> > --
> > Masami Hiramatsu <mhiramat@kernel.org>


-- 
Masami Hiramatsu <mhiramat@kernel.org>

      reply	other threads:[~2022-03-12  1:57 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-08 11:08 [PATCH v10 00/12] fprobe: Introduce fprobe function entry/exit probe Masami Hiramatsu
2022-03-08 11:08 ` [PATCH v10 01/12] ftrace: Add ftrace_set_filter_ips function Masami Hiramatsu
2022-03-08 11:08 ` [PATCH v10 02/12] fprobe: Add ftrace based probe APIs Masami Hiramatsu
2022-03-08 11:09 ` [PATCH v10 03/12] rethook: Add a generic return hook Masami Hiramatsu
2022-03-11  3:52   ` Hou Tao
2022-03-08 11:09 ` [PATCH v10 04/12] rethook: x86: Add rethook x86 implementation Masami Hiramatsu
2022-03-08 11:09 ` [PATCH v10 05/12] arm64: rethook: Add arm64 rethook implementation Masami Hiramatsu
2022-03-08 11:09 ` [PATCH v10 06/12] powerpc: Add rethook support Masami Hiramatsu
2022-03-08 11:09 ` [PATCH v10 07/12] ARM: rethook: Add rethook arm implementation Masami Hiramatsu
2022-03-08 11:10 ` [PATCH v10 08/12] fprobe: Add exit_handler support Masami Hiramatsu
2022-03-08 11:10 ` [PATCH v10 09/12] fprobe: Add sample program for fprobe Masami Hiramatsu
2022-03-08 11:10 ` [PATCH v10 10/12] fprobe: Introduce FPROBE_FL_KPROBE_SHARED flag " Masami Hiramatsu
2022-03-08 11:10 ` [PATCH v10 11/12] docs: fprobe: Add fprobe description to ftrace-use.rst Masami Hiramatsu
2022-03-08 11:10 ` [PATCH v10 12/12] fprobe: Add a selftest for fprobe Masami Hiramatsu
2022-03-10  0:17   ` Masami Hiramatsu
2022-03-10  0:40     ` Andrii Nakryiko
2022-03-10 15:11       ` Masami Hiramatsu
2022-03-11 18:35         ` Andrii Nakryiko
2022-03-12  1:57           ` Masami Hiramatsu [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220312105705.f1d2c30c4e2023f5e7a7842c@kernel.org \
    --to=mhiramat@kernel.org \
    --cc=andrii.nakryiko@gmail.com \
    --cc=andrii@kernel.org \
    --cc=anil.s.keshavamurthy@intel.com \
    --cc=ast@kernel.org \
    --cc=bpf@vger.kernel.org \
    --cc=daniel@iogearbox.net \
    --cc=davem@davemloft.net \
    --cc=john.fastabend@gmail.com \
    --cc=jolsa@redhat.com \
    --cc=kafai@fb.com \
    --cc=kpsingh@chromium.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=naveen.n.rao@linux.ibm.com \
    --cc=netdev@vger.kernel.org \
    --cc=rostedt@goodmis.org \
    --cc=songliubraving@fb.com \
    --cc=yhs@fb.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).