[PATCH AUTOSEL 5.15 02/98] ath5k: fix OOB in ath5k_eeprom_read_pcal_info_5111

[PATCH AUTOSEL 5.15 02/98] ath5k: fix OOB in ath5k_eeprom_read_pcal_info_5111

[Sasha Levin]

From: Zekun Shen <bruceshenzk@gmail.com>

[ Upstream commit 564d4eceb97eaf381dd6ef6470b06377bb50c95a ]

The bug was found during fuzzing. Stacktrace locates it in
ath5k_eeprom_convert_pcal_info_5111.
When none of the curve is selected in the loop, idx can go
up to AR5K_EEPROM_N_PD_CURVES. The line makes pd out of bound.
pd = &chinfo[pier].pd_curves[idx];

There are many OOB writes using pd later in the code. So I
added a sanity check for idx. Checks for other loops involving
AR5K_EEPROM_N_PD_CURVES are not needed as the loop index is not
used outside the loops.

The patch is NOT tested with real device.

The following is the fuzzing report

BUG: KASAN: slab-out-of-bounds in ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k]
Write of size 1 at addr ffff8880174a4d60 by task modprobe/214

CPU: 0 PID: 214 Comm: modprobe Not tainted 5.6.0 #1
Call Trace:
 dump_stack+0x76/0xa0
 print_address_description.constprop.0+0x16/0x200
 ? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k]
 ? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k]
 __kasan_report.cold+0x37/0x7c
 ? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k]
 kasan_report+0xe/0x20
 ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k]
 ? apic_timer_interrupt+0xa/0x20
 ? ath5k_eeprom_init_11a_pcal_freq+0xbc0/0xbc0 [ath5k]
 ? ath5k_pci_eeprom_read+0x228/0x3c0 [ath5k]
 ath5k_eeprom_init+0x2513/0x6290 [ath5k]
 ? ath5k_eeprom_init_11a_pcal_freq+0xbc0/0xbc0 [ath5k]
 ? usleep_range+0xb8/0x100
 ? apic_timer_interrupt+0xa/0x20
 ? ath5k_eeprom_read_pcal_info_2413+0x2f20/0x2f20 [ath5k]
 ath5k_hw_init+0xb60/0x1970 [ath5k]
 ath5k_init_ah+0x6fe/0x2530 [ath5k]
 ? kasprintf+0xa6/0xe0
 ? ath5k_stop+0x140/0x140 [ath5k]
 ? _dev_notice+0xf6/0xf6
 ? apic_timer_interrupt+0xa/0x20
 ath5k_pci_probe.cold+0x29a/0x3d6 [ath5k]
 ? ath5k_pci_eeprom_read+0x3c0/0x3c0 [ath5k]
 ? mutex_lock+0x89/0xd0
 ? ath5k_pci_eeprom_read+0x3c0/0x3c0 [ath5k]
 local_pci_probe+0xd3/0x160
 pci_device_probe+0x23f/0x3e0
 ? pci_device_remove+0x280/0x280
 ? pci_device_remove+0x280/0x280
 really_probe+0x209/0x5d0

Reported-by: Brendan Dolan-Gavitt <brendandg@nyu.edu>
Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/YckvDdj3mtCkDRIt@a-10-27-26-18.dynapool.vpn.nyu.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath5k/eeprom.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index 1fbc2c19848f..d444b3d70ba2 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -746,6 +746,9 @@ ath5k_eeprom_convert_pcal_info_5111(struct ath5k_hw *ah, int mode,
 			}
 		}
 
+		if (idx == AR5K_EEPROM_N_PD_CURVES)
+			goto err_out;
+
 		ee->ee_pd_gains[mode] = 1;
 
 		pd = &chinfo[pier].pd_curves[idx];
-- 
2.34.1

[PATCH AUTOSEL 5.15 10/98] ptp: replace snprintf with sysfs_emit

[Sasha Levin]

From: Yang Guang <yang.guang5@zte.com.cn>

[ Upstream commit e2cf07654efb0fd7bbcb475c6f74be7b5755a8fd ]

coccinelle report:
./drivers/ptp/ptp_sysfs.c:17:8-16:
WARNING: use scnprintf or sprintf
./drivers/ptp/ptp_sysfs.c:390:8-16:
WARNING: use scnprintf or sprintf

Use sysfs_emit instead of scnprintf or sprintf makes more sense.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: David Yang <davidcomponentone@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ptp/ptp_sysfs.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/ptp/ptp_sysfs.c b/drivers/ptp/ptp_sysfs.c
index 41b92dc2f011..9233bfedeb17 100644
--- a/drivers/ptp/ptp_sysfs.c
+++ b/drivers/ptp/ptp_sysfs.c
@@ -14,7 +14,7 @@ static ssize_t clock_name_show(struct device *dev,
 			       struct device_attribute *attr, char *page)
 {
 	struct ptp_clock *ptp = dev_get_drvdata(dev);
-	return snprintf(page, PAGE_SIZE-1, "%s\n", ptp->info->name);
+	return sysfs_emit(page, "%s\n", ptp->info->name);
 }
 static DEVICE_ATTR_RO(clock_name);
 
@@ -387,7 +387,7 @@ static ssize_t ptp_pin_show(struct device *dev, struct device_attribute *attr,
 
 	mutex_unlock(&ptp->pincfg_mux);
 
-	return snprintf(page, PAGE_SIZE, "%u %u\n", func, chan);
+	return sysfs_emit(page, "%u %u\n", func, chan);
 }
 
 static ssize_t ptp_pin_store(struct device *dev, struct device_attribute *attr,
-- 
2.34.1

[PATCH AUTOSEL 5.15 13/98] ath11k: fix kernel panic during unload/load ath11k modules

[Sasha Levin]

From: Venkateswara Naralasetty <quic_vnaralas@quicinc.com>

[ Upstream commit 22b59cb965f79ee1accf83172441c9ca0ecb632a ]

Call netif_napi_del() from ath11k_ahb_free_ext_irq() to fix
the following kernel panic when unload/load ath11k modules
for few iterations.

[  971.201365] Unable to handle kernel paging request at virtual address 6d97a208
[  971.204227] pgd = 594c2919
[  971.211478] [6d97a208] *pgd=00000000
[  971.214120] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[  971.412024] CPU: 2 PID: 4435 Comm: insmod Not tainted 5.4.89 #0
[  971.434256] Hardware name: Generic DT based system
[  971.440165] PC is at napi_by_id+0x10/0x40
[  971.445019] LR is at netif_napi_add+0x160/0x1dc

[  971.743127] (napi_by_id) from [<807d89a0>] (netif_napi_add+0x160/0x1dc)
[  971.751295] (netif_napi_add) from [<7f1209ac>] (ath11k_ahb_config_irq+0xf8/0x414 [ath11k_ahb])
[  971.759164] (ath11k_ahb_config_irq [ath11k_ahb]) from [<7f12135c>] (ath11k_ahb_probe+0x40c/0x51c [ath11k_ahb])
[  971.768567] (ath11k_ahb_probe [ath11k_ahb]) from [<80666864>] (platform_drv_probe+0x48/0x94)
[  971.779670] (platform_drv_probe) from [<80664718>] (really_probe+0x1c8/0x450)
[  971.789389] (really_probe) from [<80664cc4>] (driver_probe_device+0x15c/0x1b8)
[  971.797547] (driver_probe_device) from [<80664f60>] (device_driver_attach+0x44/0x60)
[  971.805795] (device_driver_attach) from [<806650a0>] (__driver_attach+0x124/0x140)
[  971.814822] (__driver_attach) from [<80662adc>] (bus_for_each_dev+0x58/0xa4)
[  971.823328] (bus_for_each_dev) from [<80663a2c>] (bus_add_driver+0xf0/0x1e8)
[  971.831662] (bus_add_driver) from [<806658a4>] (driver_register+0xa8/0xf0)
[  971.839822] (driver_register) from [<8030269c>] (do_one_initcall+0x78/0x1ac)
[  971.847638] (do_one_initcall) from [<80392524>] (do_init_module+0x54/0x200)
[  971.855968] (do_init_module) from [<803945b0>] (load_module+0x1e30/0x1ffc)
[  971.864126] (load_module) from [<803948b0>] (sys_init_module+0x134/0x17c)
[  971.871852] (sys_init_module) from [<80301000>] (ret_fast_syscall+0x0/0x50)

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.6.0.1-00760-QCAHKSWPL_SILICONZ-1

Signed-off-by: Venkateswara Naralasetty <quic_vnaralas@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1642583973-21599-1-git-send-email-quic_vnaralas@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath11k/ahb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/ath/ath11k/ahb.c b/drivers/net/wireless/ath/ath11k/ahb.c
index 3fb0aa000825..24bd0520926b 100644
--- a/drivers/net/wireless/ath/ath11k/ahb.c
+++ b/drivers/net/wireless/ath/ath11k/ahb.c
@@ -391,6 +391,8 @@ static void ath11k_ahb_free_ext_irq(struct ath11k_base *ab)
 
 		for (j = 0; j < irq_grp->num_irq; j++)
 			free_irq(ab->irq_num[irq_grp->irqs[j]], irq_grp);
+
+		netif_napi_del(&irq_grp->napi);
 	}
 }
 
-- 
2.34.1

[PATCH AUTOSEL 5.15 14/98] ath11k: pci: fix crash on suspend if board file is not found

[Sasha Levin]

From: Kalle Valo <quic_kvalo@quicinc.com>

[ Upstream commit b4f4c56459a5c744f7f066b9fc2b54ea995030c5 ]

Mario reported that the kernel was crashing on suspend if ath11k was not able
to find a board file:

[  473.693286] PM: Suspending system (s2idle)
[  473.693291] printk: Suspending console(s) (use no_console_suspend to debug)
[  474.407787] BUG: unable to handle page fault for address: 0000000000002070
[  474.407791] #PF: supervisor read access in kernel mode
[  474.407794] #PF: error_code(0x0000) - not-present page
[  474.407798] PGD 0 P4D 0
[  474.407801] Oops: 0000 [#1] PREEMPT SMP NOPTI
[  474.407805] CPU: 2 PID: 2350 Comm: kworker/u32:14 Tainted: G        W         5.16.0 #248
[...]
[  474.407868] Call Trace:
[  474.407870]  <TASK>
[  474.407874]  ? _raw_spin_lock_irqsave+0x2a/0x60
[  474.407882]  ? lock_timer_base+0x72/0xa0
[  474.407889]  ? _raw_spin_unlock_irqrestore+0x29/0x3d
[  474.407892]  ? try_to_del_timer_sync+0x54/0x80
[  474.407896]  ath11k_dp_rx_pktlog_stop+0x49/0xc0 [ath11k]
[  474.407912]  ath11k_core_suspend+0x34/0x130 [ath11k]
[  474.407923]  ath11k_pci_pm_suspend+0x1b/0x50 [ath11k_pci]
[  474.407928]  pci_pm_suspend+0x7e/0x170
[  474.407935]  ? pci_pm_freeze+0xc0/0xc0
[  474.407939]  dpm_run_callback+0x4e/0x150
[  474.407947]  __device_suspend+0x148/0x4c0
[  474.407951]  async_suspend+0x20/0x90
dmesg-efi-164255130401001:
Oops#1 Part1
[  474.407955]  async_run_entry_fn+0x33/0x120
[  474.407959]  process_one_work+0x220/0x3f0
[  474.407966]  worker_thread+0x4a/0x3d0
[  474.407971]  kthread+0x17a/0x1a0
[  474.407975]  ? process_one_work+0x3f0/0x3f0
[  474.407979]  ? set_kthread_struct+0x40/0x40
[  474.407983]  ret_from_fork+0x22/0x30
[  474.407991]  </TASK>

The issue here is that board file loading happens after ath11k_pci_probe()
succesfully returns (ath11k initialisation happends asynchronously) and the
suspend handler is still enabled, of course failing as ath11k is not properly
initialised. Fix this by checking ATH11K_FLAG_QMI_FAIL during both suspend and
resume.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2

Reported-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215504
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220127090117.2024-1-kvalo@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath11k/pci.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/net/wireless/ath/ath11k/pci.c b/drivers/net/wireless/ath/ath11k/pci.c
index 54ce08f1c6e0..353a2d669fcd 100644
--- a/drivers/net/wireless/ath/ath11k/pci.c
+++ b/drivers/net/wireless/ath/ath11k/pci.c
@@ -1382,6 +1382,11 @@ static __maybe_unused int ath11k_pci_pm_suspend(struct device *dev)
 	struct ath11k_base *ab = dev_get_drvdata(dev);
 	int ret;
 
+	if (test_bit(ATH11K_FLAG_QMI_FAIL, &ab->dev_flags)) {
+		ath11k_dbg(ab, ATH11K_DBG_BOOT, "boot skipping pci suspend as qmi is not initialised\n");
+		return 0;
+	}
+
 	ret = ath11k_core_suspend(ab);
 	if (ret)
 		ath11k_warn(ab, "failed to suspend core: %d\n", ret);
@@ -1394,6 +1399,11 @@ static __maybe_unused int ath11k_pci_pm_resume(struct device *dev)
 	struct ath11k_base *ab = dev_get_drvdata(dev);
 	int ret;
 
+	if (test_bit(ATH11K_FLAG_QMI_FAIL, &ab->dev_flags)) {
+		ath11k_dbg(ab, ATH11K_DBG_BOOT, "boot skipping pci resume as qmi is not initialised\n");
+		return 0;
+	}
+
 	ret = ath11k_core_resume(ab);
 	if (ret)
 		ath11k_warn(ab, "failed to resume core: %d\n", ret);
-- 
2.34.1

[PATCH AUTOSEL 5.15 15/98] ath11k: mhi: use mhi_sync_power_up()

[Sasha Levin]

From: Kalle Valo <quic_kvalo@quicinc.com>

[ Upstream commit 3df6d74aedfdca919cca475d15dfdbc8b05c9e5d ]

If amss.bin was missing ath11k would crash during 'rmmod ath11k_pci'. The
reason for that was that we were using mhi_async_power_up() which does not
check any errors. But mhi_sync_power_up() on the other hand does check for
errors so let's use that to fix the crash.

I was not able to find a reason why an async version was used.
ath11k_mhi_start() (which enables state ATH11K_MHI_POWER_ON) is called from
ath11k_hif_power_up(), which can sleep. So sync version should be safe to use
here.

[  145.569731] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN PTI
[  145.569789] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[  145.569843] CPU: 2 PID: 1628 Comm: rmmod Kdump: loaded Tainted: G        W         5.16.0-wt-ath+ #567
[  145.569898] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021
[  145.569956] RIP: 0010:ath11k_hal_srng_access_begin+0xb5/0x2b0 [ath11k]
[  145.570028] Code: df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 ec 01 00 00 48 8b ab a8 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 ea 48 c1 ea 03 <0f> b6 14 02 48 89 e8 83 e0 07 83 c0 03 45 85 ed 75 48 38 d0 7c 08
[  145.570089] RSP: 0018:ffffc900025d7ac0 EFLAGS: 00010246
[  145.570144] RAX: dffffc0000000000 RBX: ffff88814fca2dd8 RCX: 1ffffffff50cb455
[  145.570196] RDX: 0000000000000000 RSI: ffff88814fca2dd8 RDI: ffff88814fca2e80
[  145.570252] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffffa8659497
[  145.570329] R10: fffffbfff50cb292 R11: 0000000000000001 R12: ffff88814fca0000
[  145.570410] R13: 0000000000000000 R14: ffff88814fca2798 R15: ffff88814fca2dd8
[  145.570465] FS:  00007fa399988540(0000) GS:ffff888233e00000(0000) knlGS:0000000000000000
[  145.570519] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  145.570571] CR2: 00007fa399b51421 CR3: 0000000137898002 CR4: 00000000003706e0
[  145.570623] Call Trace:
[  145.570675]  <TASK>
[  145.570727]  ? ath11k_ce_tx_process_cb+0x34b/0x860 [ath11k]
[  145.570797]  ath11k_ce_tx_process_cb+0x356/0x860 [ath11k]
[  145.570864]  ? tasklet_init+0x150/0x150
[  145.570919]  ? ath11k_ce_alloc_pipes+0x280/0x280 [ath11k]
[  145.570986]  ? tasklet_clear_sched+0x42/0xe0
[  145.571042]  ? tasklet_kill+0xe9/0x1b0
[  145.571095]  ? tasklet_clear_sched+0xe0/0xe0
[  145.571148]  ? irq_has_action+0x120/0x120
[  145.571202]  ath11k_ce_cleanup_pipes+0x45a/0x580 [ath11k]
[  145.571270]  ? ath11k_pci_stop+0x10e/0x170 [ath11k_pci]
[  145.571345]  ath11k_core_stop+0x8a/0xc0 [ath11k]
[  145.571434]  ath11k_core_deinit+0x9e/0x150 [ath11k]
[  145.571499]  ath11k_pci_remove+0xd2/0x260 [ath11k_pci]
[  145.571553]  pci_device_remove+0x9a/0x1c0
[  145.571605]  __device_release_driver+0x332/0x660
[  145.571659]  driver_detach+0x1e7/0x2c0
[  145.571712]  bus_remove_driver+0xe2/0x2d0
[  145.571772]  pci_unregister_driver+0x21/0x250
[  145.571826]  __do_sys_delete_module+0x30a/0x4b0
[  145.571879]  ? free_module+0xac0/0xac0
[  145.571933]  ? lockdep_hardirqs_on_prepare.part.0+0x18c/0x370
[  145.571986]  ? syscall_enter_from_user_mode+0x1d/0x50
[  145.572039]  ? lockdep_hardirqs_on+0x79/0x100
[  145.572097]  do_syscall_64+0x3b/0x90
[  145.572153]  entry_SYSCALL_64_after_hwframe+0x44/0xae

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2

Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220127090117.2024-2-kvalo@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath11k/mhi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath11k/mhi.c b/drivers/net/wireless/ath/ath11k/mhi.c
index 49c0b1ad40a0..f2149241fb13 100644
--- a/drivers/net/wireless/ath/ath11k/mhi.c
+++ b/drivers/net/wireless/ath/ath11k/mhi.c
@@ -519,7 +519,7 @@ static int ath11k_mhi_set_state(struct ath11k_pci *ab_pci,
 		ret = 0;
 		break;
 	case ATH11K_MHI_POWER_ON:
-		ret = mhi_async_power_up(ab_pci->mhi_ctrl);
+		ret = mhi_sync_power_up(ab_pci->mhi_ctrl);
 		break;
 	case ATH11K_MHI_POWER_OFF:
 		mhi_power_down(ab_pci->mhi_ctrl, true);
-- 
2.34.1

[PATCH AUTOSEL 5.15 16/98] net/smc: Send directly when TCP_CORK is cleared

[Sasha Levin]

From: Tony Lu <tonylu@linux.alibaba.com>

[ Upstream commit ea785a1a573b390a150010b3c5b81e1ccd8c98a8 ]

According to the man page of TCP_CORK [1], if set, don't send out
partial frames. All queued partial frames are sent when option is
cleared again.

When applications call setsockopt to disable TCP_CORK, this call is
protected by lock_sock(), and tries to mod_delayed_work() to 0, in order
to send pending data right now. However, the delayed work smc_tx_work is
also protected by lock_sock(). There introduces lock contention for
sending data.

To fix it, send pending data directly which acts like TCP, without
lock_sock() protected in the context of setsockopt (already lock_sock()ed),
and cancel unnecessary dealyed work, which is protected by lock.

[1] https://linux.die.net/man/7/tcp

Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/smc/af_smc.c |  4 ++--
 net/smc/smc_tx.c | 25 +++++++++++++++----------
 net/smc/smc_tx.h |  1 +
 3 files changed, 18 insertions(+), 12 deletions(-)

diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c
index 5c4c0320e822..183b122807b6 100644
--- a/net/smc/af_smc.c
+++ b/net/smc/af_smc.c
@@ -2430,8 +2430,8 @@ static int smc_setsockopt(struct socket *sock, int level, int optname,
 		    sk->sk_state != SMC_CLOSED) {
 			if (!val) {
 				SMC_STAT_INC(smc, cork_cnt);
-				mod_delayed_work(smc->conn.lgr->tx_wq,
-						 &smc->conn.tx_work, 0);
+				smc_tx_pending(&smc->conn);
+				cancel_delayed_work(&smc->conn.tx_work);
 			}
 		}
 		break;
diff --git a/net/smc/smc_tx.c b/net/smc/smc_tx.c
index 738a4a99c827..31ee76131a79 100644
--- a/net/smc/smc_tx.c
+++ b/net/smc/smc_tx.c
@@ -594,27 +594,32 @@ int smc_tx_sndbuf_nonempty(struct smc_connection *conn)
 	return rc;
 }
 
-/* Wakeup sndbuf consumers from process context
- * since there is more data to transmit
- */
-void smc_tx_work(struct work_struct *work)
+void smc_tx_pending(struct smc_connection *conn)
 {
-	struct smc_connection *conn = container_of(to_delayed_work(work),
-						   struct smc_connection,
-						   tx_work);
 	struct smc_sock *smc = container_of(conn, struct smc_sock, conn);
 	int rc;
 
-	lock_sock(&smc->sk);
 	if (smc->sk.sk_err)
-		goto out;
+		return;
 
 	rc = smc_tx_sndbuf_nonempty(conn);
 	if (!rc && conn->local_rx_ctrl.prod_flags.write_blocked &&
 	    !atomic_read(&conn->bytes_to_rcv))
 		conn->local_rx_ctrl.prod_flags.write_blocked = 0;
+}
+
+/* Wakeup sndbuf consumers from process context
+ * since there is more data to transmit
+ */
+void smc_tx_work(struct work_struct *work)
+{
+	struct smc_connection *conn = container_of(to_delayed_work(work),
+						   struct smc_connection,
+						   tx_work);
+	struct smc_sock *smc = container_of(conn, struct smc_sock, conn);
 
-out:
+	lock_sock(&smc->sk);
+	smc_tx_pending(conn);
 	release_sock(&smc->sk);
 }
 
diff --git a/net/smc/smc_tx.h b/net/smc/smc_tx.h
index 07e6ad76224a..a59f370b8b43 100644
--- a/net/smc/smc_tx.h
+++ b/net/smc/smc_tx.h
@@ -27,6 +27,7 @@ static inline int smc_tx_prepared_sends(struct smc_connection *conn)
 	return smc_curs_diff(conn->sndbuf_desc->len, &sent, &prep);
 }
 
+void smc_tx_pending(struct smc_connection *conn);
 void smc_tx_work(struct work_struct *work);
 void smc_tx_init(struct smc_sock *smc);
 int smc_tx_sendmsg(struct smc_sock *smc, struct msghdr *msg, size_t len);
-- 
2.34.1

[PATCH AUTOSEL 5.15 18/98] bpf: Make dst_port field in struct bpf_sock 16-bit wide

[Sasha Levin]

From: Jakub Sitnicki <jakub@cloudflare.com>

[ Upstream commit 4421a582718ab81608d8486734c18083b822390d ]

Menglong Dong reports that the documentation for the dst_port field in
struct bpf_sock is inaccurate and confusing. From the BPF program PoV, the
field is a zero-padded 16-bit integer in network byte order. The value
appears to the BPF user as if laid out in memory as so:

  offsetof(struct bpf_sock, dst_port) + 0  <port MSB>
                                      + 8  <port LSB>
                                      +16  0x00
                                      +24  0x00

32-, 16-, and 8-bit wide loads from the field are all allowed, but only if
the offset into the field is 0.

32-bit wide loads from dst_port are especially confusing. The loaded value,
after converting to host byte order with bpf_ntohl(dst_port), contains the
port number in the upper 16-bits.

Remove the confusion by splitting the field into two 16-bit fields. For
backward compatibility, allow 32-bit wide loads from offsetof(struct
bpf_sock, dst_port).

While at it, allow loads 8-bit loads at offset [0] and [1] from dst_port.

Reported-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20220130115518.213259-2-jakub@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/uapi/linux/bpf.h |  3 ++-
 net/core/filter.c        | 10 +++++++++-
 2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index 791f31dd0abe..b5f3b5a476d1 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -5347,7 +5347,8 @@ struct bpf_sock {
 	__u32 src_ip4;
 	__u32 src_ip6[4];
 	__u32 src_port;		/* host byte order */
-	__u32 dst_port;		/* network byte order */
+	__be16 dst_port;	/* network byte order */
+	__u16 :16;		/* zero padding */
 	__u32 dst_ip4;
 	__u32 dst_ip6[4];
 	__u32 state;
diff --git a/net/core/filter.c b/net/core/filter.c
index 76e406965b6f..a65de7ac60aa 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -7966,6 +7966,7 @@ bool bpf_sock_is_valid_access(int off, int size, enum bpf_access_type type,
 			      struct bpf_insn_access_aux *info)
 {
 	const int size_default = sizeof(__u32);
+	int field_size;
 
 	if (off < 0 || off >= sizeof(struct bpf_sock))
 		return false;
@@ -7977,7 +7978,6 @@ bool bpf_sock_is_valid_access(int off, int size, enum bpf_access_type type,
 	case offsetof(struct bpf_sock, family):
 	case offsetof(struct bpf_sock, type):
 	case offsetof(struct bpf_sock, protocol):
-	case offsetof(struct bpf_sock, dst_port):
 	case offsetof(struct bpf_sock, src_port):
 	case offsetof(struct bpf_sock, rx_queue_mapping):
 	case bpf_ctx_range(struct bpf_sock, src_ip4):
@@ -7986,6 +7986,14 @@ bool bpf_sock_is_valid_access(int off, int size, enum bpf_access_type type,
 	case bpf_ctx_range_till(struct bpf_sock, dst_ip6[0], dst_ip6[3]):
 		bpf_ctx_record_field_size(info, size_default);
 		return bpf_ctx_narrow_access_ok(off, size, size_default);
+	case bpf_ctx_range(struct bpf_sock, dst_port):
+		field_size = size == size_default ?
+			size_default : sizeof_field(struct bpf_sock, dst_port);
+		bpf_ctx_record_field_size(info, field_size);
+		return bpf_ctx_narrow_access_ok(off, size, field_size);
+	case offsetofend(struct bpf_sock, dst_port) ...
+	     offsetof(struct bpf_sock, dst_ip4) - 1:
+		return false;
 	}
 
 	return size == size_default;
-- 
2.34.1

[PATCH AUTOSEL 5.15 23/98] mt76: mt7921: fix crash when startup fails.

[Sasha Levin]

From: Ben Greear <greearb@candelatech.com>

[ Upstream commit 827e7799c61b978fbc2cc9dac66cb62401b2b3f0 ]

If the nic fails to start, it is possible that the
reset_work has already been scheduled.  Ensure the
work item is canceled so we do not have use-after-free
crash in case cleanup is called before the work item
is executed.

This fixes crash on my x86_64 apu2 when mt7921k radio
fails to work.  Radio still fails, but OS does not
crash.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7921/main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/main.c b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
index 9eb90e6f0103..30252f408ddc 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
@@ -224,6 +224,7 @@ static void mt7921_stop(struct ieee80211_hw *hw)
 
 	cancel_delayed_work_sync(&dev->pm.ps_work);
 	cancel_work_sync(&dev->pm.wake_work);
+	cancel_work_sync(&dev->reset_work);
 	mt76_connac_free_pending_tx_skbs(&dev->pm, NULL);
 
 	mt7921_mutex_acquire(dev);
-- 
2.34.1

[PATCH AUTOSEL 5.15 24/98] mt76: dma: initialize skip_unmap in mt76_dma_rx_fill

[Sasha Levin]

From: Lorenzo Bianconi <lorenzo@kernel.org>

[ Upstream commit 577298ec55dfc8b9aece54520f0258c3f93a6573 ]

Even if it is only a false-positive since skip_buf0/skip_buf1 are only
used in mt76_dma_tx_cleanup_idx routine, initialize skip_unmap in
mt76_dma_rx_fill in order to fix the following UBSAN report:

[   13.924906] UBSAN: invalid-load in linux-5.15.0/drivers/net/wireless/mediatek/mt76/dma.c:162:13
[   13.924909] load of value 225 is not a valid value for type '_Bool'
[   13.924912] CPU: 9 PID: 672 Comm: systemd-udevd Not tainted 5.15.0-18-generic #18-Ubuntu
[   13.924914] Hardware name: LENOVO 21A0000CMX/21A0000CMX, BIOS R1MET43W (1.13 ) 11/05/2021
[   13.924915] Call Trace:
[   13.924917]  <TASK>
[   13.924920]  show_stack+0x52/0x58
[   13.924925]  dump_stack_lvl+0x4a/0x5f
[   13.924931]  dump_stack+0x10/0x12
[   13.924932]  ubsan_epilogue+0x9/0x45
[   13.924934]  __ubsan_handle_load_invalid_value.cold+0x44/0x49
[   13.924935]  ? __iommu_dma_map+0x84/0xf0
[   13.924939]  mt76_dma_add_buf.constprop.0.cold+0x23/0x85 [mt76]
[   13.924949]  mt76_dma_rx_fill.isra.0+0x102/0x1f0 [mt76]
[   13.924954]  mt76_dma_init+0xc9/0x150 [mt76]
[   13.924959]  ? mt7921_dma_enable+0x110/0x110 [mt7921e]
[   13.924966]  mt7921_dma_init+0x1e3/0x260 [mt7921e]
[   13.924970]  mt7921_register_device+0x29d/0x510 [mt7921e]
[   13.924975]  mt7921_pci_probe.part.0+0x17f/0x1b0 [mt7921e]
[   13.924980]  mt7921_pci_probe+0x43/0x60 [mt7921e]
[   13.924984]  local_pci_probe+0x4b/0x90
[   13.924987]  pci_device_probe+0x115/0x1f0
[   13.924989]  really_probe+0x21e/0x420
[   13.924992]  __driver_probe_device+0x115/0x190
[   13.924994]  driver_probe_device+0x23/0xc0
[   13.924996]  __driver_attach+0xbd/0x1d0
[   13.924998]  ? __device_attach_driver+0x110/0x110
[   13.924999]  bus_for_each_dev+0x7e/0xc0
[   13.925001]  driver_attach+0x1e/0x20
[   13.925003]  bus_add_driver+0x135/0x200
[   13.925005]  driver_register+0x95/0xf0
[   13.925008]  ? 0xffffffffc0766000
[   13.925010]  __pci_register_driver+0x68/0x70
[   13.925011]  mt7921_pci_driver_init+0x23/0x1000 [mt7921e]
[   13.925015]  do_one_initcall+0x48/0x1d0
[   13.925019]  ? kmem_cache_alloc_trace+0x19e/0x2e0
[   13.925022]  do_init_module+0x62/0x280
[   13.925025]  load_module+0xac9/0xbb0
[   13.925027]  __do_sys_finit_module+0xbf/0x120
[   13.925029]  __x64_sys_finit_module+0x18/0x20
[   13.925030]  do_syscall_64+0x5c/0xc0
[   13.925033]  ? do_syscall_64+0x69/0xc0
[   13.925034]  ? sysvec_reschedule_ipi+0x78/0xe0
[   13.925036]  ? asm_sysvec_reschedule_ipi+0xa/0x20
[   13.925039]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[   13.925040] RIP: 0033:0x7fbf2b90f94d
[   13.925045] RSP: 002b:00007ffe2ec7e5d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[   13.925047] RAX: ffffffffffffffda RBX: 000056106b0634e0 RCX: 00007fbf2b90f94d
[   13.925048] RDX: 0000000000000000 RSI: 00007fbf2baa3441 RDI: 0000000000000013
[   13.925049] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000002
[   13.925050] R10: 0000000000000013 R11: 0000000000000246 R12: 00007fbf2baa3441
[   13.925051] R13: 000056106b062620 R14: 000056106b0610c0 R15: 000056106b0640d0
[   13.925053]  </TASK>

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/dma.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/mediatek/mt76/dma.c b/drivers/net/wireless/mediatek/mt76/dma.c
index 5e1c1506a4c6..7aecde35cb9a 100644
--- a/drivers/net/wireless/mediatek/mt76/dma.c
+++ b/drivers/net/wireless/mediatek/mt76/dma.c
@@ -465,6 +465,7 @@ mt76_dma_rx_fill(struct mt76_dev *dev, struct mt76_queue *q)
 
 		qbuf.addr = addr + offset;
 		qbuf.len = len - offset;
+		qbuf.skip_unmap = false;
 		mt76_dma_add_buf(dev, q, &qbuf, 1, 0, buf, NULL);
 		frames++;
 	}
-- 
2.34.1

[PATCH AUTOSEL 5.15 25/98] cfg80211: don't add non transmitted BSS to 6GHz scanned channels

[Sasha Levin]

From: Avraham Stern <avraham.stern@intel.com>

[ Upstream commit 5666ee154f4696c011dfa8544aaf5591b6b87515 ]

When adding 6GHz channels to scan request based on reported
co-located APs, don't add channels that have only APs with
"non-transmitted" BSSes if they only match the wildcard SSID since
they will be found by probing the "transmitted" BSS.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220202104617.f6ddf099f934.I231e55885d3644f292d00dfe0f42653269f2559e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/scan.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index adc0d14cfd86..8e1e578d64bc 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -702,8 +702,12 @@ static bool cfg80211_find_ssid_match(struct cfg80211_colocated_ap *ap,
 
 	for (i = 0; i < request->n_ssids; i++) {
 		/* wildcard ssid in the scan request */
-		if (!request->ssids[i].ssid_len)
+		if (!request->ssids[i].ssid_len) {
+			if (ap->multi_bss && !ap->transmitted_bssid)
+				continue;
+
 			return true;
+		}
 
 		if (ap->ssid_len &&
 		    ap->ssid_len == request->ssids[i].ssid_len) {
@@ -829,6 +833,9 @@ static int cfg80211_scan_6ghz(struct cfg80211_registered_device *rdev)
 		    !cfg80211_find_ssid_match(ap, request))
 			continue;
 
+		if (!request->n_ssids && ap->multi_bss && !ap->transmitted_bssid)
+			continue;
+
 		cfg80211_scan_req_add_chan(request, chan, true);
 		memcpy(scan_6ghz_params->bssid, ap->bssid, ETH_ALEN);
 		scan_6ghz_params->short_ssid = ap->short_ssid;
-- 
2.34.1

[PATCH AUTOSEL 5.15 26/98] libbpf: Fix build issue with llvm-readelf

[Sasha Levin]

From: Yonghong Song <yhs@fb.com>

[ Upstream commit 0908a66ad1124c1634c33847ac662106f7f2c198 ]

There are cases where clang compiler is packaged in a way
readelf is a symbolic link to llvm-readelf. In such cases,
llvm-readelf will be used instead of default binutils readelf,
and the following error will appear during libbpf build:

  Warning: Num of global symbols in
   /home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/build/libbpf/sharedobjs/libbpf-in.o (367)
   does NOT match with num of versioned symbols in
   /home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/build/libbpf/libbpf.so libbpf.map (383).
   Please make sure all LIBBPF_API symbols are versioned in libbpf.map.
  --- /home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/build/libbpf/libbpf_global_syms.tmp ...
  +++ /home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/build/libbpf/libbpf_versioned_syms.tmp ...
  @@ -324,6 +324,22 @@
   btf__str_by_offset
   btf__type_by_id
   btf__type_cnt
  +LIBBPF_0.0.1
  +LIBBPF_0.0.2
  +LIBBPF_0.0.3
  +LIBBPF_0.0.4
  +LIBBPF_0.0.5
  +LIBBPF_0.0.6
  +LIBBPF_0.0.7
  +LIBBPF_0.0.8
  +LIBBPF_0.0.9
  +LIBBPF_0.1.0
  +LIBBPF_0.2.0
  +LIBBPF_0.3.0
  +LIBBPF_0.4.0
  +LIBBPF_0.5.0
  +LIBBPF_0.6.0
  +LIBBPF_0.7.0
   libbpf_attach_type_by_name
   libbpf_find_kernel_btf
   libbpf_find_vmlinux_btf_id
  make[2]: *** [Makefile:184: check_abi] Error 1
  make[1]: *** [Makefile:140: all] Error 2

The above failure is due to different printouts for some ABS
versioned symbols. For example, with the same libbpf.so,
  $ /bin/readelf --dyn-syms --wide tools/lib/bpf/libbpf.so | grep "LIBBPF" | grep ABS
     134: 0000000000000000     0 OBJECT  GLOBAL DEFAULT  ABS LIBBPF_0.5.0
     202: 0000000000000000     0 OBJECT  GLOBAL DEFAULT  ABS LIBBPF_0.6.0
     ...
  $ /opt/llvm/bin/readelf --dyn-syms --wide tools/lib/bpf/libbpf.so | grep "LIBBPF" | grep ABS
     134: 0000000000000000     0 OBJECT  GLOBAL DEFAULT   ABS LIBBPF_0.5.0@@LIBBPF_0.5.0
     202: 0000000000000000     0 OBJECT  GLOBAL DEFAULT   ABS LIBBPF_0.6.0@@LIBBPF_0.6.0
     ...
The binutils readelf doesn't print out the symbol LIBBPF_* version and llvm-readelf does.
Such a difference caused libbpf build failure with llvm-readelf.

The proposed fix filters out all ABS symbols as they are not part of the comparison.
This works for both binutils readelf and llvm-readelf.

Reported-by: Delyan Kratunov <delyank@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220204214355.502108-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/lib/bpf/Makefile b/tools/lib/bpf/Makefile
index 74c3b73a5fbe..089b73b3cb37 100644
--- a/tools/lib/bpf/Makefile
+++ b/tools/lib/bpf/Makefile
@@ -126,7 +126,7 @@ GLOBAL_SYM_COUNT = $(shell readelf -s --wide $(BPF_IN_SHARED) | \
 			   sort -u | wc -l)
 VERSIONED_SYM_COUNT = $(shell readelf --dyn-syms --wide $(OUTPUT)libbpf.so | \
 			      sed 's/\[.*\]//' | \
-			      awk '/GLOBAL/ && /DEFAULT/ && !/UND/ {print $$NF}' | \
+			      awk '/GLOBAL/ && /DEFAULT/ && !/UND|ABS/ {print $$NF}' | \
 			      grep -Eo '[^ ]+@LIBBPF_' | cut -d@ -f1 | sort -u | wc -l)
 
 CMD_TARGETS = $(LIB_TARGET) $(PC_FILE)
@@ -195,7 +195,7 @@ check_abi: $(OUTPUT)libbpf.so $(VERSION_SCRIPT)
 		    sort -u > $(OUTPUT)libbpf_global_syms.tmp;		 \
 		readelf --dyn-syms --wide $(OUTPUT)libbpf.so |		 \
 		    sed 's/\[.*\]//' |					 \
-		    awk '/GLOBAL/ && /DEFAULT/ && !/UND/ {print $$NF}'|  \
+		    awk '/GLOBAL/ && /DEFAULT/ && !/UND|ABS/ {print $$NF}'|  \
 		    grep -Eo '[^ ]+@LIBBPF_' | cut -d@ -f1 |		 \
 		    sort -u > $(OUTPUT)libbpf_versioned_syms.tmp; 	 \
 		diff -u $(OUTPUT)libbpf_global_syms.tmp			 \
-- 
2.34.1

[PATCH AUTOSEL 5.15 27/98] ipv6: make mc_forwarding atomic

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 145c7a793838add5e004e7d49a67654dc7eba147 ]

This fixes minor data-races in ip6_mc_input() and
batadv_mcast_mla_rtr_flags_softif_get_ipv6()

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/ipv6.h       | 2 +-
 net/batman-adv/multicast.c | 2 +-
 net/ipv6/addrconf.c        | 4 ++--
 net/ipv6/ip6_input.c       | 2 +-
 net/ipv6/ip6mr.c           | 8 ++++----
 5 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h
index 07cba0b3496d..d1f386430795 100644
--- a/include/linux/ipv6.h
+++ b/include/linux/ipv6.h
@@ -51,7 +51,7 @@ struct ipv6_devconf {
 	__s32		use_optimistic;
 #endif
 #ifdef CONFIG_IPV6_MROUTE
-	__s32		mc_forwarding;
+	atomic_t	mc_forwarding;
 #endif
 	__s32		disable_ipv6;
 	__s32		drop_unicast_in_l2_multicast;
diff --git a/net/batman-adv/multicast.c b/net/batman-adv/multicast.c
index 6e3419beca09..2853634a3979 100644
--- a/net/batman-adv/multicast.c
+++ b/net/batman-adv/multicast.c
@@ -134,7 +134,7 @@ static u8 batadv_mcast_mla_rtr_flags_softif_get_ipv6(struct net_device *dev)
 {
 	struct inet6_dev *in6_dev = __in6_dev_get(dev);
 
-	if (in6_dev && in6_dev->cnf.mc_forwarding)
+	if (in6_dev && atomic_read(&in6_dev->cnf.mc_forwarding))
 		return BATADV_NO_FLAGS;
 	else
 		return BATADV_MCAST_WANT_NO_RTR6;
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 1fe27807e471..3a8838b79bb6 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -552,7 +552,7 @@ static int inet6_netconf_fill_devconf(struct sk_buff *skb, int ifindex,
 #ifdef CONFIG_IPV6_MROUTE
 	if ((all || type == NETCONFA_MC_FORWARDING) &&
 	    nla_put_s32(skb, NETCONFA_MC_FORWARDING,
-			devconf->mc_forwarding) < 0)
+			atomic_read(&devconf->mc_forwarding)) < 0)
 		goto nla_put_failure;
 #endif
 	if ((all || type == NETCONFA_PROXY_NEIGH) &&
@@ -5537,7 +5537,7 @@ static inline void ipv6_store_devconf(struct ipv6_devconf *cnf,
 	array[DEVCONF_USE_OPTIMISTIC] = cnf->use_optimistic;
 #endif
 #ifdef CONFIG_IPV6_MROUTE
-	array[DEVCONF_MC_FORWARDING] = cnf->mc_forwarding;
+	array[DEVCONF_MC_FORWARDING] = atomic_read(&cnf->mc_forwarding);
 #endif
 	array[DEVCONF_DISABLE_IPV6] = cnf->disable_ipv6;
 	array[DEVCONF_ACCEPT_DAD] = cnf->accept_dad;
diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c
index 80256717868e..d4b1e2c5aa76 100644
--- a/net/ipv6/ip6_input.c
+++ b/net/ipv6/ip6_input.c
@@ -508,7 +508,7 @@ int ip6_mc_input(struct sk_buff *skb)
 	/*
 	 *      IPv6 multicast router mode is now supported ;)
 	 */
-	if (dev_net(skb->dev)->ipv6.devconf_all->mc_forwarding &&
+	if (atomic_read(&dev_net(skb->dev)->ipv6.devconf_all->mc_forwarding) &&
 	    !(ipv6_addr_type(&hdr->daddr) &
 	      (IPV6_ADDR_LOOPBACK|IPV6_ADDR_LINKLOCAL)) &&
 	    likely(!(IP6CB(skb)->flags & IP6SKB_FORWARDED))) {
diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c
index 6a4065d81aa9..91f1c5f56d5f 100644
--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -739,7 +739,7 @@ static int mif6_delete(struct mr_table *mrt, int vifi, int notify,
 
 	in6_dev = __in6_dev_get(dev);
 	if (in6_dev) {
-		in6_dev->cnf.mc_forwarding--;
+		atomic_dec(&in6_dev->cnf.mc_forwarding);
 		inet6_netconf_notify_devconf(dev_net(dev), RTM_NEWNETCONF,
 					     NETCONFA_MC_FORWARDING,
 					     dev->ifindex, &in6_dev->cnf);
@@ -907,7 +907,7 @@ static int mif6_add(struct net *net, struct mr_table *mrt,
 
 	in6_dev = __in6_dev_get(dev);
 	if (in6_dev) {
-		in6_dev->cnf.mc_forwarding++;
+		atomic_inc(&in6_dev->cnf.mc_forwarding);
 		inet6_netconf_notify_devconf(dev_net(dev), RTM_NEWNETCONF,
 					     NETCONFA_MC_FORWARDING,
 					     dev->ifindex, &in6_dev->cnf);
@@ -1557,7 +1557,7 @@ static int ip6mr_sk_init(struct mr_table *mrt, struct sock *sk)
 	} else {
 		rcu_assign_pointer(mrt->mroute_sk, sk);
 		sock_set_flag(sk, SOCK_RCU_FREE);
-		net->ipv6.devconf_all->mc_forwarding++;
+		atomic_inc(&net->ipv6.devconf_all->mc_forwarding);
 	}
 	write_unlock_bh(&mrt_lock);
 
@@ -1590,7 +1590,7 @@ int ip6mr_sk_done(struct sock *sk)
 			 * so the RCU grace period before sk freeing
 			 * is guaranteed by sk_destruct()
 			 */
-			net->ipv6.devconf_all->mc_forwarding--;
+			atomic_dec(&net->ipv6.devconf_all->mc_forwarding);
 			write_unlock_bh(&mrt_lock);
 			inet6_netconf_notify_devconf(net, RTM_NEWNETCONF,
 						     NETCONFA_MC_FORWARDING,
-- 
2.34.1

[PATCH AUTOSEL 5.15 28/98] net: initialize init_net earlier

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 9c1be1935fb68b2413796cdc03d019b8cf35ab51 ]

While testing a patch that will follow later
("net: add netns refcount tracker to struct nsproxy")
I found that devtmpfs_init() was called before init_net
was initialized.

This is a bug, because devtmpfs_setup() calls
ksys_unshare(CLONE_NEWNS);

This has the effect of increasing init_net refcount,
which will be later overwritten to 1, as part of setup_net(&init_net)

We had too many prior patches [1] trying to work around the root cause.

Really, make sure init_net is in BSS section, and that net_ns_init()
is called earlier at boot time.

Note that another patch ("vfs: add netns refcount tracker
to struct fs_context") also will need net_ns_init() being called
before vfs_caches_init()

As a bonus, this patch saves around 4KB in .data section.

[1]

f8c46cb39079 ("netns: do not call pernet ops for not yet set up init_net namespace")
b5082df8019a ("net: Initialise init_net.count to 1")
734b65417b24 ("net: Statically initialize init_net.dev_base_head")

v2: fixed a build error reported by kernel build bots (CONFIG_NET=n)

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/net_namespace.h |  6 ++++++
 init/main.c                 |  2 ++
 net/core/dev.c              |  3 +--
 net/core/net_namespace.c    | 17 +++++------------
 4 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h
index bb5fa5914032..2ba326f9e004 100644
--- a/include/net/net_namespace.h
+++ b/include/net/net_namespace.h
@@ -479,4 +479,10 @@ static inline void fnhe_genid_bump(struct net *net)
 	atomic_inc(&net->fnhe_genid);
 }
 
+#ifdef CONFIG_NET
+void net_ns_init(void);
+#else
+static inline void net_ns_init(void) {}
+#endif
+
 #endif /* __NET_NET_NAMESPACE_H */
diff --git a/init/main.c b/init/main.c
index bcd132d4e7bd..b340d990d77c 100644
--- a/init/main.c
+++ b/init/main.c
@@ -100,6 +100,7 @@
 #include <linux/kcsan.h>
 #include <linux/init_syscalls.h>
 #include <linux/stackdepot.h>
+#include <net/net_namespace.h>
 
 #include <asm/io.h>
 #include <asm/bugs.h>
@@ -1122,6 +1123,7 @@ asmlinkage __visible void __init __no_sanitize_address start_kernel(void)
 	key_init();
 	security_init();
 	dbg_late_init();
+	net_ns_init();
 	vfs_caches_init();
 	pagecache_init();
 	signals_init();
diff --git a/net/core/dev.c b/net/core/dev.c
index 33dc2a3ff7d7..804aba2228c2 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -11378,8 +11378,7 @@ static int __net_init netdev_init(struct net *net)
 	BUILD_BUG_ON(GRO_HASH_BUCKETS >
 		     8 * sizeof_field(struct napi_struct, gro_bitmask));
 
-	if (net != &init_net)
-		INIT_LIST_HEAD(&net->dev_base_head);
+	INIT_LIST_HEAD(&net->dev_base_head);
 
 	net->dev_name_head = netdev_create_hash();
 	if (net->dev_name_head == NULL)
diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c
index 9702d2b0d920..9745cb6fdf51 100644
--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -44,13 +44,7 @@ EXPORT_SYMBOL_GPL(net_rwsem);
 static struct key_tag init_net_key_domain = { .usage = REFCOUNT_INIT(1) };
 #endif
 
-struct net init_net = {
-	.ns.count	= REFCOUNT_INIT(1),
-	.dev_base_head	= LIST_HEAD_INIT(init_net.dev_base_head),
-#ifdef CONFIG_KEYS
-	.key_domain	= &init_net_key_domain,
-#endif
-};
+struct net init_net;
 EXPORT_SYMBOL(init_net);
 
 static bool init_net_initialized;
@@ -1081,7 +1075,7 @@ static void rtnl_net_notifyid(struct net *net, int cmd, int id, u32 portid,
 	rtnl_set_sk_err(net, RTNLGRP_NSID, err);
 }
 
-static int __init net_ns_init(void)
+void __init net_ns_init(void)
 {
 	struct net_generic *ng;
 
@@ -1102,6 +1096,9 @@ static int __init net_ns_init(void)
 
 	rcu_assign_pointer(init_net.gen, ng);
 
+#ifdef CONFIG_KEYS
+	init_net.key_domain = &init_net_key_domain;
+#endif
 	down_write(&pernet_ops_rwsem);
 	if (setup_net(&init_net, &init_user_ns))
 		panic("Could not setup the initial network namespace");
@@ -1116,12 +1113,8 @@ static int __init net_ns_init(void)
 		      RTNL_FLAG_DOIT_UNLOCKED);
 	rtnl_register(PF_UNSPEC, RTM_GETNSID, rtnl_net_getid, rtnl_net_dumpid,
 		      RTNL_FLAG_DOIT_UNLOCKED);
-
-	return 0;
 }
 
-pure_initcall(net_ns_init);
-
 static void free_exit_list(struct pernet_operations *ops, struct list_head *net_exit_list)
 {
 	ops_pre_exit_list(ops, net_exit_list);
-- 
2.34.1

[PATCH AUTOSEL 5.15 36/98] tcp: Don't acquire inet_listen_hashbucket::lock with disabled BH.

[Sasha Levin]

From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

[ Upstream commit 4f9bf2a2f5aacf988e6d5e56b961ba45c5a25248 ]

Commit
   9652dc2eb9e40 ("tcp: relax listening_hash operations")

removed the need to disable bottom half while acquiring
listening_hash.lock. There are still two callers left which disable
bottom half before the lock is acquired.

On PREEMPT_RT the softirqs are preemptible and local_bh_disable() acts
as a lock to ensure that resources, that are protected by disabling
bottom halves, remain protected.
This leads to a circular locking dependency if the lock acquired with
disabled bottom halves is also acquired with enabled bottom halves
followed by disabling bottom halves. This is the reverse locking order.
It has been observed with inet_listen_hashbucket::lock:

local_bh_disable() + spin_lock(&ilb->lock):
  inet_listen()
    inet_csk_listen_start()
      sk->sk_prot->hash() := inet_hash()
	local_bh_disable()
	__inet_hash()
	  spin_lock(&ilb->lock);
	    acquire(&ilb->lock);

Reverse order: spin_lock(&ilb2->lock) + local_bh_disable():
  tcp_seq_next()
    listening_get_next()
      spin_lock(&ilb2->lock);
	acquire(&ilb2->lock);

  tcp4_seq_show()
    get_tcp4_sock()
      sock_i_ino()
	read_lock_bh(&sk->sk_callback_lock);
	  acquire(softirq_ctrl)	// <---- whoops
	  acquire(&sk->sk_callback_lock)

Drop local_bh_disable() around __inet_hash() which acquires
listening_hash->lock. Split inet_unhash() and acquire the
listen_hashbucket lock without disabling bottom halves; the inet_ehash
lock with disabled bottom halves.

Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lkml.kernel.org/r/12d6f9879a97cd56c09fb53dee343cbb14f7f1f7.camel@gmx.de
Link: https://lkml.kernel.org/r/X9CheYjuXWc75Spa@hirez.programming.kicks-ass.net
Link: https://lore.kernel.org/r/YgQOebeZ10eNx1W6@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/inet_hashtables.c  | 53 ++++++++++++++++++++++---------------
 net/ipv6/inet6_hashtables.c |  5 +---
 2 files changed, 33 insertions(+), 25 deletions(-)

diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c
index 75737267746f..7bd1e10086f0 100644
--- a/net/ipv4/inet_hashtables.c
+++ b/net/ipv4/inet_hashtables.c
@@ -637,7 +637,9 @@ int __inet_hash(struct sock *sk, struct sock *osk)
 	int err = 0;
 
 	if (sk->sk_state != TCP_LISTEN) {
+		local_bh_disable();
 		inet_ehash_nolisten(sk, osk, NULL);
+		local_bh_enable();
 		return 0;
 	}
 	WARN_ON(!sk_unhashed(sk));
@@ -669,45 +671,54 @@ int inet_hash(struct sock *sk)
 {
 	int err = 0;
 
-	if (sk->sk_state != TCP_CLOSE) {
-		local_bh_disable();
+	if (sk->sk_state != TCP_CLOSE)
 		err = __inet_hash(sk, NULL);
-		local_bh_enable();
-	}
 
 	return err;
 }
 EXPORT_SYMBOL_GPL(inet_hash);
 
-void inet_unhash(struct sock *sk)
+static void __inet_unhash(struct sock *sk, struct inet_listen_hashbucket *ilb)
 {
-	struct inet_hashinfo *hashinfo = sk->sk_prot->h.hashinfo;
-	struct inet_listen_hashbucket *ilb = NULL;
-	spinlock_t *lock;
-
 	if (sk_unhashed(sk))
 		return;
 
-	if (sk->sk_state == TCP_LISTEN) {
-		ilb = &hashinfo->listening_hash[inet_sk_listen_hashfn(sk)];
-		lock = &ilb->lock;
-	} else {
-		lock = inet_ehash_lockp(hashinfo, sk->sk_hash);
-	}
-	spin_lock_bh(lock);
-	if (sk_unhashed(sk))
-		goto unlock;
-
 	if (rcu_access_pointer(sk->sk_reuseport_cb))
 		reuseport_stop_listen_sock(sk);
 	if (ilb) {
+		struct inet_hashinfo *hashinfo = sk->sk_prot->h.hashinfo;
+
 		inet_unhash2(hashinfo, sk);
 		ilb->count--;
 	}
 	__sk_nulls_del_node_init_rcu(sk);
 	sock_prot_inuse_add(sock_net(sk), sk->sk_prot, -1);
-unlock:
-	spin_unlock_bh(lock);
+}
+
+void inet_unhash(struct sock *sk)
+{
+	struct inet_hashinfo *hashinfo = sk->sk_prot->h.hashinfo;
+
+	if (sk_unhashed(sk))
+		return;
+
+	if (sk->sk_state == TCP_LISTEN) {
+		struct inet_listen_hashbucket *ilb;
+
+		ilb = &hashinfo->listening_hash[inet_sk_listen_hashfn(sk)];
+		/* Don't disable bottom halves while acquiring the lock to
+		 * avoid circular locking dependency on PREEMPT_RT.
+		 */
+		spin_lock(&ilb->lock);
+		__inet_unhash(sk, ilb);
+		spin_unlock(&ilb->lock);
+	} else {
+		spinlock_t *lock = inet_ehash_lockp(hashinfo, sk->sk_hash);
+
+		spin_lock_bh(lock);
+		__inet_unhash(sk, NULL);
+		spin_unlock_bh(lock);
+	}
 }
 EXPORT_SYMBOL_GPL(inet_unhash);
 
diff --git a/net/ipv6/inet6_hashtables.c b/net/ipv6/inet6_hashtables.c
index 67c9114835c8..0a2e7f228391 100644
--- a/net/ipv6/inet6_hashtables.c
+++ b/net/ipv6/inet6_hashtables.c
@@ -333,11 +333,8 @@ int inet6_hash(struct sock *sk)
 {
 	int err = 0;
 
-	if (sk->sk_state != TCP_CLOSE) {
-		local_bh_disable();
+	if (sk->sk_state != TCP_CLOSE)
 		err = __inet_hash(sk, NULL);
-		local_bh_enable();
-	}
 
 	return err;
 }
-- 
2.34.1

[PATCH AUTOSEL 5.15 42/98] net/mlx5e: Disable TX queues before registering the netdev

[Sasha Levin]

From: Maxim Mikityanskiy <maximmi@nvidia.com>

[ Upstream commit d08c6e2a4d0308a7922d7ef3b1b3af45d4096aad ]

Normally, the queues are disabled when the channels are deactivated, and
enabled when the channels are activated. However, on register, the
channels are not active, but the queues are enabled by default. This
change fixes it, preventing mlx5e_xmit from running when the channels
are deactivated in the beginning.

Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index f075bb8ccd00..01301bee420c 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -4914,6 +4914,7 @@ mlx5e_create_netdev(struct mlx5_core_dev *mdev, const struct mlx5e_profile *prof
 	}
 
 	netif_carrier_off(netdev);
+	netif_tx_disable(netdev);
 	dev_net_set(netdev, mlx5_core_net(mdev));
 
 	return netdev;
-- 
2.34.1

[PATCH AUTOSEL 5.15 44/98] iwlwifi: mvm: Correctly set fragmented EBS

[Sasha Levin]

From: Ilan Peer <ilan.peer@intel.com>

[ Upstream commit d8d4dd26b9e0469baf5017f0544d852fd4e3fb6d ]

Currently, fragmented EBS was set for a channel only if the 'hb_type'
was set to fragmented or balanced scan. However, 'hb_type' is set only
in case of CDB, and thus fragmented EBS is never set for a channel for
non-CDB devices. Fix it.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220204122220.a6165ac9b9d5.I654eafa62fd647030ae6d4f07f32c96c3171decb@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/scan.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
index 5461bf399959..65e382756de6 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
@@ -1890,7 +1890,10 @@ static u8 iwl_mvm_scan_umac_chan_flags_v2(struct iwl_mvm *mvm,
 			IWL_SCAN_CHANNEL_FLAG_CACHE_ADD;
 
 	/* set fragmented ebs for fragmented scan on HB channels */
-	if (iwl_mvm_is_scan_fragmented(params->hb_type))
+	if ((!iwl_mvm_is_cdb_supported(mvm) &&
+	     iwl_mvm_is_scan_fragmented(params->type)) ||
+	    (iwl_mvm_is_cdb_supported(mvm) &&
+	     iwl_mvm_is_scan_fragmented(params->hb_type)))
 		flags |= IWL_SCAN_CHANNEL_FLAG_EBS_FRAG;
 
 	return flags;
-- 
2.34.1

[PATCH AUTOSEL 5.15 45/98] iwlwifi: mvm: Passively scan non PSC channels only when requested so

[Sasha Levin]

From: Ilan Peer <ilan.peer@intel.com>

[ Upstream commit 9966904e9472703a05861f343157cd78f47514fd ]

Non PSC channels should generally be scanned based on information about
collocated APs obtained during scan on legacy bands, and otherwise
should not be scanned unless specifically requested so (as there are
relatively many non PSC channels, scanning them passively is time consuming
and interferes with regular data traffic).

Thus, modify the scan logic to avoid passively scanning PSC channels
if there is no information about collocated APs and the scan is not
a passive scan.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220204122220.457da4cc95eb.Ic98472bab5f5475f1e102547644caaae89ce4c4a@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/scan.c | 42 ++++++++++++++-----
 1 file changed, 32 insertions(+), 10 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
index 65e382756de6..f1217e2b7a11 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
@@ -1733,27 +1733,37 @@ iwl_mvm_umac_scan_fill_6g_chan_list(struct iwl_mvm *mvm,
 }
 
 /* TODO: this function can be merged with iwl_mvm_scan_umac_fill_ch_p_v6 */
-static void
-iwl_mvm_umac_scan_cfg_channels_v6_6g(struct iwl_mvm_scan_params *params,
+static u32
+iwl_mvm_umac_scan_cfg_channels_v6_6g(struct iwl_mvm *mvm,
+				     struct iwl_mvm_scan_params *params,
 				     u32 n_channels,
 				     struct iwl_scan_probe_params_v4 *pp,
 				     struct iwl_scan_channel_params_v6 *cp,
 				     enum nl80211_iftype vif_type)
 {
-	struct iwl_scan_channel_cfg_umac *channel_cfg = cp->channel_config;
 	int i;
 	struct cfg80211_scan_6ghz_params *scan_6ghz_params =
 		params->scan_6ghz_params;
+	u32 ch_cnt;
 
-	for (i = 0; i < params->n_channels; i++) {
+	for (i = 0, ch_cnt = 0; i < params->n_channels; i++) {
 		struct iwl_scan_channel_cfg_umac *cfg =
-			&cp->channel_config[i];
+			&cp->channel_config[ch_cnt];
 
 		u32 s_ssid_bitmap = 0, bssid_bitmap = 0, flags = 0;
 		u8 j, k, s_max = 0, b_max = 0, n_used_bssid_entries;
 		bool force_passive, found = false, allow_passive = true,
 		     unsolicited_probe_on_chan = false, psc_no_listen = false;
 
+		/*
+		 * Avoid performing passive scan on non PSC channels unless the
+		 * scan is specifically a passive scan, i.e., no SSIDs
+		 * configured in the scan command.
+		 */
+		if (!cfg80211_channel_is_psc(params->channels[i]) &&
+		    !params->n_6ghz_params && params->n_ssids)
+			continue;
+
 		cfg->v1.channel_num = params->channels[i]->hw_value;
 		cfg->v2.band = 2;
 		cfg->v2.iter_count = 1;
@@ -1872,8 +1882,16 @@ iwl_mvm_umac_scan_cfg_channels_v6_6g(struct iwl_mvm_scan_params *params,
 		    (!flags && !cfg80211_channel_is_psc(params->channels[i])))
 			flags |= IWL_UHB_CHAN_CFG_FLAG_FORCE_PASSIVE;
 
-		channel_cfg[i].flags |= cpu_to_le32(flags);
+		cfg->flags |= cpu_to_le32(flags);
+		ch_cnt++;
 	}
+
+	if (params->n_channels > ch_cnt)
+		IWL_DEBUG_SCAN(mvm,
+			       "6GHz: reducing number channels: (%u->%u)\n",
+			       params->n_channels, ch_cnt);
+
+	return ch_cnt;
 }
 
 static u8 iwl_mvm_scan_umac_chan_flags_v2(struct iwl_mvm *mvm,
@@ -2406,10 +2424,14 @@ static int iwl_mvm_scan_umac_v14(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 	if (ret)
 		return ret;
 
-	iwl_mvm_umac_scan_cfg_channels_v6_6g(params,
-					     params->n_channels,
-					     pb, cp, vif->type);
-	cp->count = params->n_channels;
+	cp->count = iwl_mvm_umac_scan_cfg_channels_v6_6g(mvm, params,
+							 params->n_channels,
+							 pb, cp, vif->type);
+	if (!cp->count) {
+		mvm->scan_uid_status[uid] = 0;
+		return -EINVAL;
+	}
+
 	if (!params->n_ssids ||
 	    (params->n_ssids == 1 && !params->ssids[0].ssid_len))
 		cp->flags |= IWL_SCAN_CHANNEL_FLAG_6G_PSC_NO_FILTER;
-- 
2.34.1

[PATCH AUTOSEL 5.15 46/98] iwlwifi: mvm: move only to an enabled channel

[Sasha Levin]

From: Miri Korenblit <miriam.rachel.korenblit@intel.com>

[ Upstream commit e04135c07755d001b5cde61048c69a7cc84bb94b ]

During disassociation we're decreasing the phy's ref count.
If the ref count becomes 0, we're configuring the phy ctxt
to the default channel (the lowest channel which the device
can operate on). Currently we're not checking whether the
the default channel is enabled or not. Fix it by configuring
the phy ctxt to the lowest channel which is enabled.

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220210181930.03f281b6a6bc.I5b63d43ec41996d599e6f37ec3f32e878b3e405e@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/intel/iwlwifi/mvm/phy-ctxt.c | 31 +++++++++++++------
 1 file changed, 22 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/phy-ctxt.c b/drivers/net/wireless/intel/iwlwifi/mvm/phy-ctxt.c
index 035336a9e755..6d82725cb87d 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/phy-ctxt.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/phy-ctxt.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
 /*
- * Copyright (C) 2012-2014, 2018-2021 Intel Corporation
+ * Copyright (C) 2012-2014, 2018-2022 Intel Corporation
  * Copyright (C) 2013-2014 Intel Mobile Communications GmbH
  * Copyright (C) 2017 Intel Deutschland GmbH
  */
@@ -295,18 +295,31 @@ void iwl_mvm_phy_ctxt_unref(struct iwl_mvm *mvm, struct iwl_mvm_phy_ctxt *ctxt)
 	 * otherwise we might not be able to reuse this phy.
 	 */
 	if (ctxt->ref == 0) {
-		struct ieee80211_channel *chan;
+		struct ieee80211_channel *chan = NULL;
 		struct cfg80211_chan_def chandef;
-		struct ieee80211_supported_band *sband = NULL;
-		enum nl80211_band band = NL80211_BAND_2GHZ;
+		struct ieee80211_supported_band *sband;
+		enum nl80211_band band;
+		int channel;
 
-		while (!sband && band < NUM_NL80211_BANDS)
-			sband = mvm->hw->wiphy->bands[band++];
+		for (band = NL80211_BAND_2GHZ; band < NUM_NL80211_BANDS; band++) {
+			sband = mvm->hw->wiphy->bands[band];
 
-		if (WARN_ON(!sband))
-			return;
+			if (!sband)
+				continue;
+
+			for (channel = 0; channel < sband->n_channels; channel++)
+				if (!(sband->channels[channel].flags &
+						IEEE80211_CHAN_DISABLED)) {
+					chan = &sband->channels[channel];
+					break;
+				}
 
-		chan = &sband->channels[0];
+			if (chan)
+				break;
+		}
+
+		if (WARN_ON(!chan))
+			return;
 
 		cfg80211_chandef_create(&chandef, chan, NL80211_CHAN_NO_HT);
 		iwl_mvm_phy_ctxt_changed(mvm, ctxt, &chandef, 1, 1);
-- 
2.34.1

[PATCH AUTOSEL 5.15 48/98] ipv4: Invalidate neighbour for broadcast address upon address addition

[Sasha Levin]

From: Ido Schimmel <idosch@nvidia.com>

[ Upstream commit 0c51e12e218f20b7d976158fdc18019627326f7a ]

In case user space sends a packet destined to a broadcast address when a
matching broadcast route is not configured, the kernel will create a
unicast neighbour entry that will never be resolved [1].

When the broadcast route is configured, the unicast neighbour entry will
not be invalidated and continue to linger, resulting in packets being
dropped.

Solve this by invalidating unresolved neighbour entries for broadcast
addresses after routes for these addresses are internally configured by
the kernel. This allows the kernel to create a broadcast neighbour entry
following the next route lookup.

Another possible solution that is more generic but also more complex is
to have the ARP code register a listener to the FIB notification chain
and invalidate matching neighbour entries upon the addition of broadcast
routes.

It is also possible to wave off the issue as a user space problem, but
it seems a bit excessive to expect user space to be that intimately
familiar with the inner workings of the FIB/neighbour kernel code.

[1] https://lore.kernel.org/netdev/55a04a8f-56f3-f73c-2aea-2195923f09d1@huawei.com/

Reported-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/arp.h       | 1 +
 net/ipv4/arp.c          | 9 +++++++--
 net/ipv4/fib_frontend.c | 5 ++++-
 3 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/include/net/arp.h b/include/net/arp.h
index 4950191f6b2b..4a23a97195f3 100644
--- a/include/net/arp.h
+++ b/include/net/arp.h
@@ -71,6 +71,7 @@ void arp_send(int type, int ptype, __be32 dest_ip,
 	      const unsigned char *src_hw, const unsigned char *th);
 int arp_mc_map(__be32 addr, u8 *haddr, struct net_device *dev, int dir);
 void arp_ifdown(struct net_device *dev);
+int arp_invalidate(struct net_device *dev, __be32 ip, bool force);
 
 struct sk_buff *arp_create(int type, int ptype, __be32 dest_ip,
 			   struct net_device *dev, __be32 src_ip,
diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c
index 922dd73e5740..83a47998c4b1 100644
--- a/net/ipv4/arp.c
+++ b/net/ipv4/arp.c
@@ -1116,13 +1116,18 @@ static int arp_req_get(struct arpreq *r, struct net_device *dev)
 	return err;
 }
 
-static int arp_invalidate(struct net_device *dev, __be32 ip)
+int arp_invalidate(struct net_device *dev, __be32 ip, bool force)
 {
 	struct neighbour *neigh = neigh_lookup(&arp_tbl, &ip, dev);
 	int err = -ENXIO;
 	struct neigh_table *tbl = &arp_tbl;
 
 	if (neigh) {
+		if ((neigh->nud_state & NUD_VALID) && !force) {
+			neigh_release(neigh);
+			return 0;
+		}
+
 		if (neigh->nud_state & ~NUD_NOARP)
 			err = neigh_update(neigh, NULL, NUD_FAILED,
 					   NEIGH_UPDATE_F_OVERRIDE|
@@ -1169,7 +1174,7 @@ static int arp_req_delete(struct net *net, struct arpreq *r,
 		if (!dev)
 			return -EINVAL;
 	}
-	return arp_invalidate(dev, ip);
+	return arp_invalidate(dev, ip, true);
 }
 
 /*
diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c
index 4d61ddd8a0ec..1eb7795edb9d 100644
--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -1112,9 +1112,11 @@ void fib_add_ifaddr(struct in_ifaddr *ifa)
 		return;
 
 	/* Add broadcast address, if it is explicitly assigned. */
-	if (ifa->ifa_broadcast && ifa->ifa_broadcast != htonl(0xFFFFFFFF))
+	if (ifa->ifa_broadcast && ifa->ifa_broadcast != htonl(0xFFFFFFFF)) {
 		fib_magic(RTM_NEWROUTE, RTN_BROADCAST, ifa->ifa_broadcast, 32,
 			  prim, 0);
+		arp_invalidate(dev, ifa->ifa_broadcast, false);
+	}
 
 	if (!ipv4_is_zeronet(prefix) && !(ifa->ifa_flags & IFA_F_SECONDARY) &&
 	    (prefix != addr || ifa->ifa_prefixlen < 32)) {
@@ -1128,6 +1130,7 @@ void fib_add_ifaddr(struct in_ifaddr *ifa)
 		if (ifa->ifa_prefixlen < 31) {
 			fib_magic(RTM_NEWROUTE, RTN_BROADCAST, prefix | ~mask,
 				  32, prim, 0);
+			arp_invalidate(dev, prefix | ~mask, false);
 		}
 	}
 }
-- 
2.34.1

[PATCH AUTOSEL 5.15 58/98] mt76: mt7915: fix injected MPDU transmission to not use HW A-MSDU

[Sasha Levin]

From: Johan Almbladh <johan.almbladh@anyfinetworks.com>

[ Upstream commit 28225a6ef80ebf46c46e5fbd5b1ee231a0b2b5b7 ]

Before, the hardware would be allowed to transmit injected 802.11 MPDUs
as A-MSDU. This resulted in corrupted frames being transmitted. Now,
injected MPDUs are transmitted as-is, without A-MSDU.

The fix was verified with frame injection on MT7915 hardware, both with
and without the injected frame being encrypted.

If the hardware cannot do A-MSDU aggregation on MPDUs, this problem
would also be present in the TX path where mac80211 does the 802.11
encapsulation. However, I have not observed any such problem when
disabling IEEE80211_HW_SUPPORTS_TX_ENCAP_OFFLOAD to force that mode.
Therefore this fix is isolated to injected frames only.

The same A-MSDU logic is also present in the mt7921 driver, so it is
likely that this fix should be applied there too. I do not have access
to mt7921 hardware so I have not been able to test that.

Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7915/mac.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
index ff613d705611..7691292526e0 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
@@ -899,6 +899,7 @@ mt7915_mac_write_txwi_80211(struct mt7915_dev *dev, __le32 *txwi,
 		val = MT_TXD3_SN_VALID |
 		      FIELD_PREP(MT_TXD3_SEQ, IEEE80211_SEQ_TO_SN(seqno));
 		txwi[3] |= cpu_to_le32(val);
+		txwi[7] &= ~cpu_to_le32(MT_TXD7_HW_AMSDU);
 	}
 
 	val = FIELD_PREP(MT_TXD7_TYPE, fc_type) |
-- 
2.34.1

[PATCH AUTOSEL 5.15 61/98] mt76: mt7615: Fix assigning negative values to unsigned variable

[Sasha Levin]

From: Yang Li <yang.lee@linux.alibaba.com>

[ Upstream commit 9273ffcc9a11942bd586bb42584337ef3962b692 ]

Smatch reports the following:
drivers/net/wireless/mediatek/mt76/mt7615/mac.c:1865
mt7615_mac_adjust_sensitivity() warn: assigning (-110) to unsigned
variable 'def_th'
drivers/net/wireless/mediatek/mt76/mt7615/mac.c:1865
mt7615_mac_adjust_sensitivity() warn: assigning (-98) to unsigned
variable 'def_th'

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
index f2704149834a..1f0507692174 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
@@ -1732,7 +1732,7 @@ mt7615_mac_adjust_sensitivity(struct mt7615_phy *phy,
 	struct mt7615_dev *dev = phy->dev;
 	int false_cca = ofdm ? phy->false_cca_ofdm : phy->false_cca_cck;
 	bool ext_phy = phy != &dev->phy;
-	u16 def_th = ofdm ? -98 : -110;
+	s16 def_th = ofdm ? -98 : -110;
 	bool update = false;
 	s8 *sensitivity;
 	int signal;
-- 
2.34.1

[PATCH AUTOSEL 5.15 65/98] net/smc: correct settings of RMB window update limit

[Sasha Levin]

From: Dust Li <dust.li@linux.alibaba.com>

[ Upstream commit 6bf536eb5c8ca011d1ff57b5c5f7c57ceac06a37 ]

rmbe_update_limit is used to limit announcing receive
window updating too frequently. RFC7609 request a minimal
increase in the window size of 10% of the receive buffer
space. But current implementation used:

  min_t(int, rmbe_size / 10, SOCK_MIN_SNDBUF / 2)

and SOCK_MIN_SNDBUF / 2 == 2304 Bytes, which is almost
always less then 10% of the receive buffer space.

This causes the receiver always sending CDC message to
update its consumer cursor when it consumes more then 2K
of data. And as a result, we may encounter something like
"TCP silly window syndrome" when sending 2.5~8K message.

This patch fixes this using max(rmbe_size / 10, SOCK_MIN_SNDBUF / 2).

With this patch and SMC autocorking enabled, qperf 2K/4K/8K
tcp_bw test shows 45%/75%/40% increase in throughput respectively.

Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/smc/smc_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/smc/smc_core.c b/net/smc/smc_core.c
index dee336eef6d2..7401ec67ebcf 100644
--- a/net/smc/smc_core.c
+++ b/net/smc/smc_core.c
@@ -1822,7 +1822,7 @@ static struct smc_buf_desc *smc_buf_get_slot(int compressed_bufsize,
  */
 static inline int smc_rmb_wnd_update_limit(int rmbe_size)
 {
-	return min_t(int, rmbe_size / 10, SOCK_MIN_SNDBUF / 2);
+	return max_t(int, rmbe_size / 10, SOCK_MIN_SNDBUF / 2);
 }
 
 /* map an rmb buf to a link */
-- 
2.34.1

[PATCH AUTOSEL 5.15 67/98] macvtap: advertise link netns via netlink

[Sasha Levin]

From: Sven Eckelmann <sven@narfation.org>

[ Upstream commit a02192151b7dbf855084c38dca380d77c7658353 ]

Assign rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is
added to rtnetlink messages. This fixes iproute2 which otherwise resolved
the link interface to an interface in the wrong namespace.

Test commands:

  ip netns add nst
  ip link add dummy0 type dummy
  ip link add link macvtap0 link dummy0 type macvtap
  ip link set macvtap0 netns nst
  ip -netns nst link show macvtap0

Before:

  10: macvtap0@gre0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 500
      link/ether 5e:8f:ae:1d:60:50 brd ff:ff:ff:ff:ff:ff

After:

  10: macvtap0@if2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 500
      link/ether 5e:8f:ae:1d:60:50 brd ff:ff:ff:ff:ff:ff link-netnsid 0

Reported-by: Leonardo Mörlein <freifunk@irrelefant.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Link: https://lore.kernel.org/r/20220228003240.1337426-1-sven@narfation.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/macvtap.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c
index 694e2f5dbbe5..39801c31e507 100644
--- a/drivers/net/macvtap.c
+++ b/drivers/net/macvtap.c
@@ -133,11 +133,17 @@ static void macvtap_setup(struct net_device *dev)
 	dev->tx_queue_len = TUN_READQ_SIZE;
 }
 
+static struct net *macvtap_link_net(const struct net_device *dev)
+{
+	return dev_net(macvlan_dev_real_dev(dev));
+}
+
 static struct rtnl_link_ops macvtap_link_ops __read_mostly = {
 	.kind		= "macvtap",
 	.setup		= macvtap_setup,
 	.newlink	= macvtap_newlink,
 	.dellink	= macvtap_dellink,
+	.get_link_net	= macvtap_link_net,
 	.priv_size      = sizeof(struct macvtap_dev),
 };
 
-- 
2.34.1

[PATCH AUTOSEL 5.15 68/98] tuntap: add sanity checks about msg_controllen in sendmsg

[Sasha Levin]

From: Harold Huang <baymaxhuang@gmail.com>

[ Upstream commit 74a335a07a17d131b9263bfdbdcb5e40673ca9ca ]

In patch [1], tun_msg_ctl was added to allow pass batched xdp buffers to
tun_sendmsg. Although we donot use msg_controllen in this path, we should
check msg_controllen to make sure the caller pass a valid msg_ctl.

[1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=fe8dd45bb7556246c6b76277b1ba4296c91c2505

Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Harold Huang <baymaxhuang@gmail.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20220303022441.383865-1-baymaxhuang@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/tap.c   | 3 ++-
 drivers/net/tun.c   | 3 ++-
 drivers/vhost/net.c | 1 +
 3 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/tap.c b/drivers/net/tap.c
index 8e3a28ba6b28..ba2ef5437e16 100644
--- a/drivers/net/tap.c
+++ b/drivers/net/tap.c
@@ -1198,7 +1198,8 @@ static int tap_sendmsg(struct socket *sock, struct msghdr *m,
 	struct xdp_buff *xdp;
 	int i;
 
-	if (ctl && (ctl->type == TUN_MSG_PTR)) {
+	if (m->msg_controllen == sizeof(struct tun_msg_ctl) &&
+	    ctl && ctl->type == TUN_MSG_PTR) {
 		for (i = 0; i < ctl->num; i++) {
 			xdp = &((struct xdp_buff *)ctl->ptr)[i];
 			tap_get_user_xdp(q, xdp);
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 45a67e72a02c..02de8d998bfa 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -2489,7 +2489,8 @@ static int tun_sendmsg(struct socket *sock, struct msghdr *m, size_t total_len)
 	if (!tun)
 		return -EBADFD;
 
-	if (ctl && (ctl->type == TUN_MSG_PTR)) {
+	if (m->msg_controllen == sizeof(struct tun_msg_ctl) &&
+	    ctl && ctl->type == TUN_MSG_PTR) {
 		struct tun_page tpage;
 		int n = ctl->num;
 		int flush = 0;
diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index 28ef323882fb..792ab5f23647 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -473,6 +473,7 @@ static void vhost_tx_batch(struct vhost_net *net,
 		goto signal_used;
 
 	msghdr->msg_control = &ctl;
+	msghdr->msg_controllen = sizeof(ctl);
 	err = sock->ops->sendmsg(sock, msghdr, 0);
 	if (unlikely(err < 0)) {
 		vq_err(&nvq->vq, "Fail to batch sending packets\n");
-- 
2.34.1

[PATCH AUTOSEL 5.15 70/98] Bluetooth: Fix not checking for valid hdev on bt_dev_{info,warn,err,dbg}

[Sasha Levin]

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

[ Upstream commit 9b392e0e0b6d026da5a62bb79a08f32e27af858e ]

This fixes attemting to print hdev->name directly which causes them to
print an error:

kernel: read_version:367: (efault): sock 000000006a3008f2

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/bluetooth/bluetooth.h | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
index 9125effbf448..3fecc4a411a1 100644
--- a/include/net/bluetooth/bluetooth.h
+++ b/include/net/bluetooth/bluetooth.h
@@ -180,19 +180,21 @@ void bt_err_ratelimited(const char *fmt, ...);
 #define BT_DBG(fmt, ...)	pr_debug(fmt "\n", ##__VA_ARGS__)
 #endif
 
+#define bt_dev_name(hdev) ((hdev) ? (hdev)->name : "null")
+
 #define bt_dev_info(hdev, fmt, ...)				\
-	BT_INFO("%s: " fmt, (hdev)->name, ##__VA_ARGS__)
+	BT_INFO("%s: " fmt, bt_dev_name(hdev), ##__VA_ARGS__)
 #define bt_dev_warn(hdev, fmt, ...)				\
-	BT_WARN("%s: " fmt, (hdev)->name, ##__VA_ARGS__)
+	BT_WARN("%s: " fmt, bt_dev_name(hdev), ##__VA_ARGS__)
 #define bt_dev_err(hdev, fmt, ...)				\
-	BT_ERR("%s: " fmt, (hdev)->name, ##__VA_ARGS__)
+	BT_ERR("%s: " fmt, bt_dev_name(hdev), ##__VA_ARGS__)
 #define bt_dev_dbg(hdev, fmt, ...)				\
-	BT_DBG("%s: " fmt, (hdev)->name, ##__VA_ARGS__)
+	BT_DBG("%s: " fmt, bt_dev_name(hdev), ##__VA_ARGS__)
 
 #define bt_dev_warn_ratelimited(hdev, fmt, ...)			\
-	bt_warn_ratelimited("%s: " fmt, (hdev)->name, ##__VA_ARGS__)
+	bt_warn_ratelimited("%s: " fmt, bt_dev_name(hdev), ##__VA_ARGS__)
 #define bt_dev_err_ratelimited(hdev, fmt, ...)			\
-	bt_err_ratelimited("%s: " fmt, (hdev)->name, ##__VA_ARGS__)
+	bt_err_ratelimited("%s: " fmt, bt_dev_name(hdev), ##__VA_ARGS__)
 
 /* Connection and socket states */
 enum {
-- 
2.34.1

[PATCH AUTOSEL 5.15 71/98] Bluetooth: use memset avoid memory leaks

[Sasha Levin]

From: "Minghao Chi (CGEL ZTE)" <chi.minghao@zte.com.cn>

[ Upstream commit d3715b2333e9a21692ba16ef8645eda584a9515d ]

Use memset to initialize structs to prevent memory leaks
in l2cap_ecred_connect

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/l2cap_core.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 77ba68209dbd..c57a45df7a26 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -1436,6 +1436,7 @@ static void l2cap_ecred_connect(struct l2cap_chan *chan)
 
 	l2cap_ecred_init(chan, 0);
 
+	memset(&data, 0, sizeof(data));
 	data.pdu.req.psm     = chan->psm;
 	data.pdu.req.mtu     = cpu_to_le16(chan->imtu);
 	data.pdu.req.mps     = cpu_to_le16(chan->mps);
-- 
2.34.1

[PATCH AUTOSEL 5.15 72/98] bnxt_en: Eliminate unintended link toggle during FW reset

[Sasha Levin]

From: Michael Chan <michael.chan@broadcom.com>

[ Upstream commit 7c492a2530c1f05441da541307c2534230dfd59b ]

If the flow control settings have been changed, a subsequent FW reset
may cause the ethernet link to toggle unnecessarily.  This link toggle
will increase the down time by a few seconds.

The problem is caused by bnxt_update_phy_setting() detecting a false
mismatch in the flow control settings between the stored software
settings and the current FW settings after the FW reset.  This mismatch
is caused by the AUTONEG bit added to link_info->req_flow_ctrl in an
inconsistent way in bnxt_set_pauseparam() in autoneg mode.  The AUTONEG
bit should not be added to link_info->req_flow_ctrl.

Reviewed-by: Colin Winegarden <colin.winegarden@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index af7de9ee66cf..0f276ce2d1eb 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -2074,9 +2074,7 @@ static int bnxt_set_pauseparam(struct net_device *dev,
 		}
 
 		link_info->autoneg |= BNXT_AUTONEG_FLOW_CTRL;
-		if (bp->hwrm_spec_code >= 0x10201)
-			link_info->req_flow_ctrl =
-				PORT_PHY_CFG_REQ_AUTO_PAUSE_AUTONEG_PAUSE;
+		link_info->req_flow_ctrl = 0;
 	} else {
 		/* when transition from auto pause to force pause,
 		 * force a link change
-- 
2.34.1

[PATCH AUTOSEL 5.15 76/98] powerpc/64e: Tie PPC_BOOK3E_64 to PPC_FSL_BOOK3E

[Sasha Levin]

From: Michael Ellerman <mpe@ellerman.id.au>

[ Upstream commit 1a76e520ee1831a81dabf8a9a58c6453f700026e ]

Since the IBM A2 CPU support was removed, see commit
fb5a515704d7 ("powerpc: Remove platforms/wsp and associated pieces"),
the only 64-bit Book3E CPUs we support are Freescale (NXP) ones.

However our Kconfig still allows configurating a kernel that has 64-bit
Book3E support, but no Freescale CPU support enabled. Such a kernel
would never boot, it doesn't know about any CPUs.

It also causes build errors, as reported by lkp, because
PPC_BARRIER_NOSPEC is not enabled in such a configuration:

  powerpc64-linux-ld: arch/powerpc/net/bpf_jit_comp64.o:(.toc+0x0):
  undefined reference to `powerpc_security_features'

To fix this, force PPC_FSL_BOOK3E to be selected whenever we are
building a 64-bit Book3E kernel.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220304061222.2478720-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/Kconfig.cputype | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index a208997ade88..87a95cbff2f3 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -111,6 +111,7 @@ config PPC_BOOK3S_64
 
 config PPC_BOOK3E_64
 	bool "Embedded processors"
+	select PPC_FSL_BOOK3E
 	select PPC_FPU # Make it a choice ?
 	select PPC_SMP_MUXED_IPI
 	select PPC_DOORBELL
@@ -287,7 +288,7 @@ config FSL_BOOKE
 config PPC_FSL_BOOK3E
 	bool
 	select ARCH_SUPPORTS_HUGETLBFS if PHYS_64BIT || PPC64
-	select FSL_EMB_PERFMON
+	imply FSL_EMB_PERFMON
 	select PPC_SMP_MUXED_IPI
 	select PPC_DOORBELL
 	default y if FSL_BOOKE
-- 
2.34.1

[PATCH AUTOSEL 5.15 79/98] can: isotp: set default value for N_As to 50 micro seconds

[Sasha Levin]

From: Oliver Hartkopp <socketcan@hartkopp.net>

[ Upstream commit 530e0d46c61314c59ecfdb8d3bcb87edbc0f85d3 ]

The N_As value describes the time a CAN frame needs on the wire when
transmitted by the CAN controller. Even very short CAN FD frames need
arround 100 usecs (bitrate 1Mbit/s, data bitrate 8Mbit/s).

Having N_As to be zero (the former default) leads to 'no CAN frame
separation' when STmin is set to zero by the receiving node. This 'burst
mode' should not be enabled by default as it could potentially dump a high
number of CAN frames into the netdev queue from the soft hrtimer context.
This does not affect the system stability but is just not nice and
cooperative.

With this N_As/frame_txtime value the 'burst mode' is disabled by default.

As user space applications usually do not set the frame_txtime element
of struct can_isotp_options the new in-kernel default is very likely
overwritten with zero when the sockopt() CAN_ISOTP_OPTS is invoked.
To make sure that a N_As value of zero is only set intentional the
value '0' is now interpreted as 'do not change the current value'.
When a frame_txtime of zero is required for testing purposes this
CAN_ISOTP_FRAME_TXTIME_ZERO u32 value has to be set in frame_txtime.

Link: https://lore.kernel.org/all/20220309120416.83514-2-socketcan@hartkopp.net
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/uapi/linux/can/isotp.h | 28 ++++++++++++++++++++++------
 net/can/isotp.c                | 12 +++++++++++-
 2 files changed, 33 insertions(+), 7 deletions(-)

diff --git a/include/uapi/linux/can/isotp.h b/include/uapi/linux/can/isotp.h
index c55935b64ccc..590f8aea2b6d 100644
--- a/include/uapi/linux/can/isotp.h
+++ b/include/uapi/linux/can/isotp.h
@@ -137,20 +137,16 @@ struct can_isotp_ll_options {
 #define CAN_ISOTP_WAIT_TX_DONE	0x400	/* wait for tx completion */
 #define CAN_ISOTP_SF_BROADCAST	0x800	/* 1-to-N functional addressing */
 
-/* default values */
+/* protocol machine default values */
 
 #define CAN_ISOTP_DEFAULT_FLAGS		0
 #define CAN_ISOTP_DEFAULT_EXT_ADDRESS	0x00
 #define CAN_ISOTP_DEFAULT_PAD_CONTENT	0xCC /* prevent bit-stuffing */
-#define CAN_ISOTP_DEFAULT_FRAME_TXTIME	0
+#define CAN_ISOTP_DEFAULT_FRAME_TXTIME	50000 /* 50 micro seconds */
 #define CAN_ISOTP_DEFAULT_RECV_BS	0
 #define CAN_ISOTP_DEFAULT_RECV_STMIN	0x00
 #define CAN_ISOTP_DEFAULT_RECV_WFTMAX	0
 
-#define CAN_ISOTP_DEFAULT_LL_MTU	CAN_MTU
-#define CAN_ISOTP_DEFAULT_LL_TX_DL	CAN_MAX_DLEN
-#define CAN_ISOTP_DEFAULT_LL_TX_FLAGS	0
-
 /*
  * Remark on CAN_ISOTP_DEFAULT_RECV_* values:
  *
@@ -162,4 +158,24 @@ struct can_isotp_ll_options {
  * consistency and copied directly into the flow control (FC) frame.
  */
 
+/* link layer default values => make use of Classical CAN frames */
+
+#define CAN_ISOTP_DEFAULT_LL_MTU	CAN_MTU
+#define CAN_ISOTP_DEFAULT_LL_TX_DL	CAN_MAX_DLEN
+#define CAN_ISOTP_DEFAULT_LL_TX_FLAGS	0
+
+/*
+ * The CAN_ISOTP_DEFAULT_FRAME_TXTIME has become a non-zero value as
+ * it only makes sense for isotp implementation tests to run without
+ * a N_As value. As user space applications usually do not set the
+ * frame_txtime element of struct can_isotp_options the new in-kernel
+ * default is very likely overwritten with zero when the sockopt()
+ * CAN_ISOTP_OPTS is invoked.
+ * To make sure that a N_As value of zero is only set intentional the
+ * value '0' is now interpreted as 'do not change the current value'.
+ * When a frame_txtime of zero is required for testing purposes this
+ * CAN_ISOTP_FRAME_TXTIME_ZERO u32 value has to be set in frame_txtime.
+ */
+#define CAN_ISOTP_FRAME_TXTIME_ZERO	0xFFFFFFFF
+
 #endif /* !_UAPI_CAN_ISOTP_H */
diff --git a/net/can/isotp.c b/net/can/isotp.c
index d2a430b6a13b..ea8e932008a3 100644
--- a/net/can/isotp.c
+++ b/net/can/isotp.c
@@ -141,6 +141,7 @@ struct isotp_sock {
 	struct can_isotp_options opt;
 	struct can_isotp_fc_options rxfc, txfc;
 	struct can_isotp_ll_options ll;
+	u32 frame_txtime;
 	u32 force_tx_stmin;
 	u32 force_rx_stmin;
 	struct tpcon rx, tx;
@@ -360,7 +361,7 @@ static int isotp_rcv_fc(struct isotp_sock *so, struct canfd_frame *cf, int ae)
 
 		so->tx_gap = ktime_set(0, 0);
 		/* add transmission time for CAN frame N_As */
-		so->tx_gap = ktime_add_ns(so->tx_gap, so->opt.frame_txtime);
+		so->tx_gap = ktime_add_ns(so->tx_gap, so->frame_txtime);
 		/* add waiting time for consecutive frames N_Cs */
 		if (so->opt.flags & CAN_ISOTP_FORCE_TXSTMIN)
 			so->tx_gap = ktime_add_ns(so->tx_gap,
@@ -1238,6 +1239,14 @@ static int isotp_setsockopt_locked(struct socket *sock, int level, int optname,
 		/* no separate rx_ext_address is given => use ext_address */
 		if (!(so->opt.flags & CAN_ISOTP_RX_EXT_ADDR))
 			so->opt.rx_ext_address = so->opt.ext_address;
+
+		/* check for frame_txtime changes (0 => no changes) */
+		if (so->opt.frame_txtime) {
+			if (so->opt.frame_txtime == CAN_ISOTP_FRAME_TXTIME_ZERO)
+				so->frame_txtime = 0;
+			else
+				so->frame_txtime = so->opt.frame_txtime;
+		}
 		break;
 
 	case CAN_ISOTP_RECV_FC:
@@ -1439,6 +1448,7 @@ static int isotp_init(struct sock *sk)
 	so->opt.rxpad_content = CAN_ISOTP_DEFAULT_PAD_CONTENT;
 	so->opt.txpad_content = CAN_ISOTP_DEFAULT_PAD_CONTENT;
 	so->opt.frame_txtime = CAN_ISOTP_DEFAULT_FRAME_TXTIME;
+	so->frame_txtime = CAN_ISOTP_DEFAULT_FRAME_TXTIME;
 	so->rxfc.bs = CAN_ISOTP_DEFAULT_RECV_BS;
 	so->rxfc.stmin = CAN_ISOTP_DEFAULT_RECV_STMIN;
 	so->rxfc.wftmax = CAN_ISOTP_DEFAULT_RECV_WFTMAX;
-- 
2.34.1

[PATCH AUTOSEL 5.15 80/98] can: etas_es58x: es58x_fd_rx_event_msg(): initialize rx_event_msg before calling es58x_check_msg_len()

[Sasha Levin]

From: Vincent Mailhol <mailhol.vincent@wanadoo.fr>

[ Upstream commit 7a8cd7c0ee823a1cc893ab3feaa23e4b602bfb9a ]

Function es58x_fd_rx_event() invokes the es58x_check_msg_len() macro:

| 	ret = es58x_check_msg_len(es58x_dev->dev, *rx_event_msg, msg_len);

While doing so, it dereferences an uninitialized
variable: *rx_event_msg.

This is actually harmless because es58x_check_msg_len() only uses
preprocessor macros (sizeof() and __stringify()) on
*rx_event_msg. c.f. [1].

Nonetheless, this pattern is confusing so the lines are reordered to
make sure that rx_event_msg is correctly initialized.

This patch also fixes a false positive warning reported by cppcheck:

| cppcheck possible warnings: (new ones prefixed by >>, may not be real problems)
|
|    In file included from drivers/net/can/usb/etas_es58x/es58x_fd.c:
| >> drivers/net/can/usb/etas_es58x/es58x_fd.c:174:8: warning: Uninitialized variable: rx_event_msg [uninitvar]
|     ret = es58x_check_msg_len(es58x_dev->dev, *rx_event_msg, msg_len);
|           ^

[1] https://elixir.bootlin.com/linux/v5.16/source/drivers/net/can/usb/etas_es58x/es58x_core.h#L467

Link: https://lore.kernel.org/all/20220306101302.708783-1-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/can/usb/etas_es58x/es58x_fd.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/can/usb/etas_es58x/es58x_fd.c b/drivers/net/can/usb/etas_es58x/es58x_fd.c
index af042aa55f59..26bf4775e884 100644
--- a/drivers/net/can/usb/etas_es58x/es58x_fd.c
+++ b/drivers/net/can/usb/etas_es58x/es58x_fd.c
@@ -171,12 +171,11 @@ static int es58x_fd_rx_event_msg(struct net_device *netdev,
 	const struct es58x_fd_rx_event_msg *rx_event_msg;
 	int ret;
 
+	rx_event_msg = &es58x_fd_urb_cmd->rx_event_msg;
 	ret = es58x_check_msg_len(es58x_dev->dev, *rx_event_msg, msg_len);
 	if (ret)
 		return ret;
 
-	rx_event_msg = &es58x_fd_urb_cmd->rx_event_msg;
-
 	return es58x_rx_err_msg(netdev, rx_event_msg->error_code,
 				rx_event_msg->event_code,
 				get_unaligned_le64(&rx_event_msg->timestamp));
-- 
2.34.1

[PATCH AUTOSEL 5.15 82/98] net: account alternate interface name memory

[Sasha Levin]

From: Jakub Kicinski <kuba@kernel.org>

[ Upstream commit 5d26cff5bdbebdf98ba48217c078ff102536f134 ]

George reports that altnames can eat up kernel memory.
We should charge that memory appropriately.

Reported-by: George Shuklin <george.shuklin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/rtnetlink.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index 91d7a5a5a08d..a8c319dc224a 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -3637,7 +3637,7 @@ static int rtnl_alt_ifname(int cmd, struct net_device *dev, struct nlattr *attr,
 	if (err)
 		return err;
 
-	alt_ifname = nla_strdup(attr, GFP_KERNEL);
+	alt_ifname = nla_strdup(attr, GFP_KERNEL_ACCOUNT);
 	if (!alt_ifname)
 		return -ENOMEM;
 
-- 
2.34.1

[PATCH AUTOSEL 5.15 83/98] net: limit altnames to 64k total

[Sasha Levin]

From: Jakub Kicinski <kuba@kernel.org>

[ Upstream commit 155fb43b70b5fce341347a77d1af2765d1e8fbb8 ]

Property list (altname is a link "property") is wrapped
in a nlattr. nlattrs length is 16bit so practically
speaking the list of properties can't be longer than
that, otherwise user space would have to interpret
broken netlink messages.

Prevent the problem from occurring by checking the length
of the property list before adding new entries.

Reported-by: George Shuklin <george.shuklin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/rtnetlink.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index a8c319dc224a..9c0e8ccf9bc5 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -3631,12 +3631,23 @@ static int rtnl_alt_ifname(int cmd, struct net_device *dev, struct nlattr *attr,
 			   bool *changed, struct netlink_ext_ack *extack)
 {
 	char *alt_ifname;
+	size_t size;
 	int err;
 
 	err = nla_validate(attr, attr->nla_len, IFLA_MAX, ifla_policy, extack);
 	if (err)
 		return err;
 
+	if (cmd == RTM_NEWLINKPROP) {
+		size = rtnl_prop_list_size(dev);
+		size += nla_total_size(ALTIFNAMSIZ);
+		if (size >= U16_MAX) {
+			NL_SET_ERR_MSG(extack,
+				       "effective property list too long");
+			return -EINVAL;
+		}
+	}
+
 	alt_ifname = nla_strdup(attr, GFP_KERNEL_ACCOUNT);
 	if (!alt_ifname)
 		return -ENOMEM;
-- 
2.34.1

[PATCH AUTOSEL 5.15 84/98] net/mlx5e: Remove overzealous validations in netlink EEPROM query

[Sasha Levin]

From: Gal Pressman <gal@nvidia.com>

[ Upstream commit 970adfb76095fa719778d70a6b86030d2feb88dd ]

Unlike the legacy EEPROM callbacks, when using the netlink EEPROM query
(get_module_eeprom_by_page) the driver should not try to validate the
query parameters, but just perform the read requested by the userspace.

Recent discussion in the mailing list:
https://lore.kernel.org/netdev/20220120093051.70845141@kicinski-fedora-PC1C0HJN.hsd1.ca.comcast.net/

Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/mellanox/mlx5/core/port.c    | 23 -------------------
 1 file changed, 23 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/port.c b/drivers/net/ethernet/mellanox/mlx5/core/port.c
index 7b16a1188aab..fd79860de723 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/port.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/port.c
@@ -433,35 +433,12 @@ int mlx5_query_module_eeprom_by_page(struct mlx5_core_dev *dev,
 				     struct mlx5_module_eeprom_query_params *params,
 				     u8 *data)
 {
-	u8 module_id;
 	int err;
 
 	err = mlx5_query_module_num(dev, &params->module_number);
 	if (err)
 		return err;
 
-	err = mlx5_query_module_id(dev, params->module_number, &module_id);
-	if (err)
-		return err;
-
-	switch (module_id) {
-	case MLX5_MODULE_ID_SFP:
-		if (params->page > 0)
-			return -EINVAL;
-		break;
-	case MLX5_MODULE_ID_QSFP:
-	case MLX5_MODULE_ID_QSFP28:
-	case MLX5_MODULE_ID_QSFP_PLUS:
-		if (params->page > 3)
-			return -EINVAL;
-		break;
-	case MLX5_MODULE_ID_DSFP:
-		break;
-	default:
-		mlx5_core_err(dev, "Module ID not recognized: 0x%x\n", module_id);
-		return -EINVAL;
-	}
-
 	if (params->i2c_address != MLX5_I2C_ADDR_HIGH &&
 	    params->i2c_address != MLX5_I2C_ADDR_LOW) {
 		mlx5_core_err(dev, "I2C address not recognized: 0x%x\n", params->i2c_address);
-- 
2.34.1

[PATCH AUTOSEL 5.15 86/98] net: sfp: add 2500base-X quirk for Lantech SFP module

[Sasha Levin]

From: Michael Walle <michael@walle.cc>

[ Upstream commit 00eec9fe4f3b9588b4bfa8ef9dd0aae96407d5d7 ]

The Lantech 8330-262D-E module is 2500base-X capable, but it reports the
nominal bitrate as 2500MBd instead of 3125MBd. Add a quirk for the
module.

The following in an EEPROM dump of such a SFP with the serial number
redacted:

00: 03 04 07 00 00 00 01 20 40 0c 05 01 19 00 00 00    ???...? @????...
10: 1e 0f 00 00 4c 61 6e 74 65 63 68 20 20 20 20 20    ??..Lantech
20: 20 20 20 20 00 00 00 00 38 33 33 30 2d 32 36 32        ....8330-262
30: 44 2d 45 20 20 20 20 20 56 31 2e 30 03 52 00 cb    D-E     V1.0?R.?
40: 00 1a 00 00 46 43 XX XX XX XX XX XX XX XX XX XX    .?..FCXXXXXXXXXX
50: 20 20 20 20 32 32 30 32 31 34 20 20 68 b0 01 98        220214  h???
60: 45 58 54 52 45 4d 45 4c 59 20 43 4f 4d 50 41 54    EXTREMELY COMPAT
70: 49 42 4c 45 20 20 20 20 20 20 20 20 20 20 20 20    IBLE

Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220312205014.4154907-1-michael@walle.cc
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/sfp-bus.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c
index ef2c6a09eb0f..4369d6249e7b 100644
--- a/drivers/net/phy/sfp-bus.c
+++ b/drivers/net/phy/sfp-bus.c
@@ -74,6 +74,12 @@ static const struct sfp_quirk sfp_quirks[] = {
 		.vendor = "HUAWEI",
 		.part = "MA5671A",
 		.modes = sfp_quirk_2500basex,
+	}, {
+		// Lantech 8330-262D-E can operate at 2500base-X, but
+		// incorrectly report 2500MBd NRZ in their EEPROM
+		.vendor = "Lantech",
+		.part = "8330-262D-E",
+		.modes = sfp_quirk_2500basex,
 	}, {
 		.vendor = "UBNT",
 		.part = "UF-INSTANT",
-- 
2.34.1

[PATCH AUTOSEL 5.15 88/98] mt76: fix monitor mode crash with sdio driver

[Sasha Levin]

From: Deren Wu <deren.wu@mediatek.com>

[ Upstream commit 123bc712b1de0805f9d683687e17b1ec2aba0b68 ]

mt7921s driver may receive frames with fragment buffers. If there is a
CTS packet received in monitor mode, the payload is 10 bytes only and
need 6 bytes header padding after RXD buffer. However, only RXD in the
first linear buffer, if we pull buffer size RXD-size+6 bytes with
skb_pull(), that would trigger "BUG_ON(skb->len < skb->data_len)" in
__skb_pull().

To avoid the nonlinear buffer issue, enlarge the RXD size from 128 to
256 to make sure all MCU operation in linear buffer.

[   52.007562] kernel BUG at include/linux/skbuff.h:2313!
[   52.007578] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[   52.007987] pc : skb_pull+0x48/0x4c
[   52.008015] lr : mt7921_queue_rx_skb+0x494/0x890 [mt7921_common]
[   52.008361] Call trace:
[   52.008377]  skb_pull+0x48/0x4c
[   52.008400]  mt76s_net_worker+0x134/0x1b0 [mt76_sdio 35339a92c6eb7d4bbcc806a1d22f56365565135c]
[   52.008431]  __mt76_worker_fn+0xe8/0x170 [mt76 ef716597d11a77150bc07e3fdd68eeb0f9b56917]
[   52.008449]  kthread+0x148/0x3ac
[   52.008466]  ret_from_fork+0x10/0x30

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt76.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
index 4d01fd85283d..6e4d69715927 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76.h
@@ -19,7 +19,7 @@
 
 #define MT_MCU_RING_SIZE	32
 #define MT_RX_BUF_SIZE		2048
-#define MT_SKB_HEAD_LEN		128
+#define MT_SKB_HEAD_LEN		256
 
 #define MT_MAX_NON_AQL_PKT	16
 #define MT_TXQ_FREE_THR		32
-- 
2.34.1

[PATCH AUTOSEL 5.15 91/98] Bluetooth: Fix use after free in hci_send_acl

[Sasha Levin]

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

[ Upstream commit f63d24baff787e13b723d86fe036f84bdbc35045 ]

This fixes the following trace caused by receiving
HCI_EV_DISCONN_PHY_LINK_COMPLETE which does call hci_conn_del without
first checking if conn->type is in fact AMP_LINK and in case it is
do properly cleanup upper layers with hci_disconn_cfm:

 ==================================================================
    BUG: KASAN: use-after-free in hci_send_acl+0xaba/0xc50
    Read of size 8 at addr ffff88800e404818 by task bluetoothd/142

    CPU: 0 PID: 142 Comm: bluetoothd Not tainted
    5.17.0-rc5-00006-gda4022eeac1a #7
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
    rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
    Call Trace:
     <TASK>
     dump_stack_lvl+0x45/0x59
     print_address_description.constprop.0+0x1f/0x150
     kasan_report.cold+0x7f/0x11b
     hci_send_acl+0xaba/0xc50
     l2cap_do_send+0x23f/0x3d0
     l2cap_chan_send+0xc06/0x2cc0
     l2cap_sock_sendmsg+0x201/0x2b0
     sock_sendmsg+0xdc/0x110
     sock_write_iter+0x20f/0x370
     do_iter_readv_writev+0x343/0x690
     do_iter_write+0x132/0x640
     vfs_writev+0x198/0x570
     do_writev+0x202/0x280
     do_syscall_64+0x38/0x90
     entry_SYSCALL_64_after_hwframe+0x44/0xae
    RSP: 002b:00007ffce8a099b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000014
    Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3
    0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 14 00 00 00 0f 05
    <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
    RDX: 0000000000000001 RSI: 00007ffce8a099e0 RDI: 0000000000000015
    RAX: ffffffffffffffda RBX: 00007ffce8a099e0 RCX: 00007f788fc3cf77
    R10: 00007ffce8af7080 R11: 0000000000000246 R12: 000055e4ccf75580
    RBP: 0000000000000015 R08: 0000000000000002 R09: 0000000000000001
    </TASK>
    R13: 000055e4ccf754a0 R14: 000055e4ccf75cd0 R15: 000055e4ccf4a6b0

    Allocated by task 45:
        kasan_save_stack+0x1e/0x40
        __kasan_kmalloc+0x81/0xa0
        hci_chan_create+0x9a/0x2f0
        l2cap_conn_add.part.0+0x1a/0xdc0
        l2cap_connect_cfm+0x236/0x1000
        le_conn_complete_evt+0x15a7/0x1db0
        hci_le_conn_complete_evt+0x226/0x2c0
        hci_le_meta_evt+0x247/0x450
        hci_event_packet+0x61b/0xe90
        hci_rx_work+0x4d5/0xc50
        process_one_work+0x8fb/0x15a0
        worker_thread+0x576/0x1240
        kthread+0x29d/0x340
        ret_from_fork+0x1f/0x30

    Freed by task 45:
        kasan_save_stack+0x1e/0x40
        kasan_set_track+0x21/0x30
        kasan_set_free_info+0x20/0x30
        __kasan_slab_free+0xfb/0x130
        kfree+0xac/0x350
        hci_conn_cleanup+0x101/0x6a0
        hci_conn_del+0x27e/0x6c0
        hci_disconn_phylink_complete_evt+0xe0/0x120
        hci_event_packet+0x812/0xe90
        hci_rx_work+0x4d5/0xc50
        process_one_work+0x8fb/0x15a0
        worker_thread+0x576/0x1240
        kthread+0x29d/0x340
        ret_from_fork+0x1f/0x30

    The buggy address belongs to the object at ffff88800c0f0500
    The buggy address is located 24 bytes inside of
    which belongs to the cache kmalloc-128 of size 128
    The buggy address belongs to the page:
    128-byte region [ffff88800c0f0500, ffff88800c0f0580)
    flags: 0x100000000000200(slab|node=0|zone=1)
    page:00000000fe45cd86 refcount:1 mapcount:0
    mapping:0000000000000000 index:0x0 pfn:0xc0f0
    raw: 0000000000000000 0000000080100010 00000001ffffffff
    0000000000000000
    raw: 0100000000000200 ffffea00003a2c80 dead000000000004
    ffff8880078418c0
    page dumped because: kasan: bad access detected
    ffff88800c0f0400: 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc
    Memory state around the buggy address:
    >ffff88800c0f0500: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
    ffff88800c0f0480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
    ffff88800c0f0580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
                                ^
    ==================================================================
    ffff88800c0f0600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Reported-by: Sönke Huster <soenke.huster@eknoes.de>
Tested-by: Sönke Huster <soenke.huster@eknoes.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_event.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 868a22df3285..e984a8b4b914 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -5153,8 +5153,9 @@ static void hci_disconn_phylink_complete_evt(struct hci_dev *hdev,
 	hci_dev_lock(hdev);
 
 	hcon = hci_conn_hash_lookup_handle(hdev, ev->phy_handle);
-	if (hcon) {
+	if (hcon && hcon->type == AMP_LINK) {
 		hcon->state = BT_CLOSED;
+		hci_disconn_cfm(hcon, ev->reason);
 		hci_conn_del(hcon);
 	}
 
-- 
2.34.1

[PATCH AUTOSEL 5.15 92/98] netfilter: conntrack: revisit gc autotuning

[Sasha Levin]

From: Florian Westphal <fw@strlen.de>

[ Upstream commit 2cfadb761d3d0219412fd8150faea60c7e863833 ]

as of commit 4608fdfc07e1
("netfilter: conntrack: collect all entries in one cycle")
conntrack gc was changed to run every 2 minutes.

On systems where conntrack hash table is set to large value, most evictions
happen from gc worker rather than the packet path due to hash table
distribution.

This causes netlink event overflows when events are collected.

This change collects average expiry of scanned entries and
reschedules to the average remaining value, within 1 to 60 second interval.

To avoid event overflows, reschedule after each bucket and add a
limit for both run time and number of evictions per run.

If more entries have to be evicted, reschedule and restart 1 jiffy
into the future.

Reported-by: Karel Rericha <karel@maxtel.cz>
Cc: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Cc: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_conntrack_core.c | 85 ++++++++++++++++++++++++-------
 1 file changed, 68 insertions(+), 17 deletions(-)

diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index 7f7997460764..4045169ff47a 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -66,6 +66,8 @@ EXPORT_SYMBOL_GPL(nf_conntrack_hash);
 struct conntrack_gc_work {
 	struct delayed_work	dwork;
 	u32			next_bucket;
+	u32			avg_timeout;
+	u32			start_time;
 	bool			exiting;
 	bool			early_drop;
 };
@@ -77,8 +79,19 @@ static __read_mostly bool nf_conntrack_locks_all;
 /* serialize hash resizes and nf_ct_iterate_cleanup */
 static DEFINE_MUTEX(nf_conntrack_mutex);
 
-#define GC_SCAN_INTERVAL	(120u * HZ)
+#define GC_SCAN_INTERVAL_MAX	(60ul * HZ)
+#define GC_SCAN_INTERVAL_MIN	(1ul * HZ)
+
+/* clamp timeouts to this value (TCP unacked) */
+#define GC_SCAN_INTERVAL_CLAMP	(300ul * HZ)
+
+/* large initial bias so that we don't scan often just because we have
+ * three entries with a 1s timeout.
+ */
+#define GC_SCAN_INTERVAL_INIT	INT_MAX
+
 #define GC_SCAN_MAX_DURATION	msecs_to_jiffies(10)
+#define GC_SCAN_EXPIRED_MAX	(64000u / HZ)
 
 #define MIN_CHAINLEN	8u
 #define MAX_CHAINLEN	(32u - MIN_CHAINLEN)
@@ -1420,16 +1433,28 @@ static bool gc_worker_can_early_drop(const struct nf_conn *ct)
 
 static void gc_worker(struct work_struct *work)
 {
-	unsigned long end_time = jiffies + GC_SCAN_MAX_DURATION;
 	unsigned int i, hashsz, nf_conntrack_max95 = 0;
-	unsigned long next_run = GC_SCAN_INTERVAL;
+	u32 end_time, start_time = nfct_time_stamp;
 	struct conntrack_gc_work *gc_work;
+	unsigned int expired_count = 0;
+	unsigned long next_run;
+	s32 delta_time;
+
 	gc_work = container_of(work, struct conntrack_gc_work, dwork.work);
 
 	i = gc_work->next_bucket;
 	if (gc_work->early_drop)
 		nf_conntrack_max95 = nf_conntrack_max / 100u * 95u;
 
+	if (i == 0) {
+		gc_work->avg_timeout = GC_SCAN_INTERVAL_INIT;
+		gc_work->start_time = start_time;
+	}
+
+	next_run = gc_work->avg_timeout;
+
+	end_time = start_time + GC_SCAN_MAX_DURATION;
+
 	do {
 		struct nf_conntrack_tuple_hash *h;
 		struct hlist_nulls_head *ct_hash;
@@ -1446,6 +1471,7 @@ static void gc_worker(struct work_struct *work)
 
 		hlist_nulls_for_each_entry_rcu(h, n, &ct_hash[i], hnnode) {
 			struct nf_conntrack_net *cnet;
+			unsigned long expires;
 			struct net *net;
 
 			tmp = nf_ct_tuplehash_to_ctrack(h);
@@ -1455,11 +1481,29 @@ static void gc_worker(struct work_struct *work)
 				continue;
 			}
 
+			if (expired_count > GC_SCAN_EXPIRED_MAX) {
+				rcu_read_unlock();
+
+				gc_work->next_bucket = i;
+				gc_work->avg_timeout = next_run;
+
+				delta_time = nfct_time_stamp - gc_work->start_time;
+
+				/* re-sched immediately if total cycle time is exceeded */
+				next_run = delta_time < (s32)GC_SCAN_INTERVAL_MAX;
+				goto early_exit;
+			}
+
 			if (nf_ct_is_expired(tmp)) {
 				nf_ct_gc_expired(tmp);
+				expired_count++;
 				continue;
 			}
 
+			expires = clamp(nf_ct_expires(tmp), GC_SCAN_INTERVAL_MIN, GC_SCAN_INTERVAL_CLAMP);
+			next_run += expires;
+			next_run /= 2u;
+
 			if (nf_conntrack_max95 == 0 || gc_worker_skip_ct(tmp))
 				continue;
 
@@ -1477,8 +1521,10 @@ static void gc_worker(struct work_struct *work)
 				continue;
 			}
 
-			if (gc_worker_can_early_drop(tmp))
+			if (gc_worker_can_early_drop(tmp)) {
 				nf_ct_kill(tmp);
+				expired_count++;
+			}
 
 			nf_ct_put(tmp);
 		}
@@ -1491,33 +1537,38 @@ static void gc_worker(struct work_struct *work)
 		cond_resched();
 		i++;
 
-		if (time_after(jiffies, end_time) && i < hashsz) {
+		delta_time = nfct_time_stamp - end_time;
+		if (delta_time > 0 && i < hashsz) {
+			gc_work->avg_timeout = next_run;
 			gc_work->next_bucket = i;
 			next_run = 0;
-			break;
+			goto early_exit;
 		}
 	} while (i < hashsz);
 
+	gc_work->next_bucket = 0;
+
+	next_run = clamp(next_run, GC_SCAN_INTERVAL_MIN, GC_SCAN_INTERVAL_MAX);
+
+	delta_time = max_t(s32, nfct_time_stamp - gc_work->start_time, 1);
+	if (next_run > (unsigned long)delta_time)
+		next_run -= delta_time;
+	else
+		next_run = 1;
+
+early_exit:
 	if (gc_work->exiting)
 		return;
 
-	/*
-	 * Eviction will normally happen from the packet path, and not
-	 * from this gc worker.
-	 *
-	 * This worker is only here to reap expired entries when system went
-	 * idle after a busy period.
-	 */
-	if (next_run) {
+	if (next_run)
 		gc_work->early_drop = false;
-		gc_work->next_bucket = 0;
-	}
+
 	queue_delayed_work(system_power_efficient_wq, &gc_work->dwork, next_run);
 }
 
 static void conntrack_gc_work_init(struct conntrack_gc_work *gc_work)
 {
-	INIT_DEFERRABLE_WORK(&gc_work->dwork, gc_worker);
+	INIT_DELAYED_WORK(&gc_work->dwork, gc_worker);
 	gc_work->exiting = false;
 }
 
-- 
2.34.1

[PATCH AUTOSEL 5.15 93/98] netlabel: fix out-of-bounds memory accesses

[Sasha Levin]

From: Wang Yufen <wangyufen@huawei.com>

[ Upstream commit f22881de730ebd472e15bcc2c0d1d46e36a87b9c ]

In calipso_map_cat_ntoh(), in the for loop, if the return value of
netlbl_bitmap_walk() is equal to (net_clen_bits - 1), when
netlbl_bitmap_walk() is called next time, out-of-bounds memory accesses
of bitmap[byte_offset] occurs.

The bug was found during fuzzing. The following is the fuzzing report
 BUG: KASAN: slab-out-of-bounds in netlbl_bitmap_walk+0x3c/0xd0
 Read of size 1 at addr ffffff8107bf6f70 by task err_OH/252

 CPU: 7 PID: 252 Comm: err_OH Not tainted 5.17.0-rc7+ #17
 Hardware name: linux,dummy-virt (DT)
 Call trace:
  dump_backtrace+0x21c/0x230
  show_stack+0x1c/0x60
  dump_stack_lvl+0x64/0x7c
  print_address_description.constprop.0+0x70/0x2d0
  __kasan_report+0x158/0x16c
  kasan_report+0x74/0x120
  __asan_load1+0x80/0xa0
  netlbl_bitmap_walk+0x3c/0xd0
  calipso_opt_getattr+0x1a8/0x230
  calipso_sock_getattr+0x218/0x340
  calipso_sock_getattr+0x44/0x60
  netlbl_sock_getattr+0x44/0x80
  selinux_netlbl_socket_setsockopt+0x138/0x170
  selinux_socket_setsockopt+0x4c/0x60
  security_socket_setsockopt+0x4c/0x90
  __sys_setsockopt+0xbc/0x2b0
  __arm64_sys_setsockopt+0x6c/0x84
  invoke_syscall+0x64/0x190
  el0_svc_common.constprop.0+0x88/0x200
  do_el0_svc+0x88/0xa0
  el0_svc+0x128/0x1b0
  el0t_64_sync_handler+0x9c/0x120
  el0t_64_sync+0x16c/0x170

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netlabel/netlabel_kapi.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/netlabel/netlabel_kapi.c b/net/netlabel/netlabel_kapi.c
index beb0e573266d..54c083003947 100644
--- a/net/netlabel/netlabel_kapi.c
+++ b/net/netlabel/netlabel_kapi.c
@@ -885,6 +885,8 @@ int netlbl_bitmap_walk(const unsigned char *bitmap, u32 bitmap_len,
 	unsigned char bitmask;
 	unsigned char byte;
 
+	if (offset >= bitmap_len)
+		return -1;
 	byte_offset = offset / 8;
 	byte = bitmap[byte_offset];
 	bit_spot = offset;
-- 
2.34.1