[PATCH v6 02/10] net: ieee802154: Fill the list of MLME return codes

[Miquel Raynal <miquel.raynal@bootlin.com>]

There are more codes than already listed, let's be a bit more
exhaustive. This will allow to drop device drivers local definitions of
these codes.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 include/linux/ieee802154.h | 67 +++++++++++++++++++++++++++++++++++++-
 1 file changed, 66 insertions(+), 1 deletion(-)

diff --git a/include/linux/ieee802154.h b/include/linux/ieee802154.h
index 01d945c8b2e1..f1f9412b6ac6 100644
--- a/include/linux/ieee802154.h
+++ b/include/linux/ieee802154.h
@@ -134,7 +134,35 @@ enum {
 	 * a successful transmission.
 	 */
 	IEEE802154_SUCCESS = 0x0,
-
+	/* The requested operation failed. */
+	IEEE802154_MAC_ERROR = 0x1,
+	/* The requested operation has been cancelled. */
+	IEEE802154_CANCELLED = 0x2,
+	/*
+	 * Device is ready to poll the coordinator for data in a non beacon
+	 * enabled PAN.
+	 */
+	IEEE802154_READY_FOR_POLL = 0x3,
+	/* Wrong frame counter. */
+	IEEE802154_COUNTER_ERROR = 0xdb,
+	/*
+	 * The frame does not conforms to the incoming key usage policy checking
+	 * procedure.
+	 */
+	IEEE802154_IMPROPER_KEY_TYPE = 0xdc,
+	/*
+	 * The frame does not conforms to the incoming security level usage
+	 * policy checking procedure.
+	 */
+	IEEE802154_IMPROPER_SECURITY_LEVEL = 0xdd,
+	/* Secured frame received with an empty Frame Version field. */
+	IEEE802154_UNSUPPORTED_LEGACY = 0xde,
+	/*
+	 * A secured frame is received or must be sent but security is not
+	 * enabled in the device. Or, the Auxiliary Security Header has security
+	 * level of zero in it.
+	 */
+	IEEE802154_UNSUPPORTED_SECURITY = 0xdf,
 	/* The beacon was lost following a synchronization request. */
 	IEEE802154_BEACON_LOST = 0xe0,
 	/*
@@ -204,11 +232,48 @@ enum {
 	 * that is not supported.
 	 */
 	IEEE802154_UNSUPPORTED_ATTRIBUTE = 0xf4,
+	/* Missing source or destination address or address mode. */
+	IEEE802154_INVALID_ADDRESS = 0xf5,
+	/*
+	 * MLME asked to turn the receiver on, but the on time duration is too
+	 * big compared to the macBeaconOrder.
+	 */
+	IEEE802154_ON_TIME_TOO_LONG = 0xf6,
+	/*
+	 * MLME asaked to turn the receiver on, but the request was delayed for
+	 * too long before getting processed.
+	 */
+	IEEE802154_PAST_TIME = 0xf7,
+	/*
+	 * The StartTime parameter is nonzero, and the MLME is not currently
+	 * tracking the beacon of the coordinator through which it is
+	 * associated.
+	 */
+	IEEE802154_TRACKING_OFF = 0xf8,
+	/*
+	 * The index inside the hierarchical values in PIBAttribute is out of
+	 * range.
+	 */
+	IEEE802154_INVALID_INDEX = 0xf9,
+	/*
+	 * The number of PAN descriptors discovered during a scan has been
+	 * reached.
+	 */
+	IEEE802154_LIMIT_REACHED = 0xfa,
+	/*
+	 * The PIBAttribute parameter specifies an attribute that is a read-only
+	 * attribute.
+	 */
+	IEEE802154_READ_ONLY = 0xfb,
 	/*
 	 * A request to perform a scan operation failed because the MLME was
 	 * in the process of performing a previously initiated scan operation.
 	 */
 	IEEE802154_SCAN_IN_PROGRESS = 0xfc,
+	/* The outgoing superframe overlaps the incoming superframe. */
+	IEEE802154_SUPERFRAME_OVERLAP = 0xfd,
+	/* Any other error situation. */
+	IEEE802154_SYSTEM_ERROR = 0xff,
 };
 
 /* frame control handling */
-- 
2.27.0