From: Jakub Kicinski <kuba@kernel.org>
To: Josua Mayer <josua@solid-run.com>
Cc: netdev@vger.kernel.org, alvaro.karsz@solid-run.com,
Michael Hennerich <michael.hennerich@analog.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Paolo Abeni <pabeni@redhat.com>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Alexandru Ardelean <alexandru.ardelean@analog.com>
Subject: Re: [PATCH v4 1/3] dt-bindings: net: adin: document phy clock output properties
Date: Tue, 10 May 2022 13:39:28 -0700 [thread overview]
Message-ID: <20220510133928.6a0710dd@kernel.org> (raw)
In-Reply-To: <20220509143635.26233-2-josua@solid-run.com>
On Mon, 9 May 2022 17:36:33 +0300 Josua Mayer wrote:
> + adi,phy-output-clock:
> + description: Select clock output on GP_CLK pin. Three clocks are available:
> + A 25MHz reference, a free-running 125MHz and a recovered 125MHz.
> + The phy can also automatically switch between the reference and the
> + respective 125MHz clocks based on its internal state.
> + $ref: /schemas/types.yaml#/definitions/string
> + enum:
> + - 25mhz-reference
> + - 125mhz-free-running
> + - 125mhz-recovered
> + - adaptive-free-running
> + - adaptive-recovered
I'm still not convinced that exposing the free running vs recovered
distinction from the start is a good idea. Intuitively it'd seem that
it's better to use the recovered clock to feed the wire side of the MAC,
this patch set uses the free running. So I'd personally strip the last
part off and add it later if needed.
But I won't fuss, if we get an ack from one of the PHY maintainers -
I'll merge as is.
Andrew?
next prev parent reply other threads:[~2022-05-10 20:39 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-10 10:46 [PATCH 0/3] adin: add support for 125MHz clk-out Josua Mayer
2022-04-10 10:46 ` [PATCH 1/3] dt: adin: document clk-out property Josua Mayer
2022-04-10 14:21 ` Krzysztof Kozlowski
2022-04-10 18:41 ` Josua Mayer
2022-04-10 19:01 ` Krzysztof Kozlowski
2022-04-11 7:42 ` Josua Mayer
2022-04-11 20:07 ` Jakub Kicinski
2022-04-11 20:59 ` Andrew Lunn
2022-04-11 21:33 ` Jakub Kicinski
2022-04-12 0:29 ` Andrew Lunn
2022-04-10 10:46 ` [PATCH 2/3] net: phy: adin: add support for 125MHz clk-out Josua Mayer
2022-04-10 10:46 ` [PATCH 3/3] ARM: dts: imx6qdl-sr-som: update phy configuration for som revision 1.9 Josua Mayer
2022-04-19 10:27 ` [PATCH v2 0/3] adin: add support for clock output Josua Mayer
2022-04-19 10:27 ` [PATCH v2 1/3] dt-bindings: net: adin: document phy clock output properties Josua Mayer
2022-04-21 12:24 ` Andrew Lunn
2022-04-19 10:27 ` [PATCH v2 2/3] net: phy: adin: add support for clock output Josua Mayer
2022-04-21 6:45 ` kernel test robot
2022-04-27 7:06 ` Josua Mayer
2022-04-19 10:27 ` [PATCH v2 3/3] ARM: dts: imx6qdl-sr-som: update phy configuration for som revision 1.9 Josua Mayer
2022-04-21 12:27 ` Andrew Lunn
2022-04-21 13:03 ` Russell King (Oracle)
2022-04-21 13:30 ` Andrew Lunn
2022-04-21 14:20 ` Russell King (Oracle)
2022-04-27 7:15 ` Josua Mayer
2022-05-09 16:01 ` Russell King (Oracle)
2022-04-28 8:28 ` [PATCH v3 0/3] adin: add support for clock output Josua Mayer
2022-04-28 8:28 ` [PATCH v3 1/3] dt-bindings: net: adin: document phy clock output properties Josua Mayer
2022-05-05 15:52 ` Josua Mayer
2022-05-05 20:24 ` Krzysztof Kozlowski
2022-05-08 9:57 ` Josua Mayer
2022-05-09 7:21 ` Krzysztof Kozlowski
2022-05-09 12:36 ` Josua Mayer
2022-04-28 8:28 ` [PATCH v3 2/3] net: phy: adin: add support for clock output Josua Mayer
2022-04-28 12:21 ` Andrew Lunn
2022-04-28 12:52 ` Josua Mayer
2022-04-28 23:34 ` Andrew Lunn
2022-04-28 8:28 ` [PATCH v3 3/3] ARM: dts: imx6qdl-sr-som: update phy configuration for som revision 1.9 Josua Mayer
2022-05-05 1:42 ` Shawn Guo
2022-05-09 14:36 ` [PATCH v4 0/3] adin: add support for clock output Josua Mayer
2022-05-09 14:36 ` [PATCH v4 1/3] dt-bindings: net: adin: document phy clock output properties Josua Mayer
2022-05-10 10:22 ` Krzysztof Kozlowski
2022-05-10 20:39 ` Jakub Kicinski [this message]
2022-05-11 12:58 ` [PATCH v4 1/3] dt-bindings: net: adin: document phy clock Michael Walle
2022-05-11 16:11 ` Jakub Kicinski
2022-05-11 17:10 ` Michael Walle
2022-05-11 19:42 ` Jakub Kicinski
2022-05-12 21:20 ` Michael Walle
2022-05-12 22:44 ` Jakub Kicinski
2022-05-15 7:16 ` Josua Mayer
2022-05-16 17:43 ` Jakub Kicinski
2022-05-16 19:48 ` Josua Mayer
2022-05-16 22:40 ` Jakub Kicinski
2022-05-17 8:50 ` Josua Mayer
2022-05-09 14:36 ` [PATCH v4 2/3] net: phy: adin: add support for clock output Josua Mayer
2022-05-09 14:36 ` [PATCH v4 3/3] ARM: dts: imx6qdl-sr-som: update phy configuration for som revision 1.9 Josua Mayer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220510133928.6a0710dd@kernel.org \
--to=kuba@kernel.org \
--cc=alexandru.ardelean@analog.com \
--cc=alvaro.karsz@solid-run.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=josua@solid-run.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=michael.hennerich@analog.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).