From: Steffen Klassert <steffen.klassert@secunet.com>
To: David Miller <davem@davemloft.net>, Jakub Kicinski <kuba@kernel.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>,
Steffen Klassert <steffen.klassert@secunet.com>,
<netdev@vger.kernel.org>
Subject: [PATCH 5/8] ixgbe: propagate XFRM offload state direction instead of flags
Date: Fri, 13 May 2022 17:12:15 +0200 [thread overview]
Message-ID: <20220513151218.4010119-6-steffen.klassert@secunet.com> (raw)
In-Reply-To: <20220513151218.4010119-1-steffen.klassert@secunet.com>
From: Leon Romanovsky <leonro@nvidia.com>
Convert the ixgbe driver to rely on XFRM offload state direction instead
of flags bits that were not checked at all.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c | 9 ++++-----
drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.h | 2 +-
drivers/net/ethernet/intel/ixgbevf/ipsec.c | 6 +++---
drivers/net/ethernet/intel/ixgbevf/ipsec.h | 2 +-
4 files changed, 9 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
index 69d11ff7677d..774de63dd93a 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
@@ -585,7 +585,7 @@ static int ixgbe_ipsec_add_sa(struct xfrm_state *xs)
return -EINVAL;
}
- if (xs->xso.flags & XFRM_OFFLOAD_INBOUND) {
+ if (xs->xso.dir == XFRM_DEV_OFFLOAD_IN) {
struct rx_sa rsa;
if (xs->calg) {
@@ -757,7 +757,7 @@ static void ixgbe_ipsec_del_sa(struct xfrm_state *xs)
u32 zerobuf[4] = {0, 0, 0, 0};
u16 sa_idx;
- if (xs->xso.flags & XFRM_OFFLOAD_INBOUND) {
+ if (xs->xso.dir == XFRM_DEV_OFFLOAD_IN) {
struct rx_sa *rsa;
u8 ipi;
@@ -903,8 +903,7 @@ int ixgbe_ipsec_vf_add_sa(struct ixgbe_adapter *adapter, u32 *msgbuf, u32 vf)
/* Tx IPsec offload doesn't seem to work on this
* device, so block these requests for now.
*/
- sam->flags = sam->flags & ~XFRM_OFFLOAD_IPV6;
- if (sam->flags != XFRM_OFFLOAD_INBOUND) {
+ if (sam->dir != XFRM_DEV_OFFLOAD_IN) {
err = -EOPNOTSUPP;
goto err_out;
}
@@ -915,7 +914,7 @@ int ixgbe_ipsec_vf_add_sa(struct ixgbe_adapter *adapter, u32 *msgbuf, u32 vf)
goto err_out;
}
- xs->xso.flags = sam->flags;
+ xs->xso.dir = sam->dir;
xs->id.spi = sam->spi;
xs->id.proto = sam->proto;
xs->props.family = sam->family;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.h
index d2b64ff8eb4e..809ab51a7842 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.h
@@ -74,7 +74,7 @@ struct ixgbe_ipsec {
struct sa_mbx_msg {
__be32 spi;
- u8 flags;
+ u8 dir;
u8 proto;
u16 family;
__be32 addr[4];
diff --git a/drivers/net/ethernet/intel/ixgbevf/ipsec.c b/drivers/net/ethernet/intel/ixgbevf/ipsec.c
index e763cee0695e..9984ebc62d78 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ipsec.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ipsec.c
@@ -25,7 +25,7 @@ static int ixgbevf_ipsec_set_pf_sa(struct ixgbevf_adapter *adapter,
/* send the important bits to the PF */
sam = (struct sa_mbx_msg *)(&msgbuf[1]);
- sam->flags = xs->xso.flags;
+ sam->dir = xs->xso.dir;
sam->spi = xs->id.spi;
sam->proto = xs->id.proto;
sam->family = xs->props.family;
@@ -280,7 +280,7 @@ static int ixgbevf_ipsec_add_sa(struct xfrm_state *xs)
return -EINVAL;
}
- if (xs->xso.flags & XFRM_OFFLOAD_INBOUND) {
+ if (xs->xso.dir == XFRM_DEV_OFFLOAD_IN) {
struct rx_sa rsa;
if (xs->calg) {
@@ -394,7 +394,7 @@ static void ixgbevf_ipsec_del_sa(struct xfrm_state *xs)
adapter = netdev_priv(dev);
ipsec = adapter->ipsec;
- if (xs->xso.flags & XFRM_OFFLOAD_INBOUND) {
+ if (xs->xso.dir == XFRM_DEV_OFFLOAD_IN) {
sa_idx = xs->xso.offload_handle - IXGBE_IPSEC_BASE_RX_INDEX;
if (!ipsec->rx_tbl[sa_idx].used) {
diff --git a/drivers/net/ethernet/intel/ixgbevf/ipsec.h b/drivers/net/ethernet/intel/ixgbevf/ipsec.h
index 3740725041c3..d22990165353 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ipsec.h
+++ b/drivers/net/ethernet/intel/ixgbevf/ipsec.h
@@ -57,7 +57,7 @@ struct ixgbevf_ipsec {
struct sa_mbx_msg {
__be32 spi;
- u8 flags;
+ u8 dir;
u8 proto;
u16 family;
__be32 addr[4];
--
2.25.1
next prev parent reply other threads:[~2022-05-13 15:12 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-13 15:12 [PATCH 0/8] pull request (net-next): ipsec-next 2022-05-13 Steffen Klassert
2022-05-13 15:12 ` [PATCH 1/8] xfrm: free not used XFRM_ESP_NO_TRAILER flag Steffen Klassert
2022-05-13 20:20 ` patchwork-bot+netdevbpf
2022-05-13 15:12 ` [PATCH 2/8] xfrm: delete not used number of external headers Steffen Klassert
2022-05-13 15:12 ` [PATCH 3/8] xfrm: rename xfrm_state_offload struct to allow reuse Steffen Klassert
2022-05-13 15:12 ` [PATCH 4/8] xfrm: store and rely on direction to construct offload flags Steffen Klassert
2022-05-13 15:12 ` Steffen Klassert [this message]
2022-05-13 15:12 ` [PATCH 6/8] netdevsim: rely on XFRM state direction instead of flags Steffen Klassert
2022-05-13 15:12 ` [PATCH 7/8] net/mlx5e: Use " Steffen Klassert
2022-05-13 15:12 ` [PATCH 8/8] xfrm: drop not needed flags variable in XFRM offload struct Steffen Klassert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220513151218.4010119-6-steffen.klassert@secunet.com \
--to=steffen.klassert@secunet.com \
--cc=davem@davemloft.net \
--cc=herbert@gondor.apana.org.au \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).