[PATCH AUTOSEL 5.4 2/5] net: af_key: check encryption module availability consistency

[PATCH AUTOSEL 5.4 2/5] net: af_key: check encryption module availability consistency

[Sasha Levin]

From: Thomas Bartschies <thomas.bartschies@cvk.de>

[ Upstream commit 015c44d7bff3f44d569716117becd570c179ca32 ]

Since the recent introduction supporting the SM3 and SM4 hash algos for IPsec, the kernel
produces invalid pfkey acquire messages, when these encryption modules are disabled. This
happens because the availability of the algos wasn't checked in all necessary functions.
This patch adds these checks.

Signed-off-by: Thomas Bartschies <thomas.bartschies@cvk.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/key/af_key.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/net/key/af_key.c b/net/key/af_key.c
index 2ac9560020f9..d8bceb8cf756 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -2902,7 +2902,7 @@ static int count_ah_combs(const struct xfrm_tmpl *t)
 			break;
 		if (!aalg->pfkey_supported)
 			continue;
-		if (aalg_tmpl_set(t, aalg))
+		if (aalg_tmpl_set(t, aalg) && aalg->available)
 			sz += sizeof(struct sadb_comb);
 	}
 	return sz + sizeof(struct sadb_prop);
@@ -2920,7 +2920,7 @@ static int count_esp_combs(const struct xfrm_tmpl *t)
 		if (!ealg->pfkey_supported)
 			continue;
 
-		if (!(ealg_tmpl_set(t, ealg)))
+		if (!(ealg_tmpl_set(t, ealg) && ealg->available))
 			continue;
 
 		for (k = 1; ; k++) {
@@ -2931,7 +2931,7 @@ static int count_esp_combs(const struct xfrm_tmpl *t)
 			if (!aalg->pfkey_supported)
 				continue;
 
-			if (aalg_tmpl_set(t, aalg))
+			if (aalg_tmpl_set(t, aalg) && aalg->available)
 				sz += sizeof(struct sadb_comb);
 		}
 	}
-- 
2.35.1

[PATCH AUTOSEL 5.4 3/5] net: ftgmac100: Disable hardware checksum on AST2600

[Sasha Levin]

From: Joel Stanley <joel@jms.id.au>

[ Upstream commit 6fd45e79e8b93b8d22fb8fe22c32fbad7e9190bd ]

The AST2600 when using the i210 NIC over NC-SI has been observed to
produce incorrect checksum results with specific MTU values. This was
first observed when sending data across a long distance set of networks.

On a local network, the following test was performed using a 1MB file of
random data.

On the receiver run this script:

 #!/bin/bash
 while [ 1 ]; do
        # Zero the stats
        nstat -r  > /dev/null
        nc -l 9899 > test-file
        # Check for checksum errors
        TcpInCsumErrors=$(nstat | grep TcpInCsumErrors)
        if [ -z "$TcpInCsumErrors" ]; then
                echo No TcpInCsumErrors
        else
                echo TcpInCsumErrors = $TcpInCsumErrors
        fi
 done

On an AST2600 system:

 # nc <IP of  receiver host> 9899 < test-file

The test was repeated with various MTU values:

 # ip link set mtu 1410 dev eth0

The observed results:

 1500 - good
 1434 - bad
 1400 - good
 1410 - bad
 1420 - good

The test was repeated after disabling tx checksumming:

 # ethtool -K eth0 tx-checksumming off

And all MTU values tested resulted in transfers without error.

An issue with the driver cannot be ruled out, however there has been no
bug discovered so far.

David has done the work to take the original bug report of slow data
transfer between long distance connections and triaged it down to this
test case.

The vendor suspects this this is a hardware issue when using NC-SI. The
fixes line refers to the patch that introduced AST2600 support.

Reported-by: David Wilder <wilder@us.ibm.com>
Reviewed-by: Dylan Hung <dylan_hung@aspeedtech.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/faraday/ftgmac100.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index 2c06cdcd3e75..d7478d332820 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -1880,6 +1880,11 @@ static int ftgmac100_probe(struct platform_device *pdev)
 	/* AST2400  doesn't have working HW checksum generation */
 	if (np && (of_device_is_compatible(np, "aspeed,ast2400-mac")))
 		netdev->hw_features &= ~NETIF_F_HW_CSUM;
+
+	/* AST2600 tx checksum with NCSI is broken */
+	if (priv->use_ncsi && of_device_is_compatible(np, "aspeed,ast2600-mac"))
+		netdev->hw_features &= ~NETIF_F_HW_CSUM;
+
 	if (np && of_get_property(np, "no-hw-checksum", NULL))
 		netdev->hw_features &= ~(NETIF_F_HW_CSUM | NETIF_F_RXCSUM);
 	netdev->features |= netdev->hw_features;
-- 
2.35.1