From: "Viorel Suman (OSS)" <viorel.suman@oss.nxp.com>
To: Andrew Lunn <andrew@lunn.ch>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Luo Jie <luoj@codeaurora.org>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: linux-imx@nxp.com, Viorel Suman <viorel.suman@nxp.com>
Subject: [PATCH] net: phy: at803x: disable WOL at probe
Date: Wed, 25 May 2022 13:36:57 +0300 [thread overview]
Message-ID: <20220525103657.22384-1-viorel.suman@oss.nxp.com> (raw)
From: Viorel Suman <viorel.suman@nxp.com>
Before 7beecaf7d507b ("net: phy: at803x: improve the WOL feature") patch
"at803x_get_wol" implementation used AT803X_INTR_ENABLE_WOL value to set
WAKE_MAGIC flag, and now AT803X_WOL_EN value is used for the same purpose.
The problem here is that the value of these two bits is different after
hardware reset: AT803X_INTR_ENABLE_WOL=0 after hardware reset, but
AT803X_WOL_EN=1. So now, if called right after boot, "at803x_get_wol" will
set WAKE_MAGIC flag, even if WOL function is not enabled via
"at803x_set_wol" call. The patch disables WOL function on probe using
"at803x_set_wol" call thus the behavior is consistent.
Fixes: 7beecaf7d507b ("net: phy: at803x: improve the WOL feature")
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
---
drivers/net/phy/at803x.c | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 73926006d319..6277d1b1d814 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -443,10 +443,10 @@ static int at803x_set_wol(struct phy_device *phydev,
AT803X_LOC_MAC_ADDR_0_15_OFFSET,
};
- if (!ndev)
- return -ENODEV;
-
if (wol->wolopts & WAKE_MAGIC) {
+ if (!ndev)
+ return -ENODEV;
+
mac = (const u8 *) ndev->dev_addr;
if (!is_valid_ether_addr(mac))
@@ -857,6 +857,9 @@ static int at803x_probe(struct phy_device *phydev)
if (phydev->drv->phy_id == ATH8031_PHY_ID) {
int ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
int mode_cfg;
+ struct ethtool_wolinfo wol = {
+ .wolopts = 0,
+ };
if (ccr < 0)
goto err;
@@ -872,6 +875,13 @@ static int at803x_probe(struct phy_device *phydev)
priv->is_fiber = true;
break;
}
+
+ /* Disable WOL by default */
+ ret = at803x_set_wol(phydev, &wol);
+ if (ret < 0) {
+ phydev_err(phydev, "failed to disable WOL on probe: %d\n", ret);
+ return ret;
+ }
}
return 0;
--
2.35.3
next reply other threads:[~2022-05-25 10:37 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-25 10:36 Viorel Suman (OSS) [this message]
2022-05-27 4:00 ` [PATCH] net: phy: at803x: disable WOL at probe Jakub Kicinski
2022-05-27 9:50 ` Viorel Suman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220525103657.22384-1-viorel.suman@oss.nxp.com \
--to=viorel.suman@oss.nxp.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=luoj@codeaurora.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=viorel.suman@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).