From: Arun Ramadoss <arun.ramadoss@microchip.com>
To: <linux-kernel@vger.kernel.org>, <netdev@vger.kernel.org>
Cc: Woojung Huh <woojung.huh@microchip.com>,
<UNGLinuxDriver@microchip.com>, Andrew Lunn <andrew@lunn.ch>,
Vivien Didelot <vivien.didelot@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
"Russell King" <linux@armlinux.org.uk>
Subject: [Patch net-next 04/11] net: dsa: microchip: ksz9477: use ksz_read_phy16 & ksz_write_phy16
Date: Fri, 17 Jun 2022 14:12:48 +0530 [thread overview]
Message-ID: <20220617084255.19376-5-arun.ramadoss@microchip.com> (raw)
In-Reply-To: <20220617084255.19376-1-arun.ramadoss@microchip.com>
ksz8795 and ksz9477 implementation on phy read/write hooks are
different. This patch modifies the ksz9477 implementation same as
ksz8795 by updating the ksz9477_dev_ops structure.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
---
drivers/net/dsa/microchip/ksz9477.c | 23 ++++++++++-------------
1 file changed, 10 insertions(+), 13 deletions(-)
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index ab3fbb8e15a1..4fb96e53487e 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -276,9 +276,8 @@ static void ksz9477_port_init_cnt(struct ksz_device *dev, int port)
mutex_unlock(&mib->cnt_mutex);
}
-static int ksz9477_phy_read16(struct dsa_switch *ds, int addr, int reg)
+static void ksz9477_r_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 *data)
{
- struct ksz_device *dev = ds->priv;
u16 val = 0xffff;
/* No real PHY after this. Simulate the PHY.
@@ -323,24 +322,20 @@ static int ksz9477_phy_read16(struct dsa_switch *ds, int addr, int reg)
ksz_pread16(dev, addr, 0x100 + (reg << 1), &val);
}
- return val;
+ *data = val;
}
-static int ksz9477_phy_write16(struct dsa_switch *ds, int addr, int reg,
- u16 val)
+static void ksz9477_w_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 val)
{
- struct ksz_device *dev = ds->priv;
-
/* No real PHY after this. */
if (addr >= dev->phy_port_cnt)
- return 0;
+ return;
/* No gigabit support. Do not write to this register. */
if (!(dev->features & GBIT_SUPPORT) && reg == MII_CTRL1000)
- return 0;
- ksz_pwrite16(dev, addr, 0x100 + (reg << 1), val);
+ return;
- return 0;
+ ksz_pwrite16(dev, addr, 0x100 + (reg << 1), val);
}
static void ksz9477_cfg_port_member(struct ksz_device *dev, int port,
@@ -1316,8 +1311,8 @@ static int ksz9477_setup(struct dsa_switch *ds)
static const struct dsa_switch_ops ksz9477_switch_ops = {
.get_tag_protocol = ksz_get_tag_protocol,
.setup = ksz9477_setup,
- .phy_read = ksz9477_phy_read16,
- .phy_write = ksz9477_phy_write16,
+ .phy_read = ksz_phy_read16,
+ .phy_write = ksz_phy_write16,
.phylink_mac_link_down = ksz_mac_link_down,
.phylink_get_caps = ksz9477_get_caps,
.port_enable = ksz_enable_port,
@@ -1405,6 +1400,8 @@ static const struct ksz_dev_ops ksz9477_dev_ops = {
.cfg_port_member = ksz9477_cfg_port_member,
.flush_dyn_mac_table = ksz9477_flush_dyn_mac_table,
.port_setup = ksz9477_port_setup,
+ .r_phy = ksz9477_r_phy,
+ .w_phy = ksz9477_w_phy,
.r_mib_cnt = ksz9477_r_mib_cnt,
.r_mib_pkt = ksz9477_r_mib_pkt,
.r_mib_stat64 = ksz_r_mib_stats64,
--
2.36.1
next prev parent reply other threads:[~2022-06-17 8:44 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-17 8:42 [Patch net-next 00/11] net: dsa: microchip: common spi probe for the ksz series switches - part 1 Arun Ramadoss
2022-06-17 8:42 ` [Patch net-next 01/11] net: dsa: microchip: ksz9477: cleanup the ksz9477_switch_detect Arun Ramadoss
2022-06-17 8:42 ` [Patch net-next 02/11] net: dsa: microchip: move switch chip_id detection to ksz_common Arun Ramadoss
2022-06-17 8:42 ` [Patch net-next 03/11] net: dsa: microchip: move tag_protocol " Arun Ramadoss
2022-06-17 8:42 ` Arun Ramadoss [this message]
2022-06-17 8:42 ` [Patch net-next 05/11] net: dsa: microchip: move vlan functionality " Arun Ramadoss
2022-06-17 8:42 ` [Patch net-next 06/11] net: dsa: microchip: move the port mirror " Arun Ramadoss
2022-06-17 22:03 ` Florian Fainelli
2022-06-17 8:42 ` [Patch net-next 07/11] net: dsa: microchip: get P_STP_CTRL in ksz_port_stp_state by ksz_dev_ops Arun Ramadoss
2022-06-17 8:42 ` [Patch net-next 08/11] net: dsa: microchip: update the ksz_phylink_get_caps Arun Ramadoss
2022-06-17 8:42 ` [Patch net-next 09/11] net: dsa: microchip: update the ksz_port_mdb_add/del Arun Ramadoss
2022-06-17 8:42 ` [Patch net-next 10/11] net: dsa: microchip: update fdb add/del/dump in ksz_common Arun Ramadoss
2022-06-17 8:42 ` [Patch net-next 11/11] net: dsa: microchip: move get_phy_flags & mtu to ksz_common Arun Ramadoss
2022-06-21 11:18 ` [Patch net-next 00/11] net: dsa: microchip: common spi probe for the ksz series switches - part 1 Vladimir Oltean
2022-06-21 13:50 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220617084255.19376-5-arun.ramadoss@microchip.com \
--to=arun.ramadoss@microchip.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=vivien.didelot@gmail.com \
--cc=woojung.huh@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox