Update the man page for newly added selftests commands. Examples: devlink dev selftests run pci/0000:03:00.0 test flash devlink dev selftests show pci/0000:03:00.0 Signed-off-by: Vikas Gupta Reviewed-by: Michael Chan Reviewed-by: Andy Gospodarek --- man/man8/devlink-dev.8 | 46 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+) diff --git a/man/man8/devlink-dev.8 b/man/man8/devlink-dev.8 index 6906e509..057551a8 100644 --- a/man/man8/devlink-dev.8 +++ b/man/man8/devlink-dev.8 @@ -85,6 +85,16 @@ devlink-dev \- devlink device configuration .I ID ] +.ti -8 +.B devlink dev selftests show +.I DEV + +.ti -8 +.B devlink dev selftests run +.I DEV +.B test +.I TESTNAME + .SH "DESCRIPTION" .SS devlink dev show - display devlink device attributes @@ -249,6 +259,32 @@ should match the component names from .B "devlink dev info" and may be driver-dependent. +.SS devlink dev selftests show - shows supported selftests on devlink device. + +.PP +.I "DEV" +- specifies the devlink device. + +.SS devlink dev selftests run - runs selftests on devlink device. + +.PP +.I "DEV" +- specifies the devlink device to execute selftests. + +.B test +{ +.BI " TESTNAME " +| +.B " all " +} +- The value of +.I TESTNAME +should match the test names from +.B "devlink dev selftests show". +OR Pass option +.B "all" +to execute all the selftests on the devlink device. + .SH "EXAMPLES" .PP devlink dev show @@ -296,6 +332,16 @@ Flashing 100% .br Flashing done .RE +.PP +devlink dev selftests show pci/0000:01:00.0 +.RS 4 +Shows the supported selftests by the devlink device. +.RE +.PP +devlink dev selftests run pci/0000:01:00.0 test flash +.RS 4 +Perform a flash test on the devlink device. +.RE .SH SEE ALSO .BR devlink (8), -- 2.31.1