* [PATCH AUTOSEL 5.18 32/41] Revert "can: xilinx_can: Limit CANFD brp to 2"
[not found] <20220714042221.281187-1-sashal@kernel.org>
@ 2022-07-14 4:22 ` Sasha Levin
2022-07-14 4:22 ` [PATCH AUTOSEL 5.18 38/41] wireguard: selftests: set fake real time in init Sasha Levin
` (2 subsequent siblings)
3 siblings, 0 replies; 7+ messages in thread
From: Sasha Levin @ 2022-07-14 4:22 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Srinivas Neeli, Marc Kleine-Budde, Sasha Levin, appana.durga.rao,
wg, davem, edumazet, kuba, pabeni, michal.simek, linux-can,
netdev, linux-arm-kernel
From: Srinivas Neeli <srinivas.neeli@xilinx.com>
[ Upstream commit c6da4590fe819dfe28a4f8037a8dc1e056542fb4 ]
This reverts commit 05ca14fdb6fe65614e0652d03e44b02748d25af7.
On early silicon engineering samples observed bit shrinking issue when
we use brp as 1. Hence updated brp_min as 2. As in production silicon
this issue is fixed, so reverting the patch.
Link: https://lore.kernel.org/all/20220609082433.1191060-2-srinivas.neeli@xilinx.com
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/can/xilinx_can.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index 43f0c6a064ba..75b4db4d050b 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -259,7 +259,7 @@ static const struct can_bittiming_const xcan_bittiming_const_canfd2 = {
.tseg2_min = 1,
.tseg2_max = 128,
.sjw_max = 128,
- .brp_min = 2,
+ .brp_min = 1,
.brp_max = 256,
.brp_inc = 1,
};
@@ -272,7 +272,7 @@ static const struct can_bittiming_const xcan_data_bittiming_const_canfd2 = {
.tseg2_min = 1,
.tseg2_max = 16,
.sjw_max = 16,
- .brp_min = 2,
+ .brp_min = 1,
.brp_max = 256,
.brp_inc = 1,
};
--
2.35.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH AUTOSEL 5.18 38/41] wireguard: selftests: set fake real time in init
[not found] <20220714042221.281187-1-sashal@kernel.org>
2022-07-14 4:22 ` [PATCH AUTOSEL 5.18 32/41] Revert "can: xilinx_can: Limit CANFD brp to 2" Sasha Levin
@ 2022-07-14 4:22 ` Sasha Levin
2022-07-14 4:22 ` [PATCH AUTOSEL 5.18 39/41] wireguard: selftests: use virt machine on m68k Sasha Levin
2022-07-14 4:22 ` [PATCH AUTOSEL 5.18 40/41] wireguard: selftests: always call kernel makefile Sasha Levin
3 siblings, 0 replies; 7+ messages in thread
From: Sasha Levin @ 2022-07-14 4:22 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Jason A. Donenfeld, Jakub Kicinski, Sasha Levin, shuah, wireguard,
netdev, linux-kselftest
From: "Jason A. Donenfeld" <Jason@zx2c4.com>
[ Upstream commit 829be057dbc1e71383b8d7de8edb31dcf07b4aa0 ]
Not all platforms have an RTC, and rather than trying to force one into
each, it's much easier to just set a fixed time. This is necessary
because WireGuard's latest handshakes parameter is returned in wallclock
time, and if the system time isn't set, and the system is really fast,
then this returns 0, which trips the test.
Turning this on requires setting CONFIG_COMPAT_32BIT_TIME=y, as musl
doesn't support settimeofday without it.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../testing/selftests/wireguard/qemu/arch/arm.config | 1 +
.../selftests/wireguard/qemu/arch/armeb.config | 1 +
.../testing/selftests/wireguard/qemu/arch/i686.config | 1 +
.../testing/selftests/wireguard/qemu/arch/m68k.config | 1 +
.../testing/selftests/wireguard/qemu/arch/mips.config | 1 +
.../selftests/wireguard/qemu/arch/mipsel.config | 1 +
.../selftests/wireguard/qemu/arch/powerpc.config | 1 +
tools/testing/selftests/wireguard/qemu/init.c | 11 +++++++++++
8 files changed, 18 insertions(+)
diff --git a/tools/testing/selftests/wireguard/qemu/arch/arm.config b/tools/testing/selftests/wireguard/qemu/arch/arm.config
index fc7959bef9c2..0579c66be83e 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/arm.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/arm.config
@@ -7,6 +7,7 @@ CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_MMIO=y
CONFIG_VIRTIO_CONSOLE=y
+CONFIG_COMPAT_32BIT_TIME=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyAMA0 wg.success=vport0p1 panic_on_warn=1"
CONFIG_FRAME_WARN=1024
diff --git a/tools/testing/selftests/wireguard/qemu/arch/armeb.config b/tools/testing/selftests/wireguard/qemu/arch/armeb.config
index f3066be81c19..2a3307bbe534 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/armeb.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/armeb.config
@@ -7,6 +7,7 @@ CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_MMIO=y
CONFIG_VIRTIO_CONSOLE=y
+CONFIG_COMPAT_32BIT_TIME=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyAMA0 wg.success=vport0p1 panic_on_warn=1"
CONFIG_CPU_BIG_ENDIAN=y
diff --git a/tools/testing/selftests/wireguard/qemu/arch/i686.config b/tools/testing/selftests/wireguard/qemu/arch/i686.config
index 6d90892a85a2..cd864b9be6fb 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/i686.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/i686.config
@@ -1,6 +1,7 @@
CONFIG_ACPI=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_COMPAT_32BIT_TIME=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1"
CONFIG_FRAME_WARN=1024
diff --git a/tools/testing/selftests/wireguard/qemu/arch/m68k.config b/tools/testing/selftests/wireguard/qemu/arch/m68k.config
index 82c925e49beb..9639bfe06074 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/m68k.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/m68k.config
@@ -5,5 +5,6 @@ CONFIG_MAC=y
CONFIG_SERIAL_PMACZILOG=y
CONFIG_SERIAL_PMACZILOG_TTYS=y
CONFIG_SERIAL_PMACZILOG_CONSOLE=y
+CONFIG_COMPAT_32BIT_TIME=y
CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1"
CONFIG_FRAME_WARN=1024
diff --git a/tools/testing/selftests/wireguard/qemu/arch/mips.config b/tools/testing/selftests/wireguard/qemu/arch/mips.config
index d7ec63c17b30..2a84402353ab 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/mips.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/mips.config
@@ -6,6 +6,7 @@ CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_SYSCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_COMPAT_32BIT_TIME=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1"
CONFIG_FRAME_WARN=1024
diff --git a/tools/testing/selftests/wireguard/qemu/arch/mipsel.config b/tools/testing/selftests/wireguard/qemu/arch/mipsel.config
index 18a498293737..56146a101e7e 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/mipsel.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/mipsel.config
@@ -7,6 +7,7 @@ CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_SYSCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_COMPAT_32BIT_TIME=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1"
CONFIG_FRAME_WARN=1024
diff --git a/tools/testing/selftests/wireguard/qemu/arch/powerpc.config b/tools/testing/selftests/wireguard/qemu/arch/powerpc.config
index 5e04882e8e35..174a9ffe2a36 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/powerpc.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/powerpc.config
@@ -4,6 +4,7 @@ CONFIG_PPC_85xx=y
CONFIG_PHYS_64BIT=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_COMPAT_32BIT_TIME=y
CONFIG_MATH_EMULATION=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1"
diff --git a/tools/testing/selftests/wireguard/qemu/init.c b/tools/testing/selftests/wireguard/qemu/init.c
index 2a0f48fac925..542c34b00eb0 100644
--- a/tools/testing/selftests/wireguard/qemu/init.c
+++ b/tools/testing/selftests/wireguard/qemu/init.c
@@ -11,6 +11,7 @@
#include <stdlib.h>
#include <stdbool.h>
#include <fcntl.h>
+#include <time.h>
#include <sys/wait.h>
#include <sys/mount.h>
#include <sys/stat.h>
@@ -67,6 +68,15 @@ static void seed_rng(void)
close(fd);
}
+static void set_time(void)
+{
+ if (time(NULL))
+ return;
+ pretty_message("[+] Setting fake time...");
+ if (stime(&(time_t){1433512680}) < 0)
+ panic("settimeofday()");
+}
+
static void mount_filesystems(void)
{
pretty_message("[+] Mounting filesystems...");
@@ -256,6 +266,7 @@ int main(int argc, char *argv[])
print_banner();
mount_filesystems();
seed_rng();
+ set_time();
kmod_selftests();
enable_logging();
clear_leaks();
--
2.35.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH AUTOSEL 5.18 39/41] wireguard: selftests: use virt machine on m68k
[not found] <20220714042221.281187-1-sashal@kernel.org>
2022-07-14 4:22 ` [PATCH AUTOSEL 5.18 32/41] Revert "can: xilinx_can: Limit CANFD brp to 2" Sasha Levin
2022-07-14 4:22 ` [PATCH AUTOSEL 5.18 38/41] wireguard: selftests: set fake real time in init Sasha Levin
@ 2022-07-14 4:22 ` Sasha Levin
2022-07-14 7:08 ` Geert Uytterhoeven
2022-07-14 4:22 ` [PATCH AUTOSEL 5.18 40/41] wireguard: selftests: always call kernel makefile Sasha Levin
3 siblings, 1 reply; 7+ messages in thread
From: Sasha Levin @ 2022-07-14 4:22 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Jason A. Donenfeld, Jakub Kicinski, Sasha Levin, shuah, wireguard,
netdev, linux-kselftest
From: "Jason A. Donenfeld" <Jason@zx2c4.com>
[ Upstream commit 1f2f341a62639c7066ee4c76b7d9ebe867e0a1d5 ]
This should be a bit more stable hopefully.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/wireguard/qemu/Makefile | 5 +++--
tools/testing/selftests/wireguard/qemu/arch/m68k.config | 9 +++------
2 files changed, 6 insertions(+), 8 deletions(-)
diff --git a/tools/testing/selftests/wireguard/qemu/Makefile b/tools/testing/selftests/wireguard/qemu/Makefile
index bca07b93eeb0..e8a82e495d2e 100644
--- a/tools/testing/selftests/wireguard/qemu/Makefile
+++ b/tools/testing/selftests/wireguard/qemu/Makefile
@@ -210,10 +210,11 @@ QEMU_ARCH := m68k
KERNEL_ARCH := m68k
KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
KERNEL_CMDLINE := $(shell sed -n 's/CONFIG_CMDLINE=\(.*\)/\1/p' arch/m68k.config)
+QEMU_VPORT_RESULT := virtio-serial-device
ifeq ($(HOST_ARCH),$(ARCH))
-QEMU_MACHINE := -cpu host,accel=kvm -machine q800 -append $(KERNEL_CMDLINE)
+QEMU_MACHINE := -cpu host,accel=kvm -machine virt -append $(KERNEL_CMDLINE)
else
-QEMU_MACHINE := -machine q800 -smp 1 -append $(KERNEL_CMDLINE)
+QEMU_MACHINE := -machine virt -smp 1 -append $(KERNEL_CMDLINE)
endif
else ifeq ($(ARCH),riscv64)
CHOST := riscv64-linux-musl
diff --git a/tools/testing/selftests/wireguard/qemu/arch/m68k.config b/tools/testing/selftests/wireguard/qemu/arch/m68k.config
index 9639bfe06074..39c48cba56b7 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/m68k.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/m68k.config
@@ -1,10 +1,7 @@
CONFIG_MMU=y
+CONFIG_VIRT=y
CONFIG_M68KCLASSIC=y
-CONFIG_M68040=y
-CONFIG_MAC=y
-CONFIG_SERIAL_PMACZILOG=y
-CONFIG_SERIAL_PMACZILOG_TTYS=y
-CONFIG_SERIAL_PMACZILOG_CONSOLE=y
+CONFIG_VIRTIO_CONSOLE=y
CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1"
+CONFIG_CMDLINE="console=ttyGF0 wg.success=vport0p1 panic_on_warn=1"
CONFIG_FRAME_WARN=1024
--
2.35.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH AUTOSEL 5.18 39/41] wireguard: selftests: use virt machine on m68k
2022-07-14 4:22 ` [PATCH AUTOSEL 5.18 39/41] wireguard: selftests: use virt machine on m68k Sasha Levin
@ 2022-07-14 7:08 ` Geert Uytterhoeven
2022-07-17 23:01 ` Sasha Levin
0 siblings, 1 reply; 7+ messages in thread
From: Geert Uytterhoeven @ 2022-07-14 7:08 UTC (permalink / raw)
To: Sasha Levin
Cc: Linux Kernel Mailing List, stable, Jason A. Donenfeld,
Jakub Kicinski, Shuah Khan, wireguard, netdev,
open list:KERNEL SELFTEST FRAMEWORK
Hi Sasha,
On Thu, Jul 14, 2022 at 6:29 AM Sasha Levin <sashal@kernel.org> wrote:
> From: "Jason A. Donenfeld" <Jason@zx2c4.com>
>
> [ Upstream commit 1f2f341a62639c7066ee4c76b7d9ebe867e0a1d5 ]
>
> This should be a bit more stable hopefully.
>
> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
Thanks for your patch!
> --- a/tools/testing/selftests/wireguard/qemu/arch/m68k.config
> +++ b/tools/testing/selftests/wireguard/qemu/arch/m68k.config
> @@ -1,10 +1,7 @@
> CONFIG_MMU=y
> +CONFIG_VIRT=y
The m68k virt machine was introduced in v5.19-rc1, so this patch
must not be backported to v5.18 and earlier.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [PATCH AUTOSEL 5.18 39/41] wireguard: selftests: use virt machine on m68k
2022-07-14 7:08 ` Geert Uytterhoeven
@ 2022-07-17 23:01 ` Sasha Levin
2022-07-18 1:34 ` Sasha Levin
0 siblings, 1 reply; 7+ messages in thread
From: Sasha Levin @ 2022-07-17 23:01 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Linux Kernel Mailing List, stable, Jason A. Donenfeld,
Jakub Kicinski, Shuah Khan, wireguard, netdev,
open list:KERNEL SELFTEST FRAMEWORK
On Thu, Jul 14, 2022 at 09:08:49AM +0200, Geert Uytterhoeven wrote:
>Hi Sasha,
>
>On Thu, Jul 14, 2022 at 6:29 AM Sasha Levin <sashal@kernel.org> wrote:
>> From: "Jason A. Donenfeld" <Jason@zx2c4.com>
>>
>> [ Upstream commit 1f2f341a62639c7066ee4c76b7d9ebe867e0a1d5 ]
>>
>> This should be a bit more stable hopefully.
>>
>> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
>> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>
>Thanks for your patch!
>
>> --- a/tools/testing/selftests/wireguard/qemu/arch/m68k.config
>> +++ b/tools/testing/selftests/wireguard/qemu/arch/m68k.config
>> @@ -1,10 +1,7 @@
>> CONFIG_MMU=y
>> +CONFIG_VIRT=y
>
>The m68k virt machine was introduced in v5.19-rc1, so this patch
>must not be backported to v5.18 and earlier.
I'll drop it, thanks!
--
Thanks,
Sasha
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH AUTOSEL 5.18 39/41] wireguard: selftests: use virt machine on m68k
2022-07-17 23:01 ` Sasha Levin
@ 2022-07-18 1:34 ` Sasha Levin
0 siblings, 0 replies; 7+ messages in thread
From: Sasha Levin @ 2022-07-18 1:34 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Linux Kernel Mailing List, stable, Jason A. Donenfeld,
Jakub Kicinski, Shuah Khan, wireguard, netdev,
open list:KERNEL SELFTEST FRAMEWORK
On Sun, Jul 17, 2022 at 07:01:21PM -0400, Sasha Levin wrote:
>On Thu, Jul 14, 2022 at 09:08:49AM +0200, Geert Uytterhoeven wrote:
>>Hi Sasha,
>>
>>On Thu, Jul 14, 2022 at 6:29 AM Sasha Levin <sashal@kernel.org> wrote:
>>>From: "Jason A. Donenfeld" <Jason@zx2c4.com>
>>>
>>>[ Upstream commit 1f2f341a62639c7066ee4c76b7d9ebe867e0a1d5 ]
>>>
>>>This should be a bit more stable hopefully.
>>>
>>>Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
>>>Signed-off-by: Jakub Kicinski <kuba@kernel.org>
>>>Signed-off-by: Sasha Levin <sashal@kernel.org>
>>
>>Thanks for your patch!
>>
>>>--- a/tools/testing/selftests/wireguard/qemu/arch/m68k.config
>>>+++ b/tools/testing/selftests/wireguard/qemu/arch/m68k.config
>>>@@ -1,10 +1,7 @@
>>> CONFIG_MMU=y
>>>+CONFIG_VIRT=y
>>
>>The m68k virt machine was introduced in v5.19-rc1, so this patch
>>must not be backported to v5.18 and earlier.
>
>I'll drop it, thanks!
I've clicked the wrong button and still queued it by mistake, now really
removed :)
--
Thanks,
Sasha
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH AUTOSEL 5.18 40/41] wireguard: selftests: always call kernel makefile
[not found] <20220714042221.281187-1-sashal@kernel.org>
` (2 preceding siblings ...)
2022-07-14 4:22 ` [PATCH AUTOSEL 5.18 39/41] wireguard: selftests: use virt machine on m68k Sasha Levin
@ 2022-07-14 4:22 ` Sasha Levin
3 siblings, 0 replies; 7+ messages in thread
From: Sasha Levin @ 2022-07-14 4:22 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Jason A. Donenfeld, Jakub Kicinski, Sasha Levin, shuah, wireguard,
netdev, linux-kselftest
From: "Jason A. Donenfeld" <Jason@zx2c4.com>
[ Upstream commit 1a087eec257154e26a81a7a0a15380d7a2431765 ]
These selftests are used for much more extensive changes than just the
wireguard source files. So always call the kernel's build file, which
will do something or nothing after checking the whole tree, per usual.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/wireguard/qemu/Makefile | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/tools/testing/selftests/wireguard/qemu/Makefile b/tools/testing/selftests/wireguard/qemu/Makefile
index e8a82e495d2e..fcc3f668b807 100644
--- a/tools/testing/selftests/wireguard/qemu/Makefile
+++ b/tools/testing/selftests/wireguard/qemu/Makefile
@@ -19,8 +19,6 @@ endif
MIRROR := https://download.wireguard.com/qemu-test/distfiles/
KERNEL_BUILD_PATH := $(BUILD_PATH)/kernel$(if $(findstring yes,$(DEBUG_KERNEL)),-debug)
-rwildcard=$(foreach d,$(wildcard $1*),$(call rwildcard,$d/,$2) $(filter $(subst *,%,$2),$d))
-WIREGUARD_SOURCES := $(call rwildcard,$(KERNEL_PATH)/drivers/net/wireguard/,*)
default: qemu
@@ -325,8 +323,9 @@ $(KERNEL_BUILD_PATH)/.config: $(TOOLCHAIN_PATH)/.installed kernel.config arch/$(
cd $(KERNEL_BUILD_PATH) && ARCH=$(KERNEL_ARCH) $(KERNEL_PATH)/scripts/kconfig/merge_config.sh -n $(KERNEL_BUILD_PATH)/.config $(KERNEL_BUILD_PATH)/minimal.config
$(if $(findstring yes,$(DEBUG_KERNEL)),cp debug.config $(KERNEL_BUILD_PATH) && cd $(KERNEL_BUILD_PATH) && ARCH=$(KERNEL_ARCH) $(KERNEL_PATH)/scripts/kconfig/merge_config.sh -n $(KERNEL_BUILD_PATH)/.config debug.config,)
-$(KERNEL_BZIMAGE): $(TOOLCHAIN_PATH)/.installed $(KERNEL_BUILD_PATH)/.config $(BUILD_PATH)/init-cpio-spec.txt $(IPERF_PATH)/src/iperf3 $(IPUTILS_PATH)/ping $(BASH_PATH)/bash $(IPROUTE2_PATH)/misc/ss $(IPROUTE2_PATH)/ip/ip $(IPTABLES_PATH)/iptables/xtables-legacy-multi $(NMAP_PATH)/ncat/ncat $(WIREGUARD_TOOLS_PATH)/src/wg $(BUILD_PATH)/init ../netns.sh $(WIREGUARD_SOURCES)
+$(KERNEL_BZIMAGE): $(TOOLCHAIN_PATH)/.installed $(KERNEL_BUILD_PATH)/.config $(BUILD_PATH)/init-cpio-spec.txt $(IPERF_PATH)/src/iperf3 $(IPUTILS_PATH)/ping $(BASH_PATH)/bash $(IPROUTE2_PATH)/misc/ss $(IPROUTE2_PATH)/ip/ip $(IPTABLES_PATH)/iptables/xtables-legacy-multi $(NMAP_PATH)/ncat/ncat $(WIREGUARD_TOOLS_PATH)/src/wg $(BUILD_PATH)/init
$(MAKE) -C $(KERNEL_PATH) O=$(KERNEL_BUILD_PATH) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(CROSS_COMPILE)
+.PHONY: $(KERNEL_BZIMAGE)
$(TOOLCHAIN_PATH)/$(CHOST)/include/linux/.installed: | $(KERNEL_BUILD_PATH)/.config $(TOOLCHAIN_PATH)/.installed
rm -rf $(TOOLCHAIN_PATH)/$(CHOST)/include/linux
--
2.35.1
^ permalink raw reply related [flat|nested] 7+ messages in thread