netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vladimir Oltean <olteanv@gmail.com>
To: Sergei Antonov <saproj@gmail.com>
Cc: netdev@vger.kernel.org, Florian Fainelli <f.fainelli@gmail.com>
Subject: Re: [PATCH] net: dsa: mv88e6060: report max mtu 1536
Date: Wed, 10 Aug 2022 13:08:18 +0300	[thread overview]
Message-ID: <20220810100818.greurtz6csgnfggv@skbuf> (raw)
In-Reply-To: <20220810082745.1466895-1-saproj@gmail.com>

Hi Sergei,

On Wed, Aug 10, 2022 at 11:27:45AM +0300, Sergei Antonov wrote:
> This driver sets the MaxFrameSize bit to 1 during setup,
> see GLOBAL_CONTROL_MAX_FRAME_1536 in mv88e6060_setup_global().
> Thus MTU is always 1536.
> Introduce mv88e6060_port_max_mtu() to report it back to system.
> 
> Signed-off-by: Sergei Antonov <saproj@gmail.com>
> CC: Vladimir Oltean <olteanv@gmail.com>
> CC: Florian Fainelli <f.fainelli@gmail.com>
> ---
>  drivers/net/dsa/mv88e6060.c | 7 ++++++-
>  drivers/net/dsa/mv88e6060.h | 1 +
>  2 files changed, 7 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c
> index a4c6eb9a52d0..c53734379b96 100644
> --- a/drivers/net/dsa/mv88e6060.c
> +++ b/drivers/net/dsa/mv88e6060.c
> @@ -160,7 +160,6 @@ static int mv88e6060_setup_addr(struct mv88e6060_priv *priv)
>  	u16 val;
>  
>  	eth_random_addr(addr);
> -

Extraneous change.

>  	val = addr[0] << 8 | addr[1];
>  
>  	/* The multicast bit is always transmitted as a zero, so the switch uses
> @@ -212,6 +211,11 @@ static int mv88e6060_setup(struct dsa_switch *ds)
>  	return 0;
>  }
>  
> +static int mv88e6060_port_max_mtu(struct dsa_switch *ds, int port)
> +{
> +	return MV88E6060_MAX_MTU;
> +}

Does this solve any problem? It's ok for the hardware MTU to be higher
than advertised. The problem is when the hardware doesn't accept what
the stack thinks it should.

> +
>  static int mv88e6060_port_to_phy_addr(int port)
>  {
>  	if (port >= 0 && port < MV88E6060_PORTS)
> @@ -247,6 +251,7 @@ mv88e6060_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
>  static const struct dsa_switch_ops mv88e6060_switch_ops = {
>  	.get_tag_protocol = mv88e6060_get_tag_protocol,
>  	.setup		= mv88e6060_setup,
> +	.port_max_mtu	= mv88e6060_port_max_mtu,
>  	.phy_read	= mv88e6060_phy_read,
>  	.phy_write	= mv88e6060_phy_write,
>  };
> diff --git a/drivers/net/dsa/mv88e6060.h b/drivers/net/dsa/mv88e6060.h
> index 6c13c2421b64..382fe462fb2d 100644
> --- a/drivers/net/dsa/mv88e6060.h
> +++ b/drivers/net/dsa/mv88e6060.h
> @@ -11,6 +11,7 @@
>  #define __MV88E6060_H
>  
>  #define MV88E6060_PORTS	6
> +#define MV88E6060_MAX_MTU	1536
>  
>  #define REG_PORT(p)		(0x8 + (p))
>  #define PORT_STATUS		0x00
> -- 
> 2.32.0
> 

You're the first person to submit a patch on mv88e6060 that I see.
Is there a board with this switch available somewhere? Does the driver
still work?

  reply	other threads:[~2022-08-10 10:08 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-10  8:27 [PATCH] net: dsa: mv88e6060: report max mtu 1536 Sergei Antonov
2022-08-10 10:08 ` Vladimir Oltean [this message]
2022-08-10 12:00   ` Sergei Antonov
2022-08-10 13:35     ` Vladimir Oltean
2022-08-10 15:56       ` Sergei Antonov
2022-08-10 19:38         ` Vladimir Oltean
2022-08-11  8:23           ` Sergei Antonov
2022-08-11 14:12             ` Andrew Lunn
2022-08-17 17:09               ` Sergei Antonov
2022-08-16 20:42             ` Vladimir Oltean

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220810100818.greurtz6csgnfggv@skbuf \
    --to=olteanv@gmail.com \
    --cc=f.fainelli@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=saproj@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).