From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Biju Das <biju.das.jz@bp.renesas.com>,
Marc Kleine-Budde <mkl@pengutronix.de>,
Sasha Levin <sashal@kernel.org>,
wg@grandegger.com, davem@davemloft.net, edumazet@google.com,
kuba@kernel.org, pabeni@redhat.com, stefan.maetje@esd.eu,
mailhol.vincent@wanadoo.fr, socketcan@hartkopp.net,
linux-can@vger.kernel.org, netdev@vger.kernel.org
Subject: [PATCH AUTOSEL 5.19 079/105] can: sja1000: Add Quirk for RZ/N1 SJA1000 CAN controller
Date: Thu, 11 Aug 2022 11:28:03 -0400 [thread overview]
Message-ID: <20220811152851.1520029-79-sashal@kernel.org> (raw)
In-Reply-To: <20220811152851.1520029-1-sashal@kernel.org>
From: Biju Das <biju.das.jz@bp.renesas.com>
[ Upstream commit 2d99bfbf3386962692dcccd73931cb0db07a1a43 ]
As per Chapter 6.5.16 of the RZ/N1 Peripheral Manual, The SJA1000
CAN controller does not support Clock Divider Register compared to
the reference Philips SJA1000 device.
This patch adds a device quirk to handle this difference.
Link: https://lore.kernel.org/all/20220710115248.190280-4-biju.das.jz@bp.renesas.com
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/can/sja1000/sja1000.c | 8 +++++---
drivers/net/can/sja1000/sja1000.h | 3 ++-
2 files changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index 2e7638f98cf1..d9da471f1bb9 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -183,8 +183,9 @@ static void chipset_init(struct net_device *dev)
{
struct sja1000_priv *priv = netdev_priv(dev);
- /* set clock divider and output control register */
- priv->write_reg(priv, SJA1000_CDR, priv->cdr | CDR_PELICAN);
+ if (!(priv->flags & SJA1000_QUIRK_NO_CDR_REG))
+ /* set clock divider and output control register */
+ priv->write_reg(priv, SJA1000_CDR, priv->cdr | CDR_PELICAN);
/* set acceptance filter (accept all) */
priv->write_reg(priv, SJA1000_ACCC0, 0x00);
@@ -209,7 +210,8 @@ static void sja1000_start(struct net_device *dev)
set_reset_mode(dev);
/* Initialize chip if uninitialized at this stage */
- if (!(priv->read_reg(priv, SJA1000_CDR) & CDR_PELICAN))
+ if (!(priv->flags & SJA1000_QUIRK_NO_CDR_REG ||
+ priv->read_reg(priv, SJA1000_CDR) & CDR_PELICAN))
chipset_init(dev);
/* Clear error counters and error code capture */
diff --git a/drivers/net/can/sja1000/sja1000.h b/drivers/net/can/sja1000/sja1000.h
index 9d46398f8154..7f736f1df547 100644
--- a/drivers/net/can/sja1000/sja1000.h
+++ b/drivers/net/can/sja1000/sja1000.h
@@ -145,7 +145,8 @@
/*
* Flags for sja1000priv.flags
*/
-#define SJA1000_CUSTOM_IRQ_HANDLER 0x1
+#define SJA1000_CUSTOM_IRQ_HANDLER BIT(0)
+#define SJA1000_QUIRK_NO_CDR_REG BIT(1)
/*
* SJA1000 private data structure
--
2.35.1
next prev parent reply other threads:[~2022-08-11 15:47 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20220811152851.1520029-1-sashal@kernel.org>
2022-08-11 15:26 ` [PATCH AUTOSEL 5.19 003/105] ath10k: htt_tx: do not interpret Eth frames as WiFi Sasha Levin
2022-08-11 15:26 ` [PATCH AUTOSEL 5.19 004/105] ath10k: fix misreported tx bandwidth for 160Mhz Sasha Levin
2022-08-11 15:26 ` [PATCH AUTOSEL 5.19 009/105] ath10k: fix regdomain info of iw reg set/get Sasha Levin
2022-08-11 15:26 ` [PATCH AUTOSEL 5.19 010/105] bpf, sockmap: Fix sk->sk_forward_alloc warn_on in sk_stream_kill_queues Sasha Levin
2022-08-11 15:26 ` [PATCH AUTOSEL 5.19 015/105] iavf: Add waiting for response from PF in set mac Sasha Levin
2022-08-11 15:27 ` [PATCH AUTOSEL 5.19 023/105] net/mlx5: Add HW definitions of vport debug counters Sasha Levin
2022-08-11 15:27 ` [PATCH AUTOSEL 5.19 026/105] net: phy: marvell-88x2222: set proper phydev->port Sasha Levin
2022-08-11 15:27 ` [PATCH AUTOSEL 5.19 027/105] selftests: mlxsw: resource_scale: Allow skipping a test Sasha Levin
2022-08-11 15:27 ` [PATCH AUTOSEL 5.19 028/105] net: make xpcs_do_config to accept advertising for pcs-xpcs and sja1105 Sasha Levin
2022-08-11 15:38 ` Russell King (Oracle)
2022-08-11 15:27 ` [PATCH AUTOSEL 5.19 029/105] net: stmmac: make mdio register skips PHY scanning for fixed-link Sasha Levin
2022-08-11 15:27 ` [PATCH AUTOSEL 5.19 030/105] net: dsa: ar9331: fix potential dead lock on mdio access Sasha Levin
2022-08-11 15:27 ` [PATCH AUTOSEL 5.19 043/105] mlxsw: cmd: Increase 'config_profile.flood_mode' length Sasha Levin
2022-08-11 15:27 ` [PATCH AUTOSEL 5.19 051/105] ipv6/addrconf: fix timing bug in tempaddr regen Sasha Levin
2022-08-11 15:27 ` [PATCH AUTOSEL 5.19 056/105] octeontx2-af: fix operand size in bitwise operation Sasha Levin
2022-08-11 15:27 ` [PATCH AUTOSEL 5.19 066/105] octeontx2-af: Don't reset previous pfc config Sasha Levin
2022-08-11 15:27 ` [PATCH AUTOSEL 5.19 068/105] bpf: Make non-preallocated allocation low priority Sasha Levin
2022-08-11 15:27 ` [PATCH AUTOSEL 5.19 071/105] selftests/bpf: Do not attach kprobe_multi bench to bpf_dispatcher_xdp_func Sasha Levin
2022-08-11 15:28 ` [PATCH AUTOSEL 5.19 076/105] net: devlink: avoid false DEADLOCK warning reported by lockdep Sasha Levin
2022-08-11 15:56 ` Jakub Kicinski
2022-08-11 15:28 ` [PATCH AUTOSEL 5.19 077/105] bpf: Don't redirect packets with invalid pkt_len Sasha Levin
2022-08-11 15:28 ` Sasha Levin [this message]
2022-08-11 15:28 ` [PATCH AUTOSEL 5.19 082/105] Bluetooth: use memset avoid memory leaks Sasha Levin
2022-08-11 15:28 ` [PATCH AUTOSEL 5.19 083/105] Bluetooth: Collect kcov coverage from hci_rx_work Sasha Levin
2022-08-11 15:28 ` [PATCH AUTOSEL 5.19 085/105] Bluetooth: hci_sync: Check LMP feature bit instead of quirk Sasha Levin
2022-08-11 15:28 ` [PATCH AUTOSEL 5.19 088/105] Bluetooth: hci_sync: Remove HCI_QUIRK_BROKEN_ERR_DATA_REPORTING Sasha Levin
2022-08-11 15:28 ` [PATCH AUTOSEL 5.19 089/105] Bluetooth: mgmt: Fix using hci_conn_abort Sasha Levin
2022-08-11 15:28 ` [PATCH AUTOSEL 5.19 090/105] bpf/selftests: Fix couldn't retrieve pinned program in xdp veth test Sasha Levin
2022-08-11 15:28 ` [PATCH AUTOSEL 5.19 095/105] net: ethernet: stmicro: stmmac: first disable all queues and disconnect in release Sasha Levin
2022-08-11 15:28 ` [PATCH AUTOSEL 5.19 096/105] net: devlink: make sure that devlink_try_get() works with valid pointer during xarray iteration Sasha Levin
2022-08-11 15:54 ` Jakub Kicinski
2022-08-11 15:28 ` [PATCH AUTOSEL 5.19 097/105] Revert "ath11k: add support for hardware rfkill for QCA6390" Sasha Levin
2022-08-11 15:28 ` [PATCH AUTOSEL 5.19 098/105] wifi: rtl8xxxu: Fix the error handling of the probe function Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220811152851.1520029-79-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=biju.das.jz@bp.renesas.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-can@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mailhol.vincent@wanadoo.fr \
--cc=mkl@pengutronix.de \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=socketcan@hartkopp.net \
--cc=stable@vger.kernel.org \
--cc=stefan.maetje@esd.eu \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).