netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Vladimir Oltean <olteanv@gmail.com>
Cc: Woojung Huh <woojung.huh@microchip.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Arun Ramadoss <arun.ramadoss@microchip.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Eric Dumazet <edumazet@google.com>,
	Paolo Abeni <pabeni@redhat.com>,
	kernel@pengutronix.de, Jakub Kicinski <kuba@kernel.org>,
	UNGLinuxDriver@microchip.com,
	"David S. Miller" <davem@davemloft.net>
Subject: Re: [PATCH net-next v3 15/17] net: dsa: microchip: ksz9477: remove unused "on" variable
Date: Fri, 26 Aug 2022 09:51:57 +0200	[thread overview]
Message-ID: <20220826075157.GD2116@pengutronix.de> (raw)
In-Reply-To: <20220825205407.jayiksjrnccpknoj@skbuf>

On Thu, Aug 25, 2022 at 11:54:07PM +0300, Vladimir Oltean wrote:
> On Tue, Aug 23, 2022 at 10:02:29AM +0200, Oleksij Rempel wrote:
> > This variable is not used on ksz9477 side. Remove it.
> > 
> > Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> > ---
> >  drivers/net/dsa/microchip/ksz9477.c | 2 --
> >  1 file changed, 2 deletions(-)
> > 
> > diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
> > index bfefb60ec91bf..609bd63f4cdb1 100644
> > --- a/drivers/net/dsa/microchip/ksz9477.c
> > +++ b/drivers/net/dsa/microchip/ksz9477.c
> > @@ -1070,7 +1070,6 @@ void ksz9477_config_cpu_port(struct dsa_switch *ds)
> >  
> >  			/* enable cpu port */
> >  			ksz9477_port_setup(dev, i, true);
> > -			p->on = 1;
> >  		}
> >  	}
> >  
> > @@ -1080,7 +1079,6 @@ void ksz9477_config_cpu_port(struct dsa_switch *ds)
> >  		p = &dev->ports[i];
> >  
> >  		ksz_port_stp_state_set(ds, i, BR_STATE_DISABLED);
> > -		p->on = 1;
> >  		if (dev->chip_id == 0x00947700 && i == 6) {
> >  			p->sgmii = 1;
> >  		}
> > -- 
> > 2.30.2
> > 
> 
> And it seems like it's not used on ksz8 either. The reason I'm saying
> that is that ksz8_flush_dyn_mac_table() is the only apparent user of
> p->on, and that only for the case where flushing the FDB of all ports is
> requested (port > dev->info->port_cnt). But ksz8_flush_dyn_mac_table()
> (through dev->dev_ops->flush_dyn_mac_table) is only called from DSA's
> ds->ops->port_fast_age() method, and that will never be requested
> "for all ports" (and to my knowledge never was in the past, either).
> Badly ported SDK code would be my guess. So there are more
> simplifications which could be done.

Ok, i'll take a look on it as soon as i get one of ksz8 board in my
fingers.

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

  reply	other threads:[~2022-08-26  7:52 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-23  8:02 [PATCH net-next v3 00/17] net: dsa: microchip: add error handling and register access validation Oleksij Rempel
2022-08-23  8:02 ` [PATCH net-next v3 01/17] net: dsa: microchip: add separate struct ksz_chip_data for KSZ8563 chip Oleksij Rempel
2022-08-23  8:02 ` [PATCH net-next v3 02/17] net: dsa: microchip: do per-port Gbit detection instead of per-chip Oleksij Rempel
2022-08-23  8:02 ` [PATCH net-next v3 03/17] net: dsa: microchip: don't announce extended register support on non Gbit chips Oleksij Rempel
2022-08-23  8:02 ` [PATCH net-next v3 04/17] net: dsa: microchip: allow to pass return values for PHY read/write accesses Oleksij Rempel
2022-08-23  8:02 ` [PATCH net-next v3 05/17] net: dsa: microchip: forward error value on all ksz_pread/ksz_pwrite functions Oleksij Rempel
2022-08-23  8:02 ` [PATCH net-next v3 06/17] net: dsa: microchip: ksz9477: add error handling to ksz9477_r/w_phy Oleksij Rempel
2022-08-23  8:02 ` [PATCH net-next v3 07/17] net: dsa: microchip: ksz8795: add error handling to ksz8_r/w_phy Oleksij Rempel
2022-08-23  8:02 ` [PATCH net-next v3 08/17] net: dsa: microchip: KSZ9893: do not write to not supported Output Clock Control Register Oleksij Rempel
2022-08-23  8:02 ` [PATCH net-next v3 09/17] net: dsa: microchip: add support for regmap_access_tables Oleksij Rempel
2022-08-23  8:02 ` [PATCH net-next v3 10/17] net: dsa: microchip: add regmap_range for KSZ8563 chip Oleksij Rempel
2022-08-23  8:02 ` [PATCH net-next v3 11/17] net: dsa: microchip: ksz9477: remove MII_CTRL1000 check from ksz9477_w_phy() Oleksij Rempel
2022-08-23  8:02 ` [PATCH net-next v3 12/17] net: dsa: microchip: add regmap_range for KSZ9477 chip Oleksij Rempel
2022-08-23  8:02 ` [PATCH net-next v3 13/17] net: dsa: microchip: ksz9477: use internal_phy instead of phy_port_cnt Oleksij Rempel
2022-08-23  8:02 ` [PATCH net-next v3 14/17] net: dsa: microchip: remove unused port phy variable Oleksij Rempel
2022-08-23  8:02 ` [PATCH net-next v3 15/17] net: dsa: microchip: ksz9477: remove unused "on" variable Oleksij Rempel
2022-08-25 20:54   ` Vladimir Oltean
2022-08-26  7:51     ` Oleksij Rempel [this message]
2022-08-23  8:02 ` [PATCH net-next v3 16/17] net: dsa: microchip: remove unused sgmii variable Oleksij Rempel
2022-08-23  8:02 ` [PATCH net-next v3 17/17] net: dsa: microchip: remove IS_9893 flag Oleksij Rempel
2022-08-25  9:00 ` [PATCH net-next v3 00/17] net: dsa: microchip: add error handling and register access validation Paolo Abeni
2022-08-25 21:44   ` Vladimir Oltean
2022-08-25 22:57     ` Jakub Kicinski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220826075157.GD2116@pengutronix.de \
    --to=o.rempel@pengutronix.de \
    --cc=UNGLinuxDriver@microchip.com \
    --cc=andrew@lunn.ch \
    --cc=arun.ramadoss@microchip.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=f.fainelli@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=pabeni@redhat.com \
    --cc=vivien.didelot@gmail.com \
    --cc=woojung.huh@microchip.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).