From: Dmitry Safonov <dima@arista.com>
To: linux-kernel@vger.kernel.org, David Ahern <dsahern@kernel.org>,
Eric Dumazet <edumazet@google.com>
Cc: Dmitry Safonov <dima@arista.com>,
Andy Lutomirski <luto@amacapital.net>,
Ard Biesheuvel <ardb@kernel.org>,
Bob Gilligan <gilligan@arista.com>,
Dan Carpenter <dan.carpenter@oracle.com>,
"David S. Miller" <davem@davemloft.net>,
Dmitry Safonov <0x7f454c46@gmail.com>,
Eric Biggers <ebiggers@kernel.org>,
"Eric W. Biederman" <ebiederm@xmission.com>,
Francesco Ruggeri <fruggeri@arista.com>,
Herbert Xu <herbert@gondor.apana.org.au>,
Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>,
Ivan Delalande <colona@arista.com>,
Jakub Kicinski <kuba@kernel.org>,
Leonard Crestez <cdleonard@gmail.com>,
Paolo Abeni <pabeni@redhat.com>,
Salam Noureddine <noureddine@arista.com>,
Shuah Khan <shuah@kernel.org>,
netdev@vger.kernel.org, linux-crypto@vger.kernel.org
Subject: [PATCH v2 35/35] selftests/fcnal-test.sh: Add TCP-AO tests
Date: Fri, 23 Sep 2022 21:13:19 +0100 [thread overview]
Message-ID: <20220923201319.493208-36-dima@arista.com> (raw)
In-Reply-To: <20220923201319.493208-1-dima@arista.com>
These are basic TCP-AO functionality tests, more detailed coverage with
functional testing is done by selftests/net/tcp_ao library and binaries.
Sample output:
> TEST: Global server - ns-A IP [ OK ]
> TEST: Global server - ns-A loopback IP [ OK ]
> TEST: Device server - ns-A IP [ OK ]
> TEST: No server - ns-A IP [ OK ]
> TEST: No server - ns-A loopback IP [ OK ]
> TEST: Client - ns-B IP [ OK ]
> TEST: Client, device bind - ns-B IP [ OK ]
> TEST: No server, unbound client - ns-B IP [ OK ]
> TEST: No server, device client - ns-B IP [ OK ]
> TEST: Client - ns-B loopback IP [ OK ]
> TEST: Client, device bind - ns-B loopback IP [ OK ]
> TEST: No server, unbound client - ns-B loopback IP [ OK ]
> TEST: No server, device client - ns-B loopback IP [ OK ]
> TEST: Global server, local connection - ns-A IP [ OK ]
> TEST: Global server, local connection - ns-A loopback IP [ OK ]
> TEST: Global server, local connection - loopback [ OK ]
> TEST: Device server, unbound client, local connection - ns-A IP [ OK ]
> TEST: Device server, unbound client, local connection - ns-A loopback IP [ OK ]
> TEST: Device server, unbound client, local connection - loopback [ OK ]
> TEST: Global server, device client, local connection - ns-A IP [ OK ]
> TEST: Global server, device client, local connection - ns-A loopback IP [ OK ]
> TEST: Global server, device client, local connection - loopback [ OK ]
> TEST: Device server, device client, local connection - ns-A IP [ OK ]
> TEST: No server, device client, local conn - ns-A IP [ OK ]
> TEST: MD5: Single address config [ OK ]
> TEST: MD5: Server no config, client uses password [ OK ]
> TEST: MD5: Client uses wrong password [ OK ]
> TEST: MD5: Client address does not match address configured with password [ OK ]
> TEST: MD5: Prefix config [ OK ]
> TEST: MD5: Prefix config, client uses wrong password [ OK ]
> TEST: MD5: Prefix config, client address not in configured prefix [ OK ]
> TEST: TCP-AO [hmac(sha1):12]: Single address config [ OK ]
> TEST: TCP-AO [hmac(sha1):12]: Server no config, client uses password [ OK ]
> TEST: TCP-AO [hmac(sha1):12]: Client uses wrong password [ OK ]
> TEST: TCP-AO [cmac(aes128):12]: Single address config [ OK ]
> TEST: TCP-AO [cmac(aes128):12]: Server no config, client uses password [ OK ]
> TEST: TCP-AO [cmac(aes128):12]: Client uses wrong password [ OK ]
> TEST: TCP-AO [hmac(rmd160):12]: Single address config [ OK ]
> TEST: TCP-AO [hmac(rmd160):12]: Server no config, client uses password [ OK ]
> TEST: TCP-AO [hmac(rmd160):12]: Client uses wrong password [ OK ]
> TEST: TCP-AO [hmac(sha512):12]: Single address config [ OK ]
> TEST: TCP-AO [hmac(sha512):12]: Server no config, client uses password [ OK ]
> TEST: TCP-AO [hmac(sha512):12]: Client uses wrong password [ OK ]
> TEST: TCP-AO [hmac(sha384):12]: Single address config [ OK ]
> TEST: TCP-AO [hmac(sha384):12]: Server no config, client uses password [ OK ]
> TEST: TCP-AO [hmac(sha384):12]: Client uses wrong password [ OK ]
> TEST: TCP-AO [hmac(sha256):12]: Single address config [ OK ]
> TEST: TCP-AO [hmac(sha256):12]: Server no config, client uses password [ OK ]
> TEST: TCP-AO [hmac(sha256):12]: Client uses wrong password [ OK ]
> TEST: TCP-AO [hmac(md5):12]: Single address config [ OK ]
> TEST: TCP-AO [hmac(md5):12]: Server no config, client uses password [ OK ]
> TEST: TCP-AO [hmac(md5):12]: Client uses wrong password [ OK ]
> TEST: TCP-AO [hmac(sha224):12]: Single address config [ OK ]
> TEST: TCP-AO [hmac(sha224):12]: Server no config, client uses password [ OK ]
> TEST: TCP-AO [hmac(sha224):12]: Client uses wrong password [ OK ]
> TEST: TCP-AO [hmac(sha3-512):12]: Single address config [ OK ]
> TEST: TCP-AO [hmac(sha3-512):12]: Server no config, client uses password [ OK ]
> TEST: TCP-AO [hmac(sha3-512):12]: Client uses wrong password [ OK ]
> TEST: TCP-AO: Client address does not match address configured with password [ OK ]
> TEST: TCP-AO: Prefix config [ OK ]
> TEST: TCP-AO: Prefix config, client uses wrong password [ OK ]
> TEST: TCP-AO: Prefix config, client address not in configured prefix [ OK ]
> TEST: TCP-AO: Different key ids [ OK ]
> TEST: TCP-AO: Wrong keyid [ OK ]
> TEST: TCP-AO [cmac(aes128):16]: Single address config [ OK ]
> TEST: TCP-AO [cmac(aes128):16]: Server no config, client uses password [ OK ]
> TEST: TCP-AO [cmac(aes128):16]: Client uses wrong password [ OK ]
> TEST: TCP-AO [hmac(sha1):16]: Single address config [ OK ]
> TEST: TCP-AO [hmac(sha1):16]: Server no config, client uses password [ OK ]
> TEST: TCP-AO [hmac(sha1):16]: Client uses wrong password [ OK ]
> TEST: TCP-AO [cmac(aes128):4]: Single address config [ OK ]
> TEST: TCP-AO [cmac(aes128):4]: Server no config, client uses password [ OK ]
> TEST: TCP-AO [cmac(aes128):4]: Client uses wrong password [ OK ]
> TEST: TCP-AO [hmac(sha1):4]: Single address config [ OK ]
> TEST: TCP-AO [hmac(sha1):4]: Server no config, client uses password [ OK ]
> TEST: TCP-AO [hmac(sha1):4]: Client uses wrong password [ OK ]
> TEST: TCP-AO: add MD5 and TCP-AO for the same peer address [ OK ]
> TEST: TCP-AO: MD5 and TCP-AO on connect() [ OK ]
> TEST: TCP-AO: Exclude TCP options [ OK ]
Signed-off-by: Dmitry Safonov <dima@arista.com>
---
tools/testing/selftests/net/fcnal-test.sh | 239 ++++++++++++++++++++++
1 file changed, 239 insertions(+)
diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh
index 321cbb0b55c4..fdd762408dc2 100755
--- a/tools/testing/selftests/net/fcnal-test.sh
+++ b/tools/testing/selftests/net/fcnal-test.sh
@@ -76,6 +76,12 @@ BCAST_IP=255.255.255.255
MD5_PW=abc123
MD5_WRONG_PW=abc1234
+AO_PW=abc123
+AO_WRONG_PW=abc1234
+AO_HASH_ALGOS="hmac(sha1) cmac(aes128)"
+AO_HASH_ALGOS+=" hmac(rmd160) hmac(sha512)"
+AO_HASH_ALGOS+=" hmac(sha384) hmac(sha256) hmac(md5)"
+AO_HASH_ALGOS+=" hmac(sha224) hmac(sha3-512)"
MCAST=ff02::1
# set after namespace create
@@ -900,6 +906,123 @@ ipv4_tcp_md5_novrf()
log_test $? 2 "MD5: Prefix config, client address not in configured prefix"
}
+#
+# TCP-AO tests without VRF
+#
+ipv4_tcp_ao_algos()
+{
+ # basic use case
+ log_start
+ run_cmd nettest -s -T 100:100 --tcpao_algo=$1 --tcpao_maclen=$2 \
+ -X ${AO_PW} -m ${NSB_IP} &
+ sleep 1
+ run_cmd_nsb nettest -r ${NSA_IP} -T 100:100 --tcpao_algo=$1 \
+ --tcpao_maclen=$2 -X ${AO_PW}
+ log_test $? 0 "TCP-AO [$1:$2]: Single address config"
+
+ # client sends TCP-AO, server not configured
+ log_start
+ show_hint "Should timeout due to TCP-AO password mismatch"
+ run_cmd nettest -s &
+ sleep 1
+ run_cmd_nsb nettest -r ${NSA_IP} -T 100:100 --tcpao_algo=$1 \
+ --tcpao_maclen=$2 -X ${AO_PW}
+ log_test $? 2 "TCP-AO [$1:$2]: Server no config, client uses password"
+
+ # wrong password
+ log_start
+ show_hint "Should timeout since client uses wrong password"
+ run_cmd nettest -s -T 100:100 --tcpao_algo=$1 --tcpao_maclen=$2 \
+ -X ${AO_PW} -m ${NSB_IP} &
+ sleep 1
+ run_cmd_nsb nettest -r ${NSA_IP} -T 100:100 --tcpao_algo=$1 \
+ --tcpao_maclen=$2 -X ${AO_WRONG_PW}
+ log_test $? 2 "TCP-AO [$1:$2]: Client uses wrong password"
+}
+
+ipv4_tcp_ao_novrf()
+{
+ #
+ # single address
+ #
+ for i in $AO_HASH_ALGOS ; do
+ ipv4_tcp_ao_algos $i 12
+ done
+
+ # client from different address
+ log_start
+ show_hint "Should timeout due to TCP-AO address mismatch"
+ run_cmd nettest -s -T 100:100 -X ${AO_PW} -m ${NSB_LO_IP} &
+ sleep 1
+ run_cmd_nsb nettest -r ${NSA_IP} -T 100:100 -X ${AO_PW}
+ log_test $? 2 "TCP-AO: Client address does not match address configured with password"
+
+ # client in prefix
+ log_start
+ run_cmd nettest -s -T 100:100 -X ${AO_PW} -m ${NS_NET} &
+ sleep 1
+ run_cmd_nsb nettest -r ${NSA_IP} -T 100:100 -X ${AO_PW}
+ log_test $? 0 "TCP-AO: Prefix config"
+
+ # client in prefix, wrong password
+ log_start
+ show_hint "Should timeout since client uses wrong password"
+ run_cmd nettest -s -T 100:100 -X ${AO_PW} -m ${NS_NET} &
+ sleep 1
+ run_cmd_nsb nettest -r ${NSA_IP} -T 100:100 -X ${AO_WRONG_PW}
+ log_test $? 2 "TCP-AO: Prefix config, client uses wrong password"
+
+ # client outside of prefix
+ log_start
+ show_hint "Should timeout due to address out of TCP-AO prefix mismatch"
+ run_cmd nettest -s -T 100:100 -X ${AO_PW} -m ${NS_NET} &
+ sleep 1
+ run_cmd_nsb nettest -c ${NSB_LO_IP} -r ${NSA_IP} -T 100:100 -X ${AO_PW}
+ log_test $? 2 "TCP-AO: Prefix config, client address not in configured prefix"
+
+ # TCP-AO more specific tests
+ # sendid != rcvid
+ log_start
+ run_cmd nettest -s -T 100:101 -X ${AO_PW} -m ${NSB_IP} &
+ sleep 1
+ run_cmd_nsb nettest -r ${NSA_IP} -T 101:100 -X ${AO_PW}
+ log_test $? 0 "TCP-AO: Different key ids"
+
+ # Wrong keyid
+ log_start
+ show_hint "Should timeout due to a wrong keyid"
+ run_cmd nettest -s -T 100:100 -X ${AO_PW} -m ${NSB_IP} &
+ sleep 1
+ run_cmd_nsb nettest -r ${NSA_IP} -T 101:101 -X ${AO_PW}
+ log_test $? 2 "TCP-AO: Wrong keyid"
+
+ # Variable maclen
+ ipv4_tcp_ao_algos "cmac(aes128)" 16
+ ipv4_tcp_ao_algos "hmac(sha1)" 16
+ ipv4_tcp_ao_algos "cmac(aes128)" 4
+ ipv4_tcp_ao_algos "hmac(sha1)" 4
+
+ # MD5 and TCP-AO for the same peer
+ log_start
+ run_cmd nettest -s -T 100:100 -M -X ${AO_PW} -m ${NSB_IP}
+ log_test $? 1 "TCP-AO: add MD5 and TCP-AO for the same peer address"
+
+ # Connect with both TCP-AO and MD5 on the socket
+ log_start
+ show_hint "Should fail to connect with both MD5 and TCP-AO on the socket"
+ run_cmd nettest -s -T 100:100 -M -X ${AO_PW} -m ${NSB_IP} &
+ sleep 1
+ run_cmd_nsb nettest -r ${NSA_IP} -T 100:100 -M -X ${AO_PW}
+ log_test $? 1 "TCP-AO: MD5 and TCP-AO on connect()"
+
+ # Exclude TCP options
+ log_start
+ run_cmd nettest -s -T 100:101 -X ${AO_PW} -m ${NSB_IP} --tcpao_excopts &
+ sleep 1
+ run_cmd_nsb nettest -r ${NSA_IP} -T 101:100 -X ${AO_PW} --tcpao_excopts
+ log_test $? 0 "TCP-AO: Exclude TCP options"
+}
+
#
# MD5 tests with VRF
#
@@ -1217,6 +1340,7 @@ ipv4_tcp_novrf()
log_test_addr ${a} $? 1 "No server, device client, local conn"
ipv4_tcp_md5_novrf
+ ipv4_tcp_ao_novrf
}
ipv4_tcp_vrf()
@@ -2488,6 +2612,120 @@ ipv6_tcp_md5_novrf()
log_test $? 2 "MD5: Prefix config, client address not in configured prefix"
}
+ipv6_tcp_ao_algos()
+{
+ # basic use case
+ log_start
+ run_cmd nettest -6 -s -T 100:100 --tcpao_algo=$1 --tcpao_maclen=$2 \
+ -X ${AO_PW} -m ${NSB_IP6} &
+ sleep 1
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -T 100:100 --tcpao_algo=$1 \
+ --tcpao_maclen=$2 -X ${AO_PW}
+ log_test $? 0 "TCP-AO [$1:$2]: Single address config"
+
+ # client sends TCP-AO, server not configured
+ log_start
+ show_hint "Should timeout since server does not have TCP-AO auth"
+ run_cmd nettest -6 -s &
+ sleep 1
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -T 100:100 --tcpao_algo=$1 \
+ --tcpao_maclen=$2 -X ${AO_PW}
+ log_test $? 2 "TCP-AO [$1:$2]: Server no config, client uses password"
+
+ # wrong password
+ log_start
+ show_hint "Should timeout since client uses wrong password"
+ run_cmd nettest -6 -s -T 100:100 --tcpao_algo=$1 --tcpao_maclen=$2 \
+ -X ${AO_PW} -m ${NSB_IP6} &
+ sleep 1
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -T 100:100 --tcpao_algo=$1 \
+ --tcpao_maclen=$2 -X ${AO_WRONG_PW}
+ log_test $? 2 "TCP-AO [$1:$2]: Client uses wrong password"
+}
+
+ipv6_tcp_ao_novrf()
+{
+ #
+ # single address
+ #
+ for i in $AO_HASH_ALGOS ; do
+ ipv6_tcp_ao_algos $i 12
+ done
+
+ # client from different address
+ log_start
+ show_hint "Should timeout since server config differs from client"
+ run_cmd nettest -6 -s -T 100:100 -X ${AO_PW} -m ${NSB_LO_IP6} &
+ sleep 1
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -T 100:100 -X ${AO_PW}
+ log_test $? 2 "TCP-AO: Client address does not match address configured with password"
+
+ # client in prefix
+ log_start
+ run_cmd nettest -6 -s -T 100:100 -X ${AO_PW} -m ${NS_NET6} &
+ sleep 1
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -T 100:100 -X ${AO_PW}
+ log_test $? 0 "TCP-AO: Prefix config"
+
+ # client in prefix, wrong password
+ log_start
+ show_hint "Should timeout since client uses wrong password"
+ run_cmd nettest -6 -s -T 100:100 -X ${AO_PW} -m ${NS_NET6} &
+ sleep 1
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -T 100:100 -X ${AO_WRONG_PW}
+ log_test $? 2 "TCP-AO: Prefix config, client uses wrong password"
+
+ # client outside of prefix
+ log_start
+ show_hint "Should timeout since client address is outside of prefix"
+ run_cmd nettest -6 -s -T 100:100 -X ${AO_PW} -m ${NS_NET6} &
+ sleep 1
+ run_cmd_nsb nettest -6 -c ${NSB_LO_IP6} -r ${NSA_IP6} -T 100:100 -X ${AO_PW}
+ log_test $? 2 "TCP-AO: Prefix config, client address not in configured prefix"
+
+ # TCP-AO more specific tests
+ # sendid != rcvid
+ log_start
+ run_cmd nettest -6 -s -T 100:101 -X ${AO_PW} -m ${NSB_IP6} &
+ sleep 1
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -T 101:100 -X ${AO_PW}
+ log_test $? 0 "TCP-AO: Different key ids"
+
+ # Wrong keyid
+ log_start
+ show_hint "Should timeout due to a wrong keyid"
+ run_cmd nettest -6 -s -T 100:100 -X ${AO_PW} -m ${NSB_IP6} &
+ sleep 1
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -T 101:101 -X ${AO_PW}
+ log_test $? 2 "TCP-AO: Wrong keyid"
+
+ # Variable maclen
+ ipv6_tcp_ao_algos "cmac(aes128)" 16
+ ipv6_tcp_ao_algos "hmac(sha1)" 16
+ ipv6_tcp_ao_algos "cmac(aes128)" 4
+ ipv6_tcp_ao_algos "hmac(sha1)" 4
+
+ # MD5 and TCP-AO for the same peer
+ log_start
+ run_cmd nettest -6 -s -T 100:100 -M -X ${AO_PW} -m ${NSB_IP6}
+ log_test $? 1 "TCP-AO: add MD5 and TCP-AO for the same peer address"
+
+ # Connect with both TCP-AO and MD5 on the socket
+ log_start
+ show_hint "Should fail to connect with both MD5 and TCP-AO on the socket"
+ run_cmd nettest -6 -s -T 100:100 -M -X ${AO_PW} -m ${NSB_IP6} &
+ sleep 1
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -T 100:100 -M -X ${AO_PW}
+ log_test $? 1 "TCP-AO: MD5 and TCP-AO on connect()"
+
+ # Exclude TCP options
+ log_start
+ run_cmd nettest -6 -s -T 100:101 -X ${AO_PW} -m ${NSB_IP6} --tcpao_excopts &
+ sleep 1
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -T 101:100 -X ${AO_PW} --tcpao_excopts
+ log_test $? 0 "TCP-AO: Exclude TCP options"
+}
+
#
# MD5 tests with VRF
#
@@ -2750,6 +2988,7 @@ ipv6_tcp_novrf()
done
ipv6_tcp_md5_novrf
+ ipv6_tcp_ao_novrf
}
ipv6_tcp_vrf()
--
2.37.2
next prev parent reply other threads:[~2022-09-23 20:18 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-23 20:12 [PATCH v2 00/35] net/tcp: Add TCP-AO support Dmitry Safonov
2022-09-23 20:12 ` [PATCH v2 01/35] crypto: Introduce crypto_pool Dmitry Safonov
2022-09-23 20:12 ` [PATCH v2 02/35] crypto_pool: Add crypto_pool_reserve_scratch() Dmitry Safonov
2022-09-23 20:12 ` [PATCH v2 03/35] net/tcp: Separate tcp_md5sig_info allocation into tcp_md5sig_info_add() Dmitry Safonov
2022-09-23 20:12 ` [PATCH v2 04/35] net/tcp: Disable TCP-MD5 static key on tcp_md5sig_info destruction Dmitry Safonov
2022-09-23 20:12 ` [PATCH v2 05/35] net/tcp: Use crypto_pool for TCP-MD5 Dmitry Safonov
2022-09-23 20:12 ` [PATCH v2 06/35] net/ipv6: sr: Switch to using crypto_pool Dmitry Safonov
2022-09-23 20:12 ` [PATCH v2 07/35] tcp: Add TCP-AO config and structures Dmitry Safonov
2022-09-23 20:12 ` [PATCH v2 08/35] net/tcp: Introduce TCP_AO setsockopt()s Dmitry Safonov
2022-09-23 20:12 ` [PATCH v2 09/35] net/tcp: Prevent TCP-MD5 with TCP-AO being set Dmitry Safonov
2022-09-23 20:12 ` [PATCH v2 10/35] net/tcp: Calculate TCP-AO traffic keys Dmitry Safonov
2022-09-23 20:12 ` [PATCH v2 11/35] net/tcp: Add TCP-AO sign to outgoing packets Dmitry Safonov
2022-09-23 20:12 ` [PATCH v2 12/35] net/tcp: Add tcp_parse_auth_options() Dmitry Safonov
2022-09-23 20:12 ` [PATCH v2 13/35] net/tcp: Add AO sign to RST packets Dmitry Safonov
2022-09-23 20:12 ` [PATCH v2 14/35] net/tcp: Add TCP-AO sign to twsk Dmitry Safonov
2022-09-23 20:12 ` [PATCH v2 15/35] net/tcp: Wire TCP-AO to request sockets Dmitry Safonov
2022-09-24 5:23 ` kernel test robot
2022-09-23 20:13 ` [PATCH v2 16/35] net/tcp: Sign SYN-ACK segments with TCP-AO Dmitry Safonov
2022-09-23 20:13 ` [PATCH v2 17/35] net/tcp: Verify inbound TCP-AO signed segments Dmitry Safonov
2022-09-24 5:43 ` kernel test robot
2022-09-23 20:13 ` [PATCH v2 18/35] net/tcp: Add TCP-AO segments counters Dmitry Safonov
2022-09-23 20:13 ` [PATCH v2 19/35] net/tcp: Add TCP-AO SNE support Dmitry Safonov
2022-09-23 20:13 ` [PATCH v2 20/35] net/tcp: Add tcp_hash_fail() ratelimited logs Dmitry Safonov
2022-09-23 20:13 ` [PATCH v2 21/35] net/tcp: Ignore specific ICMPs for TCP-AO connections Dmitry Safonov
2022-09-23 20:13 ` [PATCH v2 22/35] net/tcp: Add option for TCP-AO to (not) hash header Dmitry Safonov
2022-09-23 20:13 ` [PATCH v2 23/35] net/tcp: Add getsockopt(TCP_AO_GET) Dmitry Safonov
2022-09-24 6:44 ` kernel test robot
2022-09-23 20:13 ` [PATCH v2 24/35] net/tcp: Allow asynchronous delete for TCP-AO keys (MKTs) Dmitry Safonov
2022-09-23 20:13 ` [PATCH v2 25/35] selftests/net: Add TCP-AO library Dmitry Safonov
2022-09-23 20:13 ` [PATCH v2 26/35] selftests/net: Verify that TCP-AO complies with ignoring ICMPs Dmitry Safonov
2022-09-23 20:13 ` [PATCH v2 27/35] selftest/net: Add TCP-AO ICMPs accept test Dmitry Safonov
2022-09-23 20:13 ` [PATCH v2 28/35] selftest/tcp-ao: Add a test for MKT matching Dmitry Safonov
2022-09-23 20:13 ` [PATCH v2 29/35] selftest/tcp-ao: Add test for TCP-AO add setsockopt() command Dmitry Safonov
2022-09-23 20:13 ` [PATCH v2 30/35] selftests/tcp-ao: Add TCP-AO + TCP-MD5 + no sign listen socket tests Dmitry Safonov
2022-09-23 20:13 ` [PATCH v2 31/35] selftests/aolib: Add test/benchmark for removing MKTs Dmitry Safonov
2022-09-23 20:13 ` [PATCH v2 32/35] selftests/nettest: Remove client_pw Dmitry Safonov
2022-09-23 20:13 ` [PATCH v2 33/35] selftest/nettest: Rename md5_prefix* => auth_prefix* Dmitry Safonov
2022-09-23 20:13 ` [PATCH v2 34/35] selftests/nettest: Add TCP-AO support Dmitry Safonov
2022-09-23 20:13 ` Dmitry Safonov [this message]
2022-09-23 21:25 ` [PATCH v2 00/35] net/tcp: " Dmitry Safonov
2022-09-27 1:57 ` David Ahern
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220923201319.493208-36-dima@arista.com \
--to=dima@arista.com \
--cc=0x7f454c46@gmail.com \
--cc=ardb@kernel.org \
--cc=cdleonard@gmail.com \
--cc=colona@arista.com \
--cc=dan.carpenter@oracle.com \
--cc=davem@davemloft.net \
--cc=dsahern@kernel.org \
--cc=ebiederm@xmission.com \
--cc=ebiggers@kernel.org \
--cc=edumazet@google.com \
--cc=fruggeri@arista.com \
--cc=gilligan@arista.com \
--cc=herbert@gondor.apana.org.au \
--cc=kuba@kernel.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luto@amacapital.net \
--cc=netdev@vger.kernel.org \
--cc=noureddine@arista.com \
--cc=pabeni@redhat.com \
--cc=shuah@kernel.org \
--cc=yoshfuji@linux-ipv6.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).