[PATCH v6 0/2] Improve virtio performance for 9k mtu

[PATCH v6 0/2] Improve virtio performance for 9k mtu

[Gavin Li]

This small series contains two patches that improves virtio netdevice
performance for 9K mtu when GRO/ guest TSO is disabled.

Gavin Li (2):
  virtio-net: introduce and use helper function for guest gso support
    checks
---
changelog:
v4->v5
- Addressed comments from Michael S. Tsirkin
- Remove unnecessary () in return clause
v1->v2
- Add new patch
---
  virtio-net: use mtu size as buffer length for big packets
---
changelog:
v5->v6
- Addressed comments from Jason and Michael S. Tsirkin
- Remove wrong commit log description
- Rename virtnet_set_big_packets_fields with virtnet_set_big_packets
- Add more test results for different feature combinations
v4->v5
- Addressed comments from Michael S. Tsirkin
- Improve commit message
v3->v4
- Addressed comments from Si-Wei
- Rename big_packets_sg_num with big_packets_num_skbfrags
v2->v3
- Addressed comments from Si-Wei
- Simplify the condition check to enable the optimization
v1->v2
- Addressed comments from Jason, Michael, Si-Wei.
- Remove the flag of guest GSO support, set sg_num for big packets and
  use it directly
- Recalculate sg_num for big packets in virtnet_set_guest_offloads
- Replace the round up algorithm with DIV_ROUND_UP
---

 drivers/net/virtio_net.c | 48 ++++++++++++++++++++++++++--------------
 1 file changed, 32 insertions(+), 16 deletions(-)

-- 
2.31.1

[PATCH v6 1/2] virtio-net: introduce and use helper function for guest gso support checks

[Gavin Li]

Probe routine is already several hundred lines.
Use helper function for guest gso support check.

Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Gavi Teitz <gavi@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
---
changelog:
v4->v5
- Addressed comments from Michael S. Tsirkin
- Remove unnecessary () in return clause
v1->v2
- Add new patch
---
 drivers/net/virtio_net.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index e0e57083d442..f54c7182758f 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -3682,6 +3682,14 @@ static int virtnet_validate(struct virtio_device *vdev)
 	return 0;
 }
 
+static bool virtnet_check_guest_gso(const struct virtnet_info *vi)
+{
+	return virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_TSO4) ||
+		virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_TSO6) ||
+		virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_ECN) ||
+		virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_UFO);
+}
+
 static int virtnet_probe(struct virtio_device *vdev)
 {
 	int i, err = -ENOMEM;
@@ -3777,10 +3785,7 @@ static int virtnet_probe(struct virtio_device *vdev)
 	spin_lock_init(&vi->refill_lock);
 
 	/* If we can receive ANY GSO packets, we must allocate large ones. */
-	if (virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO4) ||
-	    virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO6) ||
-	    virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_ECN) ||
-	    virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_UFO))
+	if (virtnet_check_guest_gso(vi))
 		vi->big_packets = true;
 
 	if (virtio_has_feature(vdev, VIRTIO_NET_F_MRG_RXBUF))
-- 
2.31.1

Re: [PATCH v6 1/2] virtio-net: introduce and use helper function for guest gso support checks

[Jason Wang]

在 2022/9/14 22:49, Gavin Li 写道:
> Probe routine is already several hundred lines.
> Use helper function for guest gso support check.
>
> Signed-off-by: Gavin Li <gavinl@nvidia.com>
> Reviewed-by: Gavi Teitz <gavi@nvidia.com>
> Reviewed-by: Parav Pandit <parav@nvidia.com>
> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
> Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>


Acked-by: Jason Wang <jasowang@redhat.com>


> ---
> changelog:
> v4->v5
> - Addressed comments from Michael S. Tsirkin
> - Remove unnecessary () in return clause
> v1->v2
> - Add new patch
> ---
>   drivers/net/virtio_net.c | 13 +++++++++----
>   1 file changed, 9 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> index e0e57083d442..f54c7182758f 100644
> --- a/drivers/net/virtio_net.c
> +++ b/drivers/net/virtio_net.c
> @@ -3682,6 +3682,14 @@ static int virtnet_validate(struct virtio_device *vdev)
>   	return 0;
>   }
>   
> +static bool virtnet_check_guest_gso(const struct virtnet_info *vi)
> +{
> +	return virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_TSO4) ||
> +		virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_TSO6) ||
> +		virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_ECN) ||
> +		virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_UFO);
> +}
> +
>   static int virtnet_probe(struct virtio_device *vdev)
>   {
>   	int i, err = -ENOMEM;
> @@ -3777,10 +3785,7 @@ static int virtnet_probe(struct virtio_device *vdev)
>   	spin_lock_init(&vi->refill_lock);
>   
>   	/* If we can receive ANY GSO packets, we must allocate large ones. */
> -	if (virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO4) ||
> -	    virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO6) ||
> -	    virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_ECN) ||
> -	    virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_UFO))
> +	if (virtnet_check_guest_gso(vi))
>   		vi->big_packets = true;
>   
>   	if (virtio_has_feature(vdev, VIRTIO_NET_F_MRG_RXBUF))

[PATCH v6 2/2] virtio-net: use mtu size as buffer length for big packets

[Gavin Li]

Currently add_recvbuf_big() allocates MAX_SKB_FRAGS segments for big
packets even when GUEST_* offloads are not present on the device.
However, if guest GSO is not supported, it would be sufficient to
allocate segments to cover just up the MTU size and no further.
Allocating the maximum amount of segments results in a large waste of
buffer space in the queue, which limits the number of packets that can
be buffered and can result in reduced performance.

Therefore, if guest GSO is not supported, use the MTU to calculate the
optimal amount of segments required.

Below is the iperf TCP test results over a Mellanox NIC, using vDPA for
1 VQ, queue size 1024, before and after the change, with the iperf
server running over the virtio-net interface.

MTU(Bytes)/Bandwidth (Gbit/s)
             Before   After
  1500        22.5     22.4
  9000        12.8     25.9

And result of queue size 256.
MTU(Bytes)/Bandwidth (Gbit/s)
             Before   After
  9000        2.15     11.9

With this patch no degradation is observed with multiple below tests and
feature bit combinations. Results are summarized below for q depth of
1024. Interface MTU is 1500 if MTU feature is disabled. MTU is set to 9000
in other tests.

Features/              Bandwidth (Gbit/s)
                         Before   After
mtu off                   20.1     20.2
mtu/indirect on           17.4     17.3
mtu/indirect/packed on    17.2     17.2

Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Gavi Teitz <gavi@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
---
changelog:
v5->v6
- Addressed comments from Jason and Michael S. Tsirkin
- Remove wrong commit log description
- Rename virtnet_set_big_packets_fields with virtnet_set_big_packets
- Add more test results for different feature combinations
v4->v5
- Addressed comments from Michael S. Tsirkin
- Improve commit message
v3->v4
- Addressed comments from Si-Wei
- Rename big_packets_sg_num with big_packets_num_skbfrags
v2->v3
- Addressed comments from Si-Wei
- Simplify the condition check to enable the optimization
v1->v2
- Addressed comments from Jason, Michael, Si-Wei.
- Remove the flag of guest GSO support, set sg_num for big packets and
  use it directly
- Recalculate sg_num for big packets in virtnet_set_guest_offloads
- Replace the round up algorithm with DIV_ROUND_UP
---
 drivers/net/virtio_net.c | 37 ++++++++++++++++++++++++-------------
 1 file changed, 24 insertions(+), 13 deletions(-)

diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index f54c7182758f..7106932c6f88 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -225,6 +225,9 @@ struct virtnet_info {
 	/* I like... big packets and I cannot lie! */
 	bool big_packets;
 
+	/* number of sg entries allocated for big packets */
+	unsigned int big_packets_num_skbfrags;
+
 	/* Host will merge rx buffers for big packets (shake it! shake it!) */
 	bool mergeable_rx_bufs;
 
@@ -1331,10 +1334,10 @@ static int add_recvbuf_big(struct virtnet_info *vi, struct receive_queue *rq,
 	char *p;
 	int i, err, offset;
 
-	sg_init_table(rq->sg, MAX_SKB_FRAGS + 2);
+	sg_init_table(rq->sg, vi->big_packets_num_skbfrags + 2);
 
-	/* page in rq->sg[MAX_SKB_FRAGS + 1] is list tail */
-	for (i = MAX_SKB_FRAGS + 1; i > 1; --i) {
+	/* page in rq->sg[vi->big_packets_num_skbfrags + 1] is list tail */
+	for (i = vi->big_packets_num_skbfrags + 1; i > 1; --i) {
 		first = get_a_page(rq, gfp);
 		if (!first) {
 			if (list)
@@ -1365,7 +1368,7 @@ static int add_recvbuf_big(struct virtnet_info *vi, struct receive_queue *rq,
 
 	/* chain first in list head */
 	first->private = (unsigned long)list;
-	err = virtqueue_add_inbuf(rq->vq, rq->sg, MAX_SKB_FRAGS + 2,
+	err = virtqueue_add_inbuf(rq->vq, rq->sg, vi->big_packets_num_skbfrags + 2,
 				  first, gfp);
 	if (err < 0)
 		give_pages(rq, first);
@@ -3690,13 +3693,27 @@ static bool virtnet_check_guest_gso(const struct virtnet_info *vi)
 		virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_UFO);
 }
 
+static void virtnet_set_big_packets(struct virtnet_info *vi, const int mtu)
+{
+	bool guest_gso = virtnet_check_guest_gso(vi);
+
+	/* If device can receive ANY guest GSO packets, regardless of mtu,
+	 * allocate packets of maximum size, otherwise limit it to only
+	 * mtu size worth only.
+	 */
+	if (mtu > ETH_DATA_LEN || guest_gso) {
+		vi->big_packets = true;
+		vi->big_packets_num_skbfrags = guest_gso ? MAX_SKB_FRAGS : DIV_ROUND_UP(mtu, PAGE_SIZE);
+	}
+}
+
 static int virtnet_probe(struct virtio_device *vdev)
 {
 	int i, err = -ENOMEM;
 	struct net_device *dev;
 	struct virtnet_info *vi;
 	u16 max_queue_pairs;
-	int mtu;
+	int mtu = 0;
 
 	/* Find if host supports multiqueue/rss virtio_net device */
 	max_queue_pairs = 1;
@@ -3784,10 +3801,6 @@ static int virtnet_probe(struct virtio_device *vdev)
 	INIT_WORK(&vi->config_work, virtnet_config_changed_work);
 	spin_lock_init(&vi->refill_lock);
 
-	/* If we can receive ANY GSO packets, we must allocate large ones. */
-	if (virtnet_check_guest_gso(vi))
-		vi->big_packets = true;
-
 	if (virtio_has_feature(vdev, VIRTIO_NET_F_MRG_RXBUF))
 		vi->mergeable_rx_bufs = true;
 
@@ -3853,12 +3866,10 @@ static int virtnet_probe(struct virtio_device *vdev)
 
 		dev->mtu = mtu;
 		dev->max_mtu = mtu;
-
-		/* TODO: size buffers correctly in this case. */
-		if (dev->mtu > ETH_DATA_LEN)
-			vi->big_packets = true;
 	}
 
+	virtnet_set_big_packets(vi, mtu);
+
 	if (vi->any_header_sg)
 		dev->needed_headroom = vi->hdr_len;
 
-- 
2.31.1

Re: [PATCH v6 2/2] virtio-net: use mtu size as buffer length for big packets

[Jason Wang]

在 2022/9/14 22:49, Gavin Li 写道:
> Currently add_recvbuf_big() allocates MAX_SKB_FRAGS segments for big
> packets even when GUEST_* offloads are not present on the device.
> However, if guest GSO is not supported, it would be sufficient to
> allocate segments to cover just up the MTU size and no further.
> Allocating the maximum amount of segments results in a large waste of
> buffer space in the queue, which limits the number of packets that can
> be buffered and can result in reduced performance.
>
> Therefore, if guest GSO is not supported, use the MTU to calculate the
> optimal amount of segments required.
>
> Below is the iperf TCP test results over a Mellanox NIC, using vDPA for
> 1 VQ, queue size 1024, before and after the change, with the iperf
> server running over the virtio-net interface.
>
> MTU(Bytes)/Bandwidth (Gbit/s)
>               Before   After
>    1500        22.5     22.4
>    9000        12.8     25.9
>
> And result of queue size 256.
> MTU(Bytes)/Bandwidth (Gbit/s)
>               Before   After
>    9000        2.15     11.9
>
> With this patch no degradation is observed with multiple below tests and
> feature bit combinations. Results are summarized below for q depth of
> 1024. Interface MTU is 1500 if MTU feature is disabled. MTU is set to 9000
> in other tests.
>
> Features/              Bandwidth (Gbit/s)
>                           Before   After
> mtu off                   20.1     20.2
> mtu/indirect on           17.4     17.3
> mtu/indirect/packed on    17.2     17.2
>
> Signed-off-by: Gavin Li <gavinl@nvidia.com>
> Reviewed-by: Gavi Teitz <gavi@nvidia.com>
> Reviewed-by: Parav Pandit <parav@nvidia.com>
> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
> Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>


Acked-by: Jason Wang <jasowang@redhat.com>


> ---
> changelog:
> v5->v6
> - Addressed comments from Jason and Michael S. Tsirkin
> - Remove wrong commit log description
> - Rename virtnet_set_big_packets_fields with virtnet_set_big_packets
> - Add more test results for different feature combinations
> v4->v5
> - Addressed comments from Michael S. Tsirkin
> - Improve commit message
> v3->v4
> - Addressed comments from Si-Wei
> - Rename big_packets_sg_num with big_packets_num_skbfrags
> v2->v3
> - Addressed comments from Si-Wei
> - Simplify the condition check to enable the optimization
> v1->v2
> - Addressed comments from Jason, Michael, Si-Wei.
> - Remove the flag of guest GSO support, set sg_num for big packets and
>    use it directly
> - Recalculate sg_num for big packets in virtnet_set_guest_offloads
> - Replace the round up algorithm with DIV_ROUND_UP
> ---
>   drivers/net/virtio_net.c | 37 ++++++++++++++++++++++++-------------
>   1 file changed, 24 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> index f54c7182758f..7106932c6f88 100644
> --- a/drivers/net/virtio_net.c
> +++ b/drivers/net/virtio_net.c
> @@ -225,6 +225,9 @@ struct virtnet_info {
>   	/* I like... big packets and I cannot lie! */
>   	bool big_packets;
>   
> +	/* number of sg entries allocated for big packets */
> +	unsigned int big_packets_num_skbfrags;
> +
>   	/* Host will merge rx buffers for big packets (shake it! shake it!) */
>   	bool mergeable_rx_bufs;
>   
> @@ -1331,10 +1334,10 @@ static int add_recvbuf_big(struct virtnet_info *vi, struct receive_queue *rq,
>   	char *p;
>   	int i, err, offset;
>   
> -	sg_init_table(rq->sg, MAX_SKB_FRAGS + 2);
> +	sg_init_table(rq->sg, vi->big_packets_num_skbfrags + 2);
>   
> -	/* page in rq->sg[MAX_SKB_FRAGS + 1] is list tail */
> -	for (i = MAX_SKB_FRAGS + 1; i > 1; --i) {
> +	/* page in rq->sg[vi->big_packets_num_skbfrags + 1] is list tail */
> +	for (i = vi->big_packets_num_skbfrags + 1; i > 1; --i) {
>   		first = get_a_page(rq, gfp);
>   		if (!first) {
>   			if (list)
> @@ -1365,7 +1368,7 @@ static int add_recvbuf_big(struct virtnet_info *vi, struct receive_queue *rq,
>   
>   	/* chain first in list head */
>   	first->private = (unsigned long)list;
> -	err = virtqueue_add_inbuf(rq->vq, rq->sg, MAX_SKB_FRAGS + 2,
> +	err = virtqueue_add_inbuf(rq->vq, rq->sg, vi->big_packets_num_skbfrags + 2,
>   				  first, gfp);
>   	if (err < 0)
>   		give_pages(rq, first);
> @@ -3690,13 +3693,27 @@ static bool virtnet_check_guest_gso(const struct virtnet_info *vi)
>   		virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_UFO);
>   }
>   
> +static void virtnet_set_big_packets(struct virtnet_info *vi, const int mtu)
> +{
> +	bool guest_gso = virtnet_check_guest_gso(vi);
> +
> +	/* If device can receive ANY guest GSO packets, regardless of mtu,
> +	 * allocate packets of maximum size, otherwise limit it to only
> +	 * mtu size worth only.
> +	 */
> +	if (mtu > ETH_DATA_LEN || guest_gso) {
> +		vi->big_packets = true;
> +		vi->big_packets_num_skbfrags = guest_gso ? MAX_SKB_FRAGS : DIV_ROUND_UP(mtu, PAGE_SIZE);
> +	}
> +}
> +
>   static int virtnet_probe(struct virtio_device *vdev)
>   {
>   	int i, err = -ENOMEM;
>   	struct net_device *dev;
>   	struct virtnet_info *vi;
>   	u16 max_queue_pairs;
> -	int mtu;
> +	int mtu = 0;
>   
>   	/* Find if host supports multiqueue/rss virtio_net device */
>   	max_queue_pairs = 1;
> @@ -3784,10 +3801,6 @@ static int virtnet_probe(struct virtio_device *vdev)
>   	INIT_WORK(&vi->config_work, virtnet_config_changed_work);
>   	spin_lock_init(&vi->refill_lock);
>   
> -	/* If we can receive ANY GSO packets, we must allocate large ones. */
> -	if (virtnet_check_guest_gso(vi))
> -		vi->big_packets = true;
> -
>   	if (virtio_has_feature(vdev, VIRTIO_NET_F_MRG_RXBUF))
>   		vi->mergeable_rx_bufs = true;
>   
> @@ -3853,12 +3866,10 @@ static int virtnet_probe(struct virtio_device *vdev)
>   
>   		dev->mtu = mtu;
>   		dev->max_mtu = mtu;
> -
> -		/* TODO: size buffers correctly in this case. */
> -		if (dev->mtu > ETH_DATA_LEN)
> -			vi->big_packets = true;
>   	}
>   
> +	virtnet_set_big_packets(vi, mtu);
> +
>   	if (vi->any_header_sg)
>   		dev->needed_headroom = vi->hdr_len;
>   

Re: [virtio-dev] [PATCH v6 0/2] Improve virtio performance for 9k mtu

[Gavin Li]

On 9/14/2022 10:49 PM, Gavin Li wrote:
> External email: Use caution opening links or attachments
>
>
> This small series contains two patches that improves virtio netdevice
> performance for 9K mtu when GRO/ guest TSO is disabled.
>
> Gavin Li (2):
>    virtio-net: introduce and use helper function for guest gso support
>      checks
> ---
> changelog:
> v4->v5
> - Addressed comments from Michael S. Tsirkin
> - Remove unnecessary () in return clause
> v1->v2
> - Add new patch
> ---
>    virtio-net: use mtu size as buffer length for big packets
> ---
> changelog:
> v5->v6
> - Addressed comments from Jason and Michael S. Tsirkin
> - Remove wrong commit log description
> - Rename virtnet_set_big_packets_fields with virtnet_set_big_packets
> - Add more test results for different feature combinations
> v4->v5
> - Addressed comments from Michael S. Tsirkin
> - Improve commit message
> v3->v4
> - Addressed comments from Si-Wei
> - Rename big_packets_sg_num with big_packets_num_skbfrags
> v2->v3
> - Addressed comments from Si-Wei
> - Simplify the condition check to enable the optimization
> v1->v2
> - Addressed comments from Jason, Michael, Si-Wei.
> - Remove the flag of guest GSO support, set sg_num for big packets and
>    use it directly
> - Recalculate sg_num for big packets in virtnet_set_guest_offloads
> - Replace the round up algorithm with DIV_ROUND_UP
> ---
>
>   drivers/net/virtio_net.c | 48 ++++++++++++++++++++++++++--------------
>   1 file changed, 32 insertions(+), 16 deletions(-)
>
> --
> 2.31.1
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
> For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org
Did you get a chance to pull these short series?

Re: [virtio-dev] [PATCH v6 0/2] Improve virtio performance for 9k mtu

[Michael S. Tsirkin]

On Thu, Sep 29, 2022 at 02:50:00PM +0800, Gavin Li wrote:
> 
> On 9/14/2022 10:49 PM, Gavin Li wrote:
> > External email: Use caution opening links or attachments
> > 
> > 
> > This small series contains two patches that improves virtio netdevice
> > performance for 9K mtu when GRO/ guest TSO is disabled.
> > 
> > Gavin Li (2):
> >    virtio-net: introduce and use helper function for guest gso support
> >      checks
> > ---
> > changelog:
> > v4->v5
> > - Addressed comments from Michael S. Tsirkin
> > - Remove unnecessary () in return clause
> > v1->v2
> > - Add new patch
> > ---
> >    virtio-net: use mtu size as buffer length for big packets
> > ---
> > changelog:
> > v5->v6
> > - Addressed comments from Jason and Michael S. Tsirkin
> > - Remove wrong commit log description
> > - Rename virtnet_set_big_packets_fields with virtnet_set_big_packets
> > - Add more test results for different feature combinations
> > v4->v5
> > - Addressed comments from Michael S. Tsirkin
> > - Improve commit message
> > v3->v4
> > - Addressed comments from Si-Wei
> > - Rename big_packets_sg_num with big_packets_num_skbfrags
> > v2->v3
> > - Addressed comments from Si-Wei
> > - Simplify the condition check to enable the optimization
> > v1->v2
> > - Addressed comments from Jason, Michael, Si-Wei.
> > - Remove the flag of guest GSO support, set sg_num for big packets and
> >    use it directly
> > - Recalculate sg_num for big packets in virtnet_set_guest_offloads
> > - Replace the round up algorithm with DIV_ROUND_UP
> > ---
> > 
> >   drivers/net/virtio_net.c | 48 ++++++++++++++++++++++++++--------------
> >   1 file changed, 32 insertions(+), 16 deletions(-)
> > 
> > --
> > 2.31.1
> > 
> > 
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
> > For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org
> Did you get a chance to pull these short series?

Not in net-next yet for some reason, I was hoping it
will get some testing here. I'll put it in my tree
for next for now so it gets tested. Thanks!

Re: [PATCH v6 0/2] Improve virtio performance for 9k mtu

[Michael S. Tsirkin]

On Wed, Sep 14, 2022 at 05:49:09PM +0300, Gavin Li wrote:
> This small series contains two patches that improves virtio netdevice
> performance for 9K mtu when GRO/ guest TSO is disabled.
> 
> Gavin Li (2):
>   virtio-net: introduce and use helper function for guest gso support
>     checks


series:

Acked-by: Michael S. Tsirkin <mst@redhat.com>

this is net-next material


> ---
> changelog:
> v4->v5
> - Addressed comments from Michael S. Tsirkin
> - Remove unnecessary () in return clause
> v1->v2
> - Add new patch
> ---
>   virtio-net: use mtu size as buffer length for big packets
> ---
> changelog:
> v5->v6
> - Addressed comments from Jason and Michael S. Tsirkin
> - Remove wrong commit log description
> - Rename virtnet_set_big_packets_fields with virtnet_set_big_packets
> - Add more test results for different feature combinations
> v4->v5
> - Addressed comments from Michael S. Tsirkin
> - Improve commit message
> v3->v4
> - Addressed comments from Si-Wei
> - Rename big_packets_sg_num with big_packets_num_skbfrags
> v2->v3
> - Addressed comments from Si-Wei
> - Simplify the condition check to enable the optimization
> v1->v2
> - Addressed comments from Jason, Michael, Si-Wei.
> - Remove the flag of guest GSO support, set sg_num for big packets and
>   use it directly
> - Recalculate sg_num for big packets in virtnet_set_guest_offloads
> - Replace the round up algorithm with DIV_ROUND_UP
> ---
> 
>  drivers/net/virtio_net.c | 48 ++++++++++++++++++++++++++--------------
>  1 file changed, 32 insertions(+), 16 deletions(-)
> 
> -- 
> 2.31.1