From: Saeed Mahameed <saeed@kernel.org>
To: "David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Eric Dumazet <edumazet@google.com>
Cc: Saeed Mahameed <saeedm@nvidia.com>,
netdev@vger.kernel.org, Tariq Toukan <tariqt@nvidia.com>
Subject: [PATCH net-next 00/15] ] mlx5 xsk updates part4 and more
Date: Sat, 1 Oct 2022 21:56:17 -0700 [thread overview]
Message-ID: <20221002045632.291612-1-saeed@kernel.org> (raw)
From: Saeed Mahameed <saeedm@nvidia.com>
1) Final part of xsk improvements,
in this series Maxim continues to improve xsk implementation
a) XSK Busy polling support
b) Use KLM to avoid Frame overrun in unaligned mode
c) Optimize unaligned more for certain frame sizes
d) Other straight forward minor optimizations.
part 1: https://lore.kernel.org/netdev/20220927203611.244301-1-saeed@kernel.org/
part 2: https://lore.kernel.org/netdev/20220929072156.93299-1-saeed@kernel.org/
part 3: https://lore.kernel.org/netdev/20220930162903.62262-1-saeed@kernel.org/
2) Oversize packets firmware counter, from Gal.
3) Set default grace period for health reporters based on function type
4) Some minor E-Switch improvements
Chris Mi (1):
net/mlx5: E-switch, Don't update group if qos is not enabled
Gal Pressman (1):
net/mlx5e: Expose rx_oversize_pkts_buffer counter
Jianbo Liu (1):
net/mlx5: E-Switch, Return EBUSY if can't get mode lock
Maher Sanalla (1):
net/mlx5: Set default grace period based on function type
Maxim Mikityanskiy (9):
net/mlx5e: xsk: Flush RQ on XSK activation to save memory
net/mlx5e: xsk: Set napi_id to support busy polling
net/mlx5e: xsk: Include XSK skb_from_cqe callbacks in INDIRECT_CALL
net/mlx5e: xsk: Improve need_wakeup logic
net/mlx5e: xsk: Use umr_mode to calculate striding RQ parameters
net/mlx5e: Improve MTT/KSM alignment
net/mlx5e: xsk: Use KLM to protect frame overrun in unaligned mode
net/mlx5e: xsk: Print a warning in slow configurations
net/mlx5e: xsk: Optimize for unaligned mode with 3072-byte frames
Moshe Shemesh (1):
net/mlx5: Start health poll at earlier stage of driver load
Roi Dayan (1):
net/mlx5: E-Switch, Allow offloading fwd dest flow table with vport
drivers/net/ethernet/mellanox/mlx5/core/en.h | 18 +-
.../ethernet/mellanox/mlx5/core/en/params.c | 203 ++++++++++++++----
.../ethernet/mellanox/mlx5/core/en/params.h | 24 ++-
.../ethernet/mellanox/mlx5/core/en/xsk/pool.c | 18 ++
.../ethernet/mellanox/mlx5/core/en/xsk/rx.c | 57 ++++-
.../ethernet/mellanox/mlx5/core/en/xsk/rx.h | 14 --
.../ethernet/mellanox/mlx5/core/en/xsk/tx.h | 12 --
.../ethernet/mellanox/mlx5/core/en_ethtool.c | 4 +-
.../net/ethernet/mellanox/mlx5/core/en_main.c | 125 ++++++++---
.../net/ethernet/mellanox/mlx5/core/en_rx.c | 9 +-
.../ethernet/mellanox/mlx5/core/en_stats.c | 21 +-
.../ethernet/mellanox/mlx5/core/en_stats.h | 4 +
.../net/ethernet/mellanox/mlx5/core/en_tc.c | 2 +-
.../net/ethernet/mellanox/mlx5/core/en_txrx.c | 33 ++-
.../net/ethernet/mellanox/mlx5/core/esw/qos.c | 6 +-
.../mellanox/mlx5/core/eswitch_offloads.c | 16 +-
.../net/ethernet/mellanox/mlx5/core/health.c | 29 ++-
.../net/ethernet/mellanox/mlx5/core/main.c | 17 +-
include/linux/mlx5/driver.h | 5 +
include/linux/mlx5/mlx5_ifc.h | 8 +-
20 files changed, 466 insertions(+), 159 deletions(-)
--
2.37.3
next reply other threads:[~2022-10-02 5:14 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-02 4:56 Saeed Mahameed [this message]
2022-10-02 4:56 ` [PATCH net-next 01/15] net/mlx5e: xsk: Flush RQ on XSK activation to save memory Saeed Mahameed
2022-10-02 4:56 ` [PATCH net-next 02/15] net/mlx5e: xsk: Set napi_id to support busy polling Saeed Mahameed
2022-10-02 4:56 ` [PATCH net-next 03/15] net/mlx5e: xsk: Include XSK skb_from_cqe callbacks in INDIRECT_CALL Saeed Mahameed
2022-10-02 4:56 ` [PATCH net-next 04/15] net/mlx5e: xsk: Improve need_wakeup logic Saeed Mahameed
2022-10-02 4:56 ` [PATCH net-next 05/15] net/mlx5e: xsk: Use umr_mode to calculate striding RQ parameters Saeed Mahameed
2022-10-02 4:56 ` [PATCH net-next 06/15] net/mlx5e: Improve MTT/KSM alignment Saeed Mahameed
2022-10-02 4:56 ` [PATCH net-next 07/15] net/mlx5e: xsk: Use KLM to protect frame overrun in unaligned mode Saeed Mahameed
2022-10-02 4:56 ` [PATCH net-next 08/15] net/mlx5e: xsk: Print a warning in slow configurations Saeed Mahameed
2022-10-02 4:56 ` [PATCH net-next 09/15] net/mlx5e: xsk: Optimize for unaligned mode with 3072-byte frames Saeed Mahameed
2022-10-02 4:56 ` [PATCH net-next 10/15] net/mlx5e: Expose rx_oversize_pkts_buffer counter Saeed Mahameed
2022-10-02 4:56 ` [PATCH net-next 11/15] net/mlx5: Start health poll at earlier stage of driver load Saeed Mahameed
2022-10-02 4:56 ` [PATCH net-next 12/15] net/mlx5: Set default grace period based on function type Saeed Mahameed
2022-10-02 4:56 ` [PATCH net-next 13/15] net/mlx5: E-Switch, Allow offloading fwd dest flow table with vport Saeed Mahameed
2022-10-02 4:56 ` [PATCH net-next 14/15] net/mlx5: E-switch, Don't update group if qos is not enabled Saeed Mahameed
2022-10-02 4:56 ` [PATCH net-next 15/15] net/mlx5: E-Switch, Return EBUSY if can't get mode lock Saeed Mahameed
2022-10-04 0:10 ` [PATCH net-next 00/15] ] mlx5 xsk updates part4 and more patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221002045632.291612-1-saeed@kernel.org \
--to=saeed@kernel.org \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=saeedm@nvidia.com \
--cc=tariqt@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).