[PATCH AUTOSEL 5.19 61/73] wifi: rt2x00: set SoC wmac clock register

[Sasha Levin <sashal@kernel.org>]

From: Daniel Golle <daniel@makrotopia.org>

[ Upstream commit cbde6ed406a51092d9e8a2df058f5f8490f27443 ]

Instead of using the default value 33 (pci), set US_CYC_CNT init based
on Programming guide:
If available, set chipset bus clock with fallback to cpu clock/3.

Reported-by: Serge Vasilugin <vasilugin@yandex.ru>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/3e275d259f476f597dab91a9c395015ef3fe3284.1663445157.git.daniel@makrotopia.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/ralink/rt2x00/rt2800lib.c    | 21 +++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
index c8fd4a1f9ed1..1efb80a98397 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -6131,6 +6131,27 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 		reg = rt2800_register_read(rt2x00dev, US_CYC_CNT);
 		rt2x00_set_field32(&reg, US_CYC_CNT_CLOCK_CYCLE, 125);
 		rt2800_register_write(rt2x00dev, US_CYC_CNT, reg);
+	} else if (rt2x00_is_soc(rt2x00dev)) {
+		struct clk *clk = clk_get_sys("bus", NULL);
+		int rate;
+
+		if (IS_ERR(clk)) {
+			clk = clk_get_sys("cpu", NULL);
+
+			if (IS_ERR(clk)) {
+				rate = 125;
+			} else {
+				rate = clk_get_rate(clk) / 3000000;
+				clk_put(clk);
+			}
+		} else {
+			rate = clk_get_rate(clk) / 1000000;
+			clk_put(clk);
+		}
+
+		reg = rt2800_register_read(rt2x00dev, US_CYC_CNT);
+		rt2x00_set_field32(&reg, US_CYC_CNT_CLOCK_CYCLE, rate);
+		rt2800_register_write(rt2x00dev, US_CYC_CNT, reg);
 	}
 
 	reg = rt2800_register_read(rt2x00dev, HT_FBK_CFG0);
-- 
2.35.1